Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne
NBB2-12GM70-A2-V1
| General specifications |
| Switching function | complementary |
| Output type | PNP |
| Rated operating distance | 2 mm |
| Installation | flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 1.62 mm |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2)
12 mm x 12 mm x 1 mm |
| Reduction factor rAl | 0.29 |
| Reduction factor rCu | 0.23 |
| Reduction factor r304 | 0.78 |
| Reduction factor rBrass | 0.42 |
| Output type | 4-wire |
| Nominal ratings |
| Operating voltage | 5 ... 36 V |
| Switching frequency | 0 ... 3500 Hz |
| Hysteresis | typ. 5 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 1 V |
| Operating current | 0 ... 200 mA |
| Off-state current | max. 20 µA |
| No-load supply current | ≤ 15 mA |
| Time delay before availability | ≤ 10 ms |
| Switching state indicator | Multihole-LED, yellow |
| Functional safety related parameters |
| MTTFd | 1255 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Conformity |
| PWIS conformity | VDMA 24364-A1/B2/C1/T100°C-W |
| Compliance with standards and directives |
| Standard conformity | |
| Standards | EN IEC 60947-5-2 |
| Approvals and certificates |
| Protection class | II |
| Rated insulation voltage | 36 V |
| Rated impulse withstand voltage | 500 V |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Marine approval | DNVGL TAA00003AK |
| Ambient conditions |
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
| Connection type | Connector plug |
| Housing material | brass , white bronze coated |
| Sensing face | PBT , green |
| Degree of protection | IP65 / IP66 / IP67 / IP68 |
| Connector | |
| Threading | M12 x 1 |
| Number of pins | 4 |
| Mass | 29 g |
| Dimensions | |
| Length | 82.5 mm |
| Diameter | 12 mm |
| Mounting | with nuts, M12 |
| Tightening torque | 0 ... 10 Nm |
| General information |
| Scope of delivery | 2 self locking nuts in scope of delivery |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details:
NBB2-12GM70-A2-V1
Design / Simulation:
NBB2-12GM70-A2-V1
Approvals:
NBB2-12GM70-A2-V1
Produkty powiązane:
NBB2-12GM70-A2-V1
| Accessories |
|
|
|
| Mounting flange, 12 mmfa |
|
|
|
|
| Plastic mounting adapter, 12 mmfa |
|
|
|
|
| Quick mounting bracket with dead stopfa |
|
|
|
|
| Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Female connector M12 straight A-coded 4-pin, for cable diameter 4 - 6 mm, field-attachablefa |
|
|
|
|
| Female connector M12 angled A-coded 4-pin, for cable diameter 4 - 6 mm, field-attachablefa |
|
|
|
|
| Mounting brackets for sensorsfa |
|
|
|
|
| Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa |
|
|
|
|
| Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa |
|
+48 22 256 9770