Ex pxb motor purge and pressurization control unit 6100-MP-EX-*
- Certified for ATEX and IECEx Zone 1
- Maximum flow rate of 14,000 l/min
- Intrinsically safe user interface for programming and monitoring the system
- Control Unit monitors system operation and controls enclosure power
- Auxiliary contact outputs for alarm or control
- Multiple temperature inputs for monitoring and control
- Automatic pressure compensation for excess leakage from motor
注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。
データシート(PDF):
技術データ 6100-MP-EX-*
| 型番 |
|---|
| 6100 series Ex pxb motor purge and pressurization system control unit |
| General specifications | ||
|---|---|---|
| Operating mode | manual, semi-automatic, or fully automatic - programmable | |
| Series | 6100 Series | |
| System | Ex pxb Purge | |
| Number of volume exchanges | 4 to 19 | |
| Hazardous environment | gas | |
| Supply | ||
| Rated voltage | 100 ... 250 V AC, 50 ... 60 Hz / 0.2 A 20 ... 30 V DC / 0.6 A |
|
| Electrical specifications | ||
| Connection | ||
| Power | Ex e terminal blocks | |
| Connection | 6000-ISB DIN mounted terminal | |
| Input | ||
| Input type | IS 1: Dedicated for 6000-TEMP-01 (optional) IS 2: Dedicated for 6100-MP-LPP Input 1: SRM, discrete input, Intrinsically Safe Input 2: SRM, discrete input, Intrinsically Safe Input 3: Dedicated for EPV-6100-MP, Flow Signal Input 4: Dedicated high pressure switch, Max Pressure Signal (optional) |
|
| Output | ||
| Output I | AUX 1 | |
| Output type | Dry contacts, SPDT | |
| Inrush current | 5 A | |
| Contact loading | 2 A at 240 V AC resistive load 2 A at 24 V DC |
|
| Output II | AUX 2 | |
| Output type | Dry contacts, SPDT | |
| Inrush current | 5 A | |
| Contact loading | 2 A at 240 V AC resistive load 2 A at 24 V DC |
|
| Output III | enclosure 1 and 2 | |
| Output type | Dry contacts (2) SPST, NO | |
| Inrush current | 72 A | |
| Contact loading | 8 A at 240 V AC / 120 V AC resistive load 8 A at 24 V DC |
|
| Indicators/settings | ||
| LED indication | Safe pressure: Blue - safe pressure is achieved Enclosure power: Green - power on; Red - power off Rapid exchange: Blue - purging is running System bypass: Yellow - bypass is activated Alarm fault: Red (blinking) - any alarm input detected; Red (solid) - fault |
|
| Pneumatic parameters | ||
| Protective gas supply | regulated and filtered air or inert gas | |
| Pressure requirement | regulated side: 1.4 ... 8.3 bar [20 ... 120 psig) unregulated side: 4.1 ... 8.3 bar [65 ... 120 psig) |
|
| Safe pressure | 0.62 mbar [0.25 in wc / 6.4 mm wc] minimum for 6100-MP-LPP-* | |
| Purge flow and enclosure pressure rate | 2000 l/m ... 14000 l/m see EPV-6100 datasheet for flow rate steps |
|
| Valve flows | pressurization valve: manual gate valve purging valve: pilot drive angle seat valve pilot valve: intrinsically safe solenoid valve |
|
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN 50581:2012 | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 60 °C (32 ... 140 °F) Standard version -20 ... 60 °C (-4 ... 140 °F) Low temp version, no regulator version |
|
| Storage temperature | 0 ... 80 °C (32 ... 176 °F) Standard version -20 ... 80 °C (-4 ... 176 °F) Low temp version, no regulator version |
|
| Relative humidity | 5 ... 95 %, noncondensing | |
| Vibration resistance | 1 g , 10 ... 150 Hz , all axes | |
| Impact resistance | 15 g, 11 ms, all axes | |
| Mechanical specifications | ||
| Connection type | Terminals | |
| Core cross section | see manual | |
| Degree of protection | IP66 | |
| Cable entry | 3 x M16 holes, plugs that are included are not hazardous-location rated 4 x M20 holes, plugs that are included are not hazardous-location rated |
|
| Material | inlet and outlet: 1¼ inch NPTF, 316 stainless steel internal piping: copper bulkhead fittings: 316 stainless steel (no regulator model) gate valve: bronze, Grafoil seals purging valve: 316 stainless steel, PTFE seals solenoid valve: brass housing: 316L stainless steel regulator: zinc (standard temp); aluminum (low temp); N/A (no regulator) filter (pneumatic): aluminum tubing (pneumatic): nylon fittings (pneumatic): nickel-plated brass |
|
| Mass | 47.2 kg (104 lb) | |
| Dimensions | 216 mm x 508 mm x 770 mm (8.5 in x 20 in x 30.3 in) | |
| Height | 762 mm | |
| Width | 558 mm | |
| Depth | 213 mm | |
| Data for application in connection with hazardous areas | ||
| Certificate | CML 19 ATEX 1425X | |
| Marking |  II 2G Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018 EN 60079-1:2014 EN 60079-2:2014 EN 60079-7:2015 EN 60079-11:2012 |
|
| International approvals | ||
| IECEx approval | IECEx CML 19.0156X Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb |
|
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Supplemental Standards : EN 61010-1:2010 |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180591 |
| ECLASS 12.0 | 27180591 |
| ECLASS 11.0 | 27180591 |
| ECLASS 10.0.1 | 27293101 |
| ECLASS 9.0 | 27293101 |
| ECLASS 8.0 | 27293101 |
| ECLASS 5.1 | 40050501 |
| ETIM 9.0 | EC000243 |
| ETIM 8.0 | EC000243 |
| ETIM 7.0 | EC000243 |
| ETIM 6.0 | EC000243 |
| ETIM 5.0 | EC000243 |
| UNSPSC 12.1 | 39121303 |
Details: 6100-MP-EX-*
Informative Literature: 6100-MP-EX-*
| We are sorry, there are no documents for your language selection. Please select another language. |
Product Documentation: 6100-MP-EX-*
| Product information | 言語 | ファイルタイプ | ファイルサイズ |
|---|---|---|---|
| Basic Explosion Protection Compendium - Type of Protection "Purge and Pressurization" | ENG | 3860 KB | |
| Safety and Security Documentation | |||
| Instruction manual | ENG | 172 KB | |
| Manuals | |||
| Manual | ENG | 5218 KB | |
Approvals: 6100-MP-EX-*
| Certificates | 認証番号 | 言語 | ファイルタイプ | ファイルサイズ |
|---|---|---|---|---|
| Brasil Certificate of Compliance | DNV 24.0062 X | ALL | 421 KB | |
| Europe CML ATEX Certificate II 2 G | CML 19ATEX1425X | ALL | 118 KB | |
| IECEx Certificate of Conformity | IECEx CML 19.0156X | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F) | DOC-B0D7C | ALL | 113 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-B0F6 | ALL | 160 KB | |
関連製品: 6100-MP-EX-*
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
株式会社 ピーアンドエフ
〒220-0022
神奈川県横浜市西区花咲町6-145
横浜花咲ビル5F 日本
日本
sales@jp.pepperl-fuchs.com
+81 45 6249077
株式会社ピーアンドエフ
大阪府豊中市新千里東町1-5-3
千里朝日阪急ビル15階
〒560-0082 大阪
日本
sales@jp.pepperl-fuchs.com
+81 6 6836-5620
© 2024 All Rights Reserved.
Pepperl+Fuchsはグローバルオートメーション市場向けにセンサや部品の開発を行っており、革新的かつ高品質な技術躍進のために日々努力を続けています。ドイツ・アメリカ・シンガポール・ハンガリー・インドネシア・ベトナムに生産拠点があり、すべての工場でISO9001認証を取得しています。