Barcode scanner VB14N-400-T
- Line scanner
- Version for low temperature applications
- Simple operation via function keys: test mode, code teaching and code optimization
- Code reconstructor
- Connect up to 32 scanners
- Sturdy aluminum housing
- Two serial interfaces RS 232 / RS 485
- Engine control (On/Off) possible
- Degree of protection IP65
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne VB14N-400-T
| Opis produktu |
|---|
| Barcode scanner |
| General specifications | ||
|---|---|---|
| Light source | laser diode | |
| Light type | modulated visible red light | |
| Laser nominal ratings | ||
| Note | LASER LIGHT , DO NOT STARE INTO BEAM | |
| Laser class | 2 | |
| Wave length | 650 nm | |
| Beam divergence | < 1.5 mrad | |
| Pulse length | 1.3 ms | |
| Repetition rate | 200 Hz | |
| max. pulse energy | 1.19 µJ | |
| Scan rate | 600 ... 1000 s-1 | |
| Read distance | 60 ... 400 mm | |
| Opening angle | 50 ° | |
| Optical face | front or on side (with deviation mirror) | |
| Resolution | 0.2 mm ( 8 mils ) | |
| Indicators/operating means | ||
| Operation indicator | LED blue: Power on, LED green: Ready to read (READY), LED green: Read successfully (GOOD), LED yellow: External trigger signal pending (TRIGGER), LED yellow: Communication active (COM), LED red: "no read" (STATUS) | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Power consumption | max. 3 W | |
| Interface | ||
| Interface type | serial , RS-232 and RS-485 up to 115.2 kBit/s ID-NET™ up to 1 Mbit/s |
|
| Input 1 | ||
| Input type | External triggering | |
| Output | ||
| Signal output | 2, programmable, optocoupled | |
| Switching voltage | max. 40 V DC | |
| Switching current | max. 40 mA | |
| Voltage drop | 1 V at load current ≤ 10 mA | |
| Compliance with standards and directives | ||
| Directive conformity | EMC Directive 2004/108/EC | |
| Standard conformity | ||
| Noise immunity | EN 61000-6-2:2005 | |
| Emitted interference | EN 55022 | |
| Degree of protection | EN 60529 | |
| Laser class | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 | |
| Ambient conditions | ||
| Ambient temperature | -35 ... 45 °C (-31 ... 113 °F) | |
| Storage temperature | -35 ... 70 °C (-31 ... 158 °F) | |
| Relative humidity | 90 % , noncondensing | |
| Shock resistance | IEC 68-2-27 Test EA 30G; 11 ms; 3 impacts on each axis | |
| Vibration resistance | IEC 68-2-6 Test FC 1.5 mm ; 10 ... 55 Hz ; 2 hours on each axis | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Connection | 1 m cable with 25-pin Sub-D connector | |
| Material | ||
| Housing | Aluminum | |
| Mass | 330 g | |
| Dimensions | ||
| Height | 34 mm | |
| Width | 68 mm | |
| Depth | 84 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280102 |
| ECLASS 12.0 | 27280102 |
| ECLASS 11.0 | 27280102 |
| ECLASS 10.0.1 | 27280102 |
| ECLASS 9.0 | 27280102 |
| ECLASS 8.0 | 27280102 |
| ECLASS 5.1 | 27280102 |
| ETIM 9.0 | EC002999 |
| ETIM 8.0 | EC002999 |
| ETIM 7.0 | EC002999 |
| ETIM 6.0 | EC002999 |
| ETIM 5.0 | EC002999 |
| UNSPSC 12.1 | 43211701 |
Details: VB14N-400-T
Function
The VB14N-***-T-R is a grid scanner for reading 1D barcodes and is specially designed for use at low temperatures. With its high-performance optics and code reconstruction, the barcode scanner offers a high level of reliability when reading 1D barcodes that are difficult to detect. A function key and several LEDs on the barcode scanner provide support when parameterizing, teaching in barcodes, and testing. In live operation, the LEDs provide information about the relevant read status.
You can establish a high-speed connection between up to 32 devices. This connection enables data to be recorded in a quicker and more efficient manner, without the need for an additional external multiplexer.
The corresponding PC software makes parameterization simple.
Informative Literature: VB14N-400-T
| Literature | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Application Report - A scanner for any situation - VB14N | ENG | 165 KB | |
| Application Report - Automatic Coordination in Warehouses | ENG | 414 KB |
Product Documentation: VB14N-400-T
| Manuals | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Manual Barcode scanner VB14N | ENG | 2806 KB |
Design / Simulation: VB14N-400-T
| CAD | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 230 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: VB14N-400-T
| Declaration of Conformity | Nr. certyfikatu | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3633A | ALL | 213 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6630 | ALL | 36 KB |
Software: VB14N-400-T
| Software Tools | Informacja o wersji | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Genius Software / Genius Software | V. 1.16 | ZIP | 95060 KB |
Produkty powiązane: VB14N-400-T
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Od czytników kodów 2D i urządzeń ręcznych po skanery kodów kreskowych i rozwiązania specjalne — znajdź najlepsze rozwiązanie do identyfikacji optycznej dla danego zastosowania.
Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
+48 22 256 9770
Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.