Servisní linka pro průmyslové snímače
Servisní linka ochrany před výbuchem

Incremental rotary encoder ENI90HO-R

ENI90HO-R
  • Housing ∅ 93 mm
  • Up to 5000 pulses
  • Universal output driver
  • BlueBeam technology for ultimate precision
  • Resistant to salt water
  • Recessed hollow shaft

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Stáhněte si kompletní katalogový list ve formátu PDF:


Výňatek z katalogového listu: Technická data   ENI90HO-R

General specifications
Detection typephotoelectric sampling
Linearity error± 0.025 °
Pulse countmax. 5000
Functional safety related parameters
MTTFd435 a
Mission Time (TM)10 a
Diagnostic Coverage (DC)0 %
Electrical specifications
Operating voltage4.75 ... 30 V DC
No-load supply currentmax. 50 mA
Output
Output typepush-pull or RS422 (universal output driver, output level depending on input voltage)
Load currentmax. per channel 40 mA , short-circuit protected, reverse polarity protected
Output frequencymax. 400 kHz
Rise time300 ns
Phase position A to B
Pulse counts < 360090 ° ± 9 ° electrical
Pulse counts ≥ 360090 ° ± 25 ° electrical
Duty cycle1/2 ± 10 %
Connection
ConnectorM12 connector, 8-pin
M12 connector, 5 pin
M23 connector, 12-pin , clockwise rotation
M23 connector, 12-pin , counter clockwise rotation
Cable∅6 mm, 4 x 2 x 0.14 mm2
Terminal compartmentCable duct for cable diameter ∅4.0 mm ... 9.5 mm
Standard conformity
Degree of protectionDIN EN 60529, IP65, IP66, IP67
Climatic testingDIN EN 60068-2-78 , no moisture condensation
Salt spray testDIN EN 60068-2-52 , 672 h
Emitted interferenceEN IEC 61000-6-4:2019
Noise immunityEN IEC 61000-6-2:2019
Shock resistanceDIN EN 60068-2-27, 200 g, 6 ms
Vibration resistanceDIN EN 60068-2-6, 20 g, 10 ... 2000 Hz
Approvals and certificates
UL approvalE223176 , cULus Listed, General Purpose, Class 2 Power Source, Type 1 enclosure , if UL marking is marked on the product. For use in NFPA 79 Applications only. adapters providing field wiring on request
Maximum permissible ambient temperaturemax. 80 °C (max. 176 °F)
Ambient conditions
Operating temperature-40 ... 85 °C (-40 ... 185 °F) , cable, fixed installation
-5 ... 85 °C (23 ... 185 °F) , movable cable
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Material
Housingpowder coated aluminum
Flangealuminium, salt water resitant
ShaftStainless steel 1.4305 / AISI 303
Mass< 1100 g without cable
Rotational speedmax. 3000 min -1 for IP66/IP67
Starting torque≤ 0.25 Nm for IP66/IP67
Shaft insulationmax. 2.5 kV (for dielectric strength version)
Shaft load
Axial≤ 100 N
Radial≤ 300 N
Dimensions
Length84.5 mm
Diameter93 mm

Classifications

SystemClasscode
ECLASS 13.027270501
ECLASS 12.027270501
ECLASS 11.027270501
ECLASS 10.0.127270501
ECLASS 9.027270501
ECLASS 8.027270501
ECLASS 5.127270501
ETIM 9.0EC001486
ETIM 8.0EC001486
ETIM 7.0EC001486
ETIM 6.0EC001486
ETIM 5.0EC001486
UNSPSC 12.139121527

Details: ENI90HO-R

Product Documentation: ENI90HO-R

Výběr jazyka:
Brief InstructionsJazykTyp souboruVelikost souboru
Instruction leaflet / BeipackzettelALLPDF288 KB

Design / Simulation: ENI90HO-R

Výběr jazyka:
CADJazykTyp souboruVelikost souboru
CAD Portal / CAD PortalALLLINK---

Approvals: ENI90HO-R

Výběr jazyka:
CertificatesČíslo certifikátuJazykTyp souboruVelikost souboru
Canada, USA UL General PurposeCoC UL-US-L223176-11-02907102-1 / UL-CA-L223176-31-02907102-1ALLPDF546 KB

Související produkty: ENI90HO-R

Accessories
Support plate 70 mm, straightfa
Support plate 120 mm, straightfa
Support plate 120 mm, right anglefa
swivel arm, 70 mmfa
swivel arm, 120 mmfa
Mounting accessories for recessed hollow shaft 16 mmfa
Mountiong accessories for cone shaftfa
Dismounting set for ENI90HD rotary encoderfa
Grounding strap M4/M6fa
Gasket set for cable ductsfa
Female cordsetfa