Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Faça o download das folhas de dados em PDF:
Folhas de dados: Dados técnicos do
GLV18-55-G/115/120
| Descrição do Produto |
| Retroreflective sensor for glass detection, M18 threaded housing design, plastic housing, front optical face, 2.5 m detection range, red light, light/dark on, DC version, 2 PNP outputs, fixed cable |
| General specifications |
| Effective detection range | 0 ... 2.5 m in glass mode;
0 ... 5 m in normal mode |
| Reflector distance | 0 ... 2.5 m in glass mode;
0 ... 5 m in normal mode |
| Threshold detection range | 6.5 m |
| Reference target | reflector C110-2 |
| Light source | LED |
| Light type | modulated visible red light , 640 nm |
| Polarization filter | yes |
| Diameter of the light spot | approx. 370 mm at 6.5 m ; 50 mm at 1 m |
| Opening angle | approx. 2 ° |
| Optical face | frontal |
| Ambient light limit | 30000 Lux |
| Functional safety related parameters |
| MTTFd | 1260 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green, statically lit Power on,
blinking with 2 Hz or 4 Hz in Teach-In mode |
| Function indicator | LED yellow: In retro-reflective mode: Lights up when light beam is free; flashing if signal is short of function reserve, off when light beam is interrupted In glass-mode: Lights up when light beam is free; flashing if further compensation is impossible; off when light beam is interrupted |
| Control elements | potentiometer for Teach-In and Mode selection |
| Contrast detection levels | 18 % - clear glass bottles
|
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| No-load supply current | < 15 mA |
| Output |
| Switching type | light/dark on |
| Signal output | 2 PNP, complementary, short-circuit protected, open collectors |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA |
| Voltage drop | ≤ 1.5 V DC |
| Switching frequency | 1 kHz |
| Response time | ≤ 0.5 ms |
| Conformity |
| Product standard | EN 60947-5-2 |
| Approvals and certificates |
| EAC conformity | TR CU 020/2011 |
| Protection class | II, Rated insulation voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1 |
| UL approval | cULus Listed, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 2 m fixed cable |
| Material | |
| Housing | PC |
| Optical face | PMMA |
| Cable | PVC |
| Mass | approx. 75 g |
| Dimensions | |
| Length | 39.8 mm |
| Diameter | 18 mm |
| Thread size | M18 |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270902 |
| ECLASS 12.0 | 27270902 |
| ECLASS 11.0 | 27270902 |
| ECLASS 10.0.1 | 27270902 |
| ECLASS 9.0 | 27270902 |
| ECLASS 8.0 | 27270902 |
| ECLASS 5.1 | 27270902 |
| ETIM 9.0 | EC002717 |
| ETIM 8.0 | EC002717 |
| ETIM 7.0 | EC002717 |
| ETIM 6.0 | EC002717 |
| ETIM 5.0 | EC002717 |
| UNSPSC 12.1 | 39121528 |
Details:
GLV18-55-G/115/120
Product Documentation:
GLV18-55-G/115/120
Design / Simulation:
GLV18-55-G/115/120
Approvals:
GLV18-55-G/115/120
Produtos Relacionados:
GLV18-55-G/115/120
| Accessories |
|
|
|
| Mounting flange, 18 mm, Retainer for all cylindrical sensors with M18 thread, Simple installation and exact setting, Large sensing range (max. 20 mm)fa |
|
|
|
|
| Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa |
|
|
|
|
| Mounting Bracket with swivel nutfa |
|
|
|
|
| Plastic mounting adapter, 18 mmfa |
|
|
|
|
| Reflector, round ø 84 mm, central mounting holefa |
|
|
|
|
| Reflector, rectangular 40.3 mm x 59.9 mm, mounting holesfa |
|
|
|
|
| Reflector, rectangular 51 mm x 61 mm, mounting holes, fixing strapfa |
|
+55 11 4007 1448