Radar sensor RMS-D-RC-NA1
- Microwave motion sensor with intelligent functions
- Cross traffic suppression
- Simplest adjustment of the sensing range
- Direction detection
- Programmable by remote control
- Reliable detection of people and vehicles
- "Slow motion" for extremely slow motions
- Version with FCC-frequency
- IC approval
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Stáhněte si kompletní katalogový list ve formátu PDF:
Výňatek z katalogového listu: Technická data RMS-D-RC-NA1
| Popis produktu |
|---|
| FCC-approved premium radar motion sensor offering additional functions, dynamic version offering direction detection, remote controllable, 2 m x 4.5 m detection range, max. installation height: 4 m, black housing, relay contact output, cable connection |
| General specifications | ||
|---|---|---|
| Sensing range | Wide: 2000 x 4500 mm (DxW) at 2200 mm mounting height and 30° inclination angle narrow: 4500x 2000 mm (DxW) at 2200 mm mounting height and 30° inclination angle |
|
| Function principle | Microwave module | |
| Detection speed | min. 0.1 m/s | |
| Setting angle | Horizontal: -30° ... +30° in 5° increments Vertical: 0° ... 90° in 10° increments |
|
| Operating frequency | 24.075 ... 24.175 GHz K-Band | |
| Operating mode | Radar motion sensor | |
| Transmitter radiated power (EIRP) | < 20 dBm | |
| Functional safety related parameters | ||
| MTTFd | 640 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Function indicator | LED red/green | |
| Control elements | DIP switch for selection of operating modes : direction detection , cross-traffic suppression , Slow-motion , Switching type | |
| Control elements | sensitivity adjustment | |
| Control elements | Adjustment for off delay | |
| Electrical specifications | ||
| Operating voltage | 12 ... 36 V DC , 12 ... 28 V AC | |
| No-load supply current | ≤ 50 mA at 24 V DC | |
| Power consumption | ≤ 1.2 W at 24 V DC ≤ 1.7 W at 36 V DC |
|
| Output | ||
| Switching type | NO/NC | |
| Signal output | Relay, 1 NO contact/NC contact | |
| Switching voltage | max. 48 V AC / 48 V DC | |
| Switching current | max. 0.5 A AC / 1 A DC | |
| Switching power | max. 24 W / 60 VA | |
| De-energized delay | 0.2 ... 5 s adjustable (1 sec factory setting) | |
| Approvals and certificates | ||
| FCC approval | FCC Rules part 15 / This device can be used in the USA. | |
| IC approval | RSS210 Issue 8.0 / This device can be used in Canada. | |
| Approvals | Use in countries within the European Union is not permitted. In other countries, all applicable national regulations must be observed. | |
| Ambient conditions | ||
| Operating temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Relative humidity | max. 90 % non-condensing | |
| Mechanical specifications | ||
| Mounting height | max. 4000 mm | |
| Degree of protection | IP54 | |
| Connection | plug 4-pin , 5 m connecting cable included with delivery | |
| Material | ||
| Housing | PC/ABS black | |
| Mass | 120 g | |
| Dimensions | 123 mm x 65 mm x 57 mm | |
| Height | 65 mm | |
| Width | 123 mm | |
| Depth | 57 mm | |
| Suitable series | ||
| Series | RMS | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274501 |
| ECLASS 12.0 | 27280890 |
| ECLASS 11.0 | 27280890 |
| ECLASS 10.0.1 | 27280890 |
| ECLASS 9.0 | 27280890 |
| ECLASS 8.0 | 27280890 |
| ECLASS 5.1 | 27270990 |
| ETIM 9.0 | EC004807 |
| ETIM 8.0 | EC000138 |
| ETIM 7.0 | EC000138 |
| ETIM 6.0 | EC000138 |
| ETIM 5.0 | EC000138 |
| UNSPSC 12.1 | 39121528 |
Details: RMS-D-RC-NA1
Design / Simulation: RMS-D-RC-NA1
| CAD | Jazyk | Typ souboru | Velikost souboru |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 3730 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Související produkty: RMS-D-RC-NA1
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Pepperl+Fuchs s.r.o.
Pod Vodárenskou věží 4
18208 Praha 8
Czech Republic
info@cz.pepperl-fuchs.com
+420 225 989 180
© 2024 Všechna práva vyhrazena
Pepperl+Fuchs je přední vývojář a výrobce průmyslových senzorů a komponentů pro světový trh automatizace. Neustálé inovace, trvalé kvalitní a stálý růst zaručuje mnoho úspěchů přes více než 70 let. Pepperl+Fuchs zaměstnává 6300 lidí po celém světě a má výrobní závody v Německu, USA, Singapuru, Maďarsku, Indonésii a Vietnamu, které podléhají ISO 9001.