Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Faça o download das folhas de dados em PDF:
Folhas de dados: Dados técnicos do
OBR50M-R300-2P1-V1
Descrição do Produto |
Retroreflective sensor |
General specifications |
Effective detection range | 0 ... 50 m |
Reflector distance | 0.2 ... 50 m |
Reference target | 3 x REF-H100 |
Light source | LED |
Light type | modulated visible red light |
LED risk group labelling | exempt group |
Angle deviation | max. ± 2° |
Measuring method | Pulse Ranging Technology (PRT) |
Diameter of the light spot | approx. 16 cm x 18 cm at a distance of 10 m |
Ambient light limit | 50000 Lux |
Window width | 100 mm |
Functional safety related parameters |
MTTFd | 100 a |
Mission Time (TM) | 10 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Operation indicator | LED green |
Function indicator | 2 LEDs yellow for switching state |
Control elements | Teach-In key |
Electrical specifications |
Operating voltage | 10 ... 30 V DC |
Ripple | 10 % within the supply tolerance |
No-load supply current | ≤ 80 mA / 24 V DC |
Time delay before availability | < 0.7 s , for temperatures <-30°C compliance of the specification 5 mins after power on |
Output |
Switching type | Q - Pin4: NPN normally closed / light-on, PNP normally open / dark-on /Q - Pin2: NPN normally open / dark-on, PNP normally closed / light-on |
Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected |
Switching voltage | max. 30 V DC |
Switching current | max. 100 mA |
Switching frequency | 50 Hz |
Response time | 5 ms |
Conformity |
Product standard | EN 60947-5-2 |
Approvals and certificates |
UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
Ambient conditions |
Ambient temperature | -40 ... 55 °C (-40 ... 131 °F) |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Connection | 4-pin, M12 x 1 connector |
Material | |
| Housing | Plastic ABS |
| Optical face | PMMA |
Mass | 90 g |
Dimensions | |
| Height | 88 mm |
| Width | 25.8 mm |
| Depth | 54.3 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27270902 |
ECLASS 12.0 | 27270902 |
ECLASS 11.0 | 27270902 |
ECLASS 10.0.1 | 27270902 |
ECLASS 9.0 | 27270902 |
ECLASS 8.0 | 27270902 |
ECLASS 5.1 | 27270902 |
ETIM 9.0 | EC002717 |
ETIM 8.0 | EC002717 |
ETIM 7.0 | EC002717 |
ETIM 6.0 | EC002717 |
ETIM 5.0 | EC002717 |
UNSPSC 12.1 | 39121528 |
Details:
OBR50M-R300-2P1-V1
Product Documentation:
OBR50M-R300-2P1-V1
Design / Simulation:
OBR50M-R300-2P1-V1
Approvals:
OBR50M-R300-2P1-V1
Produtos Relacionados:
OBR50M-R300-2P1-V1
Accessories |
|
|
|
Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa |
|
|
|
|
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa |
|
|
|
|
Mounting bracket: mounting aid for sensors in the RL* seriesfa |
|
|
|
|
Mounting aid for RL* seriesfa |
|
|
|
|
Metal enclosure for inserting protective panes or aperturesfa |
|
|
|
|
Mounting and fine adjustment device for sensors from the 28 seriesfa |
|
|
|
|
Mounting bracket for rear wall mountingfa |
|
|
|
|
dove tail mounting clampfa |
|
|
|
|
dove tail mounting clampfa |
|