Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Faça o download das folhas de dados em PDF:
Folhas de dados: Dados técnicos do
VAA-2EA-G1-ZE/P-S
Descrição do Produto |
Pneumatic module 2 inputs/2 pneumatic outputs |
General specifications |
Node type | Standard node |
Indicators/operating means |
LED AS-i | AS-Interface voltage; LED green |
LED IN | switching state (input); 2 LED yellow |
LED OUT | Switching state (output); 2 LED yellow |
Electrical specifications |
Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
Rated operating current | ≤ 45 mA (without sensors) |
Input |
Number/Type | 2 inputs for 2- or 3-wire sensors (PNP), DC |
Supply | from AS-Interface |
Current loading capacity | ≤ 100 mA, short-circuit protected |
Switching point | OFF: ≤ 1.5 mA ON: ≥ 5 mA, ≥ 10 V |
Output |
Number/Type | 2 pneumatic outputs with separated 3/2-way valves |
Pneumatic output |
Venting guide | Sinter filter |
Compressed air | 2 ... 8 bar, filtered (5 µm), oiled or unoiled compressed air |
Air throughput | 400 l/min |
Valve cross-section | 5 mm |
Directive conformity |
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 62026-2:2013 |
Standard conformity |
Degree of protection | EN 60529:2000 |
AS-Interface | EN 62026-2:2013 |
Programming instructions |
Profile | S-3.F |
IO code | 3 |
ID code | F |
ID1 code | F |
ID2 code | F |
Data bits (function via AS-Interface) | InputOutput |
| D0 | IN1 - |
| D1 | IN2 - |
| D2 | - OUT3 |
| D3 | - OUT4 |
Parameter bits (programmable via AS-i) | function |
| P0 | not used |
| P1 | not used |
| P2 | not used |
| P3 | not used |
Ambient conditions |
Ambient temperature | 0 ... 55 °C (32 ... 131 °F) |
Storage temperature | -20 ... 55 °C (-4 ... 131 °F) |
Mechanical specifications |
Degree of protection | IP65 according to EN 60529 |
Connection | cable piercing methos or terminals flat cable or standard round cable inputs: M12 x 1 quick disconnect outputs: plug-in hose connector (8 mm) |
Mass | approx. 200 g |
Dimensions | |
| Height | 60 mm |
| Width | 45 mm |
| Length | 102 mm |
Mounting | DIN rail or screw mounting |
Classifications
System | Classcode |
ECLASS 13.0 | 27242604 |
ECLASS 12.0 | 27242604 |
ECLASS 11.0 | 27242604 |
ECLASS 10.0.1 | 27242604 |
ECLASS 9.0 | 27242604 |
ECLASS 8.0 | 27242604 |
ECLASS 5.1 | 27242604 |
ETIM 9.0 | EC001599 |
ETIM 8.0 | EC001599 |
ETIM 7.0 | EC001599 |
ETIM 6.0 | EC001599 |
ETIM 5.0 | EC001599 |
UNSPSC 12.1 | 39121535 |
Details:
VAA-2EA-G1-ZE/P-S
Product Documentation:
VAA-2EA-G1-ZE/P-S
Design / Simulation:
VAA-2EA-G1-ZE/P-S
Approvals:
VAA-2EA-G1-ZE/P-S
Produtos Relacionados:
VAA-2EA-G1-ZE/P-S
Matching System Components |
|
|
|
AS-Interface module mounting base with adressing jack for connection to flat cable (AS-Interface)fa |
|
|
|
|
AS-Interface module mounting base for connection to flat cable (AS-Interface)fa |
|
Accessories |
|
|
|
AS-Interface Handheld with accessoryfa |
|