Retroreflective sensor OBR17M-R202-K2
- Version for universal voltages
- Medium design with versatile mounting options
- Degree of protection IP67
- Mounting on full metal sockets
- Very bright, highly visible light spot
- Highly visible LEDs for Power ON and switching state
- Easy to use
- Image is generic for this device type and may deviate from the specific variant
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Faça o download das folhas de dados em PDF:
Folhas de dados: Dados técnicos do OBR17M-R202-K2
| General specifications | ||
|---|---|---|
| Effective detection range | 0 ... 17 m | |
| Reflector distance | 0.02 ... 17 m | |
| Threshold detection range | 20 m | |
| Reference target | H85-2 reflector | |
| Light source | LED | |
| Light type | modulated visible red light | |
| LED risk group labelling | exempt group | |
| Polarization filter | yes | |
| Diameter of the light spot | approx. 500 mm at a distance of 17 m | |
| Opening angle | 2 ° | |
| Ambient light limit | EN 60947-5-2 : 60000 Lux | |
| Functional safety related parameters | ||
| MTTFd | 642 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green: power on | |
| Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve Flashing (8 Hz) - fault detected, the outputs maintain the status |
|
| Control elements | Light-on/dark-on changeover switch | |
| Control elements | sensitivity adjustment | |
| Electrical specifications | ||
| Operating voltage | 24 ... 240 V AC/DC | |
| No-load supply current | < 30 mA at 24 V Operating voltage | |
| Protection class | II | |
| Rated insulation voltage | 250 V | |
| Rated impulse withstand voltage | 2500 V | |
| Power consumption | ≤ 3.5 VA | |
| Fuse | Safety fuse ≤ 2 A (slow-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |
|
| Output | ||
| Switching type | The switching type of the sensor is adjustable. The default setting is: Q - BK: normally-open / dark-on /Q - GY: normally-closed / light-on C - WH: Common |
|
| Signal output | Relay, 1 alternator | |
| Switching voltage | max. 240 V AC/DC | |
| Switching current | max. 2.5 A , see section characteristic curve | |
| Switching power | DC: max. 95 W AC: max. 600 VA | |
| Usage category | DC-12 , DC-13 , AC-12 u. AC-140 | |
| Switching frequency | 25 Hz | |
| Response time | ≤ 20 ms | |
| Conformity | ||
| Product standard | EN 60947-5-2 , EN 60947-1 | |
| Approvals and certificates | ||
| UL approval | E87056 , cULus Listed | |
| Ambient conditions | ||
| Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) , cable, fixed installation -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains |
|
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Pollution degree | 3 | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | 2 m fixed cable | |
| Material | ||
| Housing | PC (Polycarbonate) | |
| Optical face | PMMA | |
| Mass | approx. 120 g | |
| Dimensions | ||
| Height | 62 mm | |
| Width | 20 mm | |
| Depth | 42 mm | |
| Cable length | 2 m | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270902 |
| ECLASS 12.0 | 27270902 |
| ECLASS 11.0 | 27270902 |
| ECLASS 10.0.1 | 27270902 |
| ECLASS 9.0 | 27270902 |
| ECLASS 8.0 | 27270902 |
| ECLASS 5.1 | 27270902 |
| ETIM 9.0 | EC002717 |
| ETIM 8.0 | EC002717 |
| ETIM 7.0 | EC002717 |
| ETIM 6.0 | EC002717 |
| ETIM 5.0 | EC002717 |
| UNSPSC 12.1 | 39121528 |
Details: OBR17M-R202-K2
Informative Literature: OBR17M-R202-K2
| Literature | Idioma | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|---|
| Application Report - Reliable Detecting Foil Tears in Battery Cell Manufacturing | ENG | 163 KB |
Design / Simulation: OBR17M-R202-K2
| CAD | Idioma | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1014 KB |
Approvals: OBR17M-R202-K2
| Certificates | Número do Certificado | Idioma | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|---|---|
| /cert/cert7189.pdf | E87056, Vol. 1, Sec. 62 | ALL | 531 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) | TDOC-7384_POR | POR | 221 KB | |
| UK Declaration of Conformity (P+F) | TDOC-7385_ENG | ENG | 196 KB | |
Produtos Relacionados: OBR17M-R202-K2
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Pela primeira vez, estão disponíveis soluções consistentes dos princípios fotoelétricos funcionais e tecnologias inovadoras em estruturas idênticas. Os usuários se beneficiam de um conceito operacional uniforme em todo o portfólio. Confira as séries R100, R101, R103, R200 e R201...
Seja vidro, wafers solares ou placas de circuito impresso: Os sensores fotoelétricos da série ML100 são precisamente adaptados para atender aos requisitos de várias tarefas complexas de detecção. Saiba mais sobre o portfólio ...
Pepperl+Fuchs Ltda.
Rua José Versolato, 111
Domo Corporate Tower, Conjunto 144
09750-730 São Bernardo do Campo, SP
Brasil
vendas@br.pepperl-fuchs.com
+55 11 4007 1448
A Pepperl+Fuchs é líder na fabricação e no desenvolvimento de sensores e componentes eletrônicos para o setor global da automação industrial. Inovação contínua, qualidade e crescimento constante garantem o nosso sucesso há mais de 70 anos. Empregamos mais de 6.300 colaboradores em todo o mundo e contamos com fábricas próprias na Alemanha, Estados Unidos, Cingapura, Hungria, Indonésia e Vietnã, todas com certificação ISO 9001.