Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne
PXV100AQ-F200-R4-V19
| Opis produktu |
| Read head for use with the safe evaluation unit PUS-* (series) |
| General specifications |
| Passage speed | ≤ 10 m/s |
| Measuring length | max. 100000 m |
| Light type | Integrated LED lightning (red/blue) |
| Latency | 20 ms ±0.6 |
| Close time | 70 µs (During this time a change of the color specification is delayed) |
| Read distance | 100 mm |
| Depth of focus | ± 30 mm |
| Field of view | 120 mm x 77 mm |
| Ambient light limit | 30000 Lux |
| Resolution | |
| Non safety-related X | ± 1 mm |
| Safety-related X | ± 1 cm |
| Accuracy | |
| Non safety-related X | ± 0.2 mm |
| Safety-related X | See the original instructions |
| Measuring frequency | 40 Hz |
| Nominal ratings |
| Camera | |
| Type | CMOS , Global shutter |
| Processor | |
| Clock pulse frequency | 600 MHz |
| Speed of computation | 4800 MIPS |
| Digital resolution | 32 Bit |
| Time delay before availability | 6 s |
| Functional safety related parameters |
| MTTFd | 96 a |
| Mission Time (TM) | 10 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| LED indication | 7 LEDs (communication, alignment aid, status information) |
| Electrical specifications |
| Operating voltage | 14.5 ... 30 V DC , PELV (with unloaded switching outputs) |
| No-load supply current | max. 200 mA |
| Power consumption | 3 W
max: 3.7 W |
| Interface |
| Interface type | RS 485 interface |
| Data output code | binary code |
| Transfer rate | 115200 Bit/s |
| Termination | 120 Ω, switchable |
| Query cycle time | ≥ 7 ms |
| Input |
| Input type | Input 1: enable blue (active high)
Input 2: enable red (active high)
Input 3: color change (low:red, high: blue) |
| Level | Low: 0 V… 8 V
High: 10 V … +Vb |
| Input resistance | 32 kΩ |
| Input capacity | 500 pF |
| Output |
| Output type | 1 switch output PNP , PNP , programmable , short-circuit protected |
| Switching voltage | Operating voltage |
| Switching current | 150 mA each output |
| Standard conformity |
| Emitted interference | EN 61000-6-4:2007+A1:2011 |
| Noise immunity | EN 61000-6-2:2005 |
| Shock resistance | EN 60068-2-27:2009 |
| Vibration resistance | EN 60068-2-6:2008 |
| Approvals and certificates |
| CE conformity | CE |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Operating temperature | 0 ... 60 °C (32 ... 140 °F) , -20 ... 60 °C (-4 ... 140 °F) (noncondensing; prevent icing on the lens!) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Relative humidity | 90 % , noncondensing |
| Mechanical specifications |
| Connection type | 8-pin, M12 x 1 connector |
| Degree of protection | IP67 |
| Material | |
| Housing | PC/ABS |
| Mass | approx. 160 g |
| Dimensions | |
| Height | 70 mm |
| Width | 70 mm |
| Depth | 50 mm |
| General information |
| Note | 0° orientation to the DataMatrix code tape |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270918 |
| ECLASS 12.0 | 27270918 |
| ECLASS 11.0 | 27270701 |
| ECLASS 10.0.1 | 27270701 |
| ECLASS 9.0 | 27270701 |
| ECLASS 8.0 | 27270701 |
| ECLASS 5.1 | 27270701 |
| ETIM 9.0 | EC004672 |
| ETIM 8.0 | EC002999 |
| ETIM 7.0 | EC002999 |
| ETIM 6.0 | EC002999 |
| ETIM 5.0 | EC001852 |
| UNSPSC 12.1 | 43211711 |
Details:
PXV100AQ-F200-R4-V19
Product Documentation:
PXV100AQ-F200-R4-V19
| Manuals | Język | Typ pliku | Rozmiar pliku |
| Manual | ENG | PDF | 7238 KB
|
Design / Simulation:
PXV100AQ-F200-R4-V19
Approvals:
PXV100AQ-F200-R4-V19
Produkty powiązane:
PXV100AQ-F200-R4-V19
| Matching System Components |
|
|
|
| Data Matrix code tape, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa |
|
|
|
|
| DataMatrix metal code bars for positioning safePXV and safePGV read heads, High temperature resistance, High mechanical stability, Easily exchangeable, Chemically highly resistant, 2-colored Data Matrix codesfa |
|
| Accessories |
|
|
|
| Female connector M12 straight A-coded 8-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa |
|
|
|
|
| Alignment guide for readerfa |
|
|
|
|
| Female connector, M12, 8-pin, shielded, field attachablefa |
|
|
|
|
| Grounding clip for PCV system, Stainless steel version, Low weight, M12 plug connection, High mechanical stabilityfa |
|
|
|
|
| Marker head for 25 mm code tape, For 25 mm code tapes, Can be used for PCV80..., PCV100..., and PCV130... readers, Includes 2 x edding® 3000 permanent markersfa |
|
|
|
|
| Mounting bracket for PCV* read headfa |
|
|
|
|
| Cordset M12 socket straight to M12 plug straight A-coded, 8-pin, PUR cable black, shielded, UL-approved, drag chain suitablefa |
|
Potrzebujesz pilnie pomocy?
+48 22 256 9770