Protection Module for Surge Protection Barrier M-LB-1.275.M

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

データシート(PDF):

技術データ M-LB-1.275.M

General specifications
Device type		type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1
Number of protected supply lines		1
Electrical specifications
Maximum continuous operating voltage		275 V AC
Nominal discharge current (8/20 µs)		20 kA
Max. surge current (8/20 µs)		40 kA
Indicators/settings
Display elements		status display operating state (green) fault indication (red)
Directive conformity
Low voltage
	Directive 2014/35/EU	EN 61643-11:2012
Conformity
Degree of protection		IEC 60529
Shock resistance		EN 60068-2
Vibration resistance		EN 60068-2
Ambient conditions
Ambient temperature		-40 ... 80 °C (-40 ... 176 °F)
Mechanical specifications
Degree of protection		IP20
Material
	Housing	thermoplastic, color grey , UL 94 V-0
Mass		approx. 50 g
Dimensions		18 x 45 x 50 mm (0.7 x 1.8 x 2 inch) (W x H x D) , 1 TE acc. to DIN 43880
	Height	45 mm
	Width	18 mm
	Depth	50 mm
Mounting		in the surge protection barrier M-LB-.**.
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Certificates	認証番号	言語	ファイルタイプ	ファイルサイズ
USA UL Surge Protective Device UL	E346845 UL (VZCA2)	ALL	PDF	235 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0925A	ALL	PDF	67 KB

Accessory of

	M-LB-2.275TT.D Surge Protection Barrier
	Surge protection for 2 supply lines, Type 2 acc. to EN 61643-11, For TT and TN systems (230 V AC), Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 2pa

	M-LB-4.275TNS.D Surge Protection Barrier
	Surge protection for 4 supply lines, Type 2 acc. to EN 61643-11, For TN-S systems (230 V AC/400 V AC), Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 4pa

	M-LB-4.275TT.D Surge Protection Barrier
	Surge protection for 4 supply lines, Type 2 acc. to EN 61643-11, For TT and TN-S systems (230 V AC/400 V AC), Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 4pa

	M-LB-3.275TNC.D Surge Protection Barrier
	Surge protection for 3 supply lines, Type 2 acc. to EN 61643-11, For TN-C systems (230 V AC/400 V AC), Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 3pa

	M-LB-1.275.D Surge Protection Barrier
	Surge protection for 1 supply line, Type 2 acc. to EN 61643-11, For 230 V, Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 1pa

	M-LB-2.275TN.D Surge Protection Barrier
	Surge protection for 2 supply lines, Type 2 acc. to EN 61643-11, For TN systems (230 V AC), Pre-wired unit, Operating state and fault indication of every protected line, Fault indication output, DIN rail mountable, Device type: type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1, Number of protected supply lines: 2pa