Cable pull rotary encoder ECA10TL - SSI
- Solid yet lightweight plastic construction
- Compact, slim design (the shaft of the mounted rotary encoder is used to provide the function of the drum bearing)
- Coupling-free adaptation
- Wide range of mounting options
- Rust and acid-resistant measuring cable
- Very high level of linearity and repeatability
- SSI interface
- Free of wear magnetic sampling
- Additionally push buttons for preset function (only model characteristic SB2, SG2)
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Stáhněte si kompletní katalogový list ve formátu PDF:
Výňatek z katalogového listu: Technická data ECA10TL - SSI
| Popis produktu |
|---|
| Cable pull rotary encoder with SSI interface |
| General specifications | ||
|---|---|---|
| Detection type | magnetic sampling | |
| Device type | Target line with SSI interface | |
| Measuring length | 3000 ... 10000 mm | |
| Construction type | 80 mm, 130 mm, 190 mm | |
| Resolution | Cable pull: design 80 mm: with 13 Bit 0,028 mm; with 12 Bit 0,056 mm design 130 mm: with 13 Bit 0,047 mm; with 12 Bit 0,094 mm design 190 mm: with 13 Bit 0,068 mm; with 12 Bit 0,0135 mm Encoder: standard 25 Bit (13 Bit/revolution) or as an option 24 Bit (12 Bit/revolution) |
|
| Electrical specifications | ||
| Operating voltage | 4.75 ... 30 V DC | |
| No-load supply current | typ. 50 mA | |
| Power consumption | approx. 1.5 W | |
| Output code | Gray code, binary code | |
| Code course (counting direction) | adjustable | |
| Interface | ||
| Interface type | SSI | |
| Transfer rate | 0.1 ... 2 MBit/s | |
| Cycle time | < 100 µs | |
| Standard conformity | RS 422 | |
| Input 1 | ||
| Input type | Selection of counting direction (cw/ccw) | |
| Signal voltage | ||
| High | 4.75 V ... UB (cw descending) | |
| Low | 0 ... 2 V or unconnected (cw ascending) | |
| Input current | < 6 mA | |
| Input 2 | ||
| Input type | zero-set (PRESET 1) with falling edge | |
| Signal voltage | ||
| High | 4.75 V ... UB | |
| Signal duration | min. 1.1 s | |
| Connection | ||
| Connector | M12 connector, 8-pin or M23 connector, 12-pin | |
| Cable | ∅7 mm, 6 x 2 x 0.14 mm2 | |
| Standard conformity | ||
| Degree of protection | acc. DIN EN 60529 | |
| Connection side | cable models: IP65 connector models: IP65 Cable pull: IP50 |
|
| Climatic testing | DIN EN 60068-2-3, no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Ambient conditions | ||
| Ambient temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Operating temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Relative humidity | 98 % , no moisture condensation | |
| Mechanical specifications | ||
| Rope diameter | 0.55 mm | |
| Material | ||
| Housing | nickel-plated steel | |
| Cable pull | design 80/130 : Luranyl® or Lexan 920 design 190 : ABS-GF17 |
|
| Flange | Aluminum | |
| Rope | Stainless steel 1.4401/316 | |
| Life span | up to 106 Cycles | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270503 |
| ECLASS 12.0 | 27270502 |
| ECLASS 11.0 | 27270502 |
| ECLASS 10.0.1 | 27270502 |
| ECLASS 9.0 | 27270502 |
| ECLASS 8.0 | 27270502 |
| ECLASS 5.1 | 27270502 |
| ETIM 9.0 | EC001486 |
| ETIM 8.0 | EC001486 |
| ETIM 7.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| ETIM 5.0 | EC001486 |
| UNSPSC 12.1 | 39121527 |
Details: ECA10TL - SSI
Informative Literature: ECA10TL - SSI
| Literature | Jazyk | Typ souboru | Velikost souboru |
|---|---|---|---|
| Application Report - Linear Position Measurement for Pipe Handlers on Offshore Oil Rigs | ENG | 328 KB | |
| Application Report - Precise Heigh Measurement with Autonomous Forklifts | ENG | 191 KB |
Product Documentation: ECA10TL - SSI
| Brief Instructions | Jazyk | Typ souboru | Velikost souboru |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 5459 KB | |
| Manuals | |||
| Manual EC*SL*, Cable-Pull | ENG | 3917 KB | |
Approvals: ECA10TL - SSI
| Certificates | Číslo certifikátu | Jazyk | Typ souboru | Velikost souboru |
|---|---|---|---|---|
| US CA UL | CoC 20190913-E223176 RptRef E223176-20081013 | ALL | 280 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0924C | ALL | 323 KB | |
Pepperl+Fuchs s.r.o.
Pod Vodárenskou věží 4
18208 Praha 8
Czech Republic
info@cz.pepperl-fuchs.com
+420 225 989 180
© 2024 Všechna práva vyhrazena
Pepperl+Fuchs je přední vývojář a výrobce průmyslových senzorů a komponentů pro světový trh automatizace. Neustálé inovace, trvalé kvalitní a stálý růst zaručuje mnoho úspěchů přes více než 70 let. Pepperl+Fuchs zaměstnává 6300 lidí po celém světě a má výrobní závody v Německu, USA, Singapuru, Maďarsku, Indonésii a Vietnamu, které podléhají ISO 9001.