Connector box for barcode scanner CBX500-KIT-B6
- Connect up to 32 scanners to a network with ID-NetTM
- PROFIBUS interface
- Easy scanner connection by means of clamp terminals
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne CBX500-KIT-B6
| Opis produktu |
|---|
| PROFIBUS Connector box for barcode scanner |
| Indicators/operating means | ||
|---|---|---|
| Display elements | 5 LEDs (POWER, TRIGGER, IN 2, OUT 1, OUT 2) | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC PELV | |
| Current consumption | max. 2.5 A | |
| Power consumption | max. 3 W | |
| Interface | ||
| Physical | RS-485 | |
| Protocol | PROFIBUS DP V0 and V1 | |
| Transfer rate | 9.6; 19.2; 93.75; 187.5; 500; 1500 kBit/s 3; 6; 12 Mbit/s self-synchronizing |
|
| Compliance with standards and directives | ||
| Directive conformity | 89/336 EWG | |
| Standard conformity | ||
| Product standard | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
|
| Noise immunity | EN 61000-6-2 | |
| Degree of protection | EN 60529 | |
| Shock and impact resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 | |
| Ambient conditions | ||
| Ambient temperature | -35 ... 50 °C (-31 ... 122 °F) Mount, connect, and configure only between 0° ... 50° | |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Relative humidity | 90 % , noncondensing | |
| Shock resistance | 30G ; 11 ms ; 3 impacts on each axis | |
| Vibration resistance | 1.5 mm ; 10 ... 55 Hz ; 2 hours on each axis | |
| Mechanical specifications | ||
| Degree of protection | IP40 | |
| Connection | 25-pin Sub-D socket for Barcode scanner , M16 cable gland for system connection (5x) , 9-pin Sub-D socket for PROFIBUS interface |
|
| Material | ||
| Housing | PC (Polycarbonate) | |
| Mass | 780 g | |
| Dimensions | ||
| Height | 71 mm | |
| Width | 192 mm | |
| Depth | 180 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280192 |
| ECLASS 12.0 | 27280192 |
| ECLASS 11.0 | 27280192 |
| ECLASS 10.0.1 | 27280192 |
| ECLASS 9.0 | 27280192 |
| ECLASS 8.0 | 27319290 |
| ECLASS 5.1 | 27310290 |
| ETIM 9.0 | EC003015 |
| ETIM 8.0 | EC003015 |
| ETIM 7.0 | EC003015 |
| ETIM 6.0 | EC003015 |
| ETIM 5.0 | EC003015 |
| UNSPSC 12.1 | 43211711 |
Details: CBX500-KIT-B6
Function
Devices from the CBX* series enable RS232- and RS485-compatible devices to be connected quickly and easily. A wide variety of connections also allows other field devices to be connected.
By reducing installation time and the number of system failures when a device is replaced, your operating costs will be significantly lower.
Standardized pinning of connections and simple attachment of cable ends using spring terminals ensures easy cable installation. The configuration of the connected scanner can be saved in backup modules and restored at a later date.
To facilitate installation of the device, the continuous mounting holes are easy to access and the top section of housing can be removed.
Note: Avoid mechanical stress, such as screwing the housing cover together, in deep-freeze areas.
Product Documentation: CBX500-KIT-B6
| Manuals | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Manual BM100 Backup module | ENG | 501 KB | |
| Manual CBX500 | ENG | 3149 KB | |
| Manual DAD Driver | ENG | 604 KB | |
| Manual Host Interface Modules | ENG | 1556 KB |
Design / Simulation: CBX500-KIT-B6
| CAD | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 768 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: CBX500-KIT-B6
| Declaration of Conformity | Nr. certyfikatu | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3633A | ALL | 213 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6630 | ALL | 36 KB |
Software: CBX500-KIT-B6
| Device Description Files/Drivers | Informacja o wersji | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| GSD file for Interface box / GSD-File für Anschaltbox | V 1.1 | ZIP | 14 KB |
| Software Tools | |||
| Genius Software / Genius Software | V. 1.16 | ZIP | 95060 KB |
Produkty powiązane: CBX500-KIT-B6
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Od czytników kodów 2D i urządzeń ręcznych po skanery kodów kreskowych i rozwiązania specjalne — znajdź najlepsze rozwiązanie do identyfikacji optycznej dla danego zastosowania.
Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
+48 22 256 9770
Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.