Magnetic Immersion Probe for Limit Value Detection LML-S

Sensor for limit value detection in liquids
Media contacting parts of stainless steel
Mounting without removing the float (G5 and G6)

Technical Data
Product Documentation
Approvals
お問い合わせ

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

データシート(PDF):

技術データ LML-S

General specifications
Function principle		ring magnet as switching element in the float, reed contact, change-over contact number of contacts: - version LML1: 1 contact - version LML2: 2 contacts - version LML3: 3 contacts
Series		LML-S
Supply
Rated voltage		250 V AC/DC
Current consumption		1 A
Power consumption		40 VA
Output
Connection		This device may be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements.
Directive conformity
Low voltage
	Directive 2014/35/EU	EN 61010-1:2010
Conformity
Degree of protection		IEC 60529:2000
Operating conditions
Installation conditions
	Switching point	position according to specification
Process conditions
	Process temperature	version LML: -30 ... 150 °C (-22 ... 302 °F) version LML-PVC1: -10 ... 80 °C (14 ... 176 °F)
	Process pressure (static pressure)	≤ 25 bar (362.6 psi)
	Density	version S2: ≥ 0.8 g/cm³ version S3: ≥ 0.7 g/cm³
Ambient conditions
Ambient temperature		-20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Degree of protection		IP66 / IP68
Connection		version LML: terminal box, max. 9 terminals version LML-PVC1: connection cable 1 m (3.3 ft), 0.75 mm²
Material		float, guide tube, process connection: stainless steel 1.4571/316Ti connection cable: PVC terminal box: aluminum die-casting
Dimensions		float: - version S2: cylinder ∅44 mm x 52 mm - version S3: ball ∅52 mm guide tube: ∅12 mm, max. length 3000 mm terminal box: 80 x 75 x 55 mm
Process connection		thread G3/8A, G1-1/2A, G2A to DIN/ISO 228/1
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Accessories
Designation		- LML-Z11 set collar, 1.4571/316Ti - LML-FS2 float, cylinder, Ø44 mm x 52 mm, 1.4571/316Ti - LML-FS3 float, ball, Ø52 mm, 1.4571/316Ti

Classifications

System	Classcode
ECLASS 13.0	27200502
ECLASS 12.0	27200502
ECLASS 11.0	27200502
ECLASS 10.0.1	27200502
ECLASS 9.0	27200502
ECLASS 8.0	27200502
ECLASS 5.1	27200502
ETIM 9.0	EC001447
ETIM 8.0	EC001447
ETIM 7.0	EC001447
ETIM 6.0	EC001447
ETIM 5.0	EC001447
UNSPSC 12.1	41111950

Details: LML-S

Product Documentation: LML-S

Safety and Security Documentation	言語	ファイルタイプ	ファイルサイズ
Instruction manual	ENG	PDF	43 KB
Manuals
Manual	ENG	PDF	2114 KB

Approvals: LML-S

Declaration of Conformity	認証番号	言語	ファイルタイプ	ファイルサイズ
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-2593A	ALL	PDF	73 KB
Contamination Declaration
Contamination declaration / Kontaminationserklärung		ALL	PDF	137 KB