Línea de servicio de Sensores Industriales
Atención al cliente para protección contra explosiones

Wireless Access Point (Ex d) GUB3L.I.CP-Y*

GUB3L.I.CP-Y*
  • Aluminum alloy
  • Installation in Zone 1, Zone 2, Zone 21 and Zone 22
  • Ex d and Ex tb certified
  • Gas group IIC
  • Use of industrial Wireless Access Points in hazardous areas
  • External antennas for best possible signal dispersion
  • Customizable configuration of WI-FI and network devices and cable entries as per specification
  • Image and drawing are generic for this device type and may deviate from the specific variant

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Descargue la hoja de datos completa en PDF:


Extracto de la hoja de datos: Información técnica del  GUB3L.I.CP-Y*

Descripción del producto
Wireless Access Point in aluminum alloy enclosure for use in explosion-hazardous areas
Electrical specifications
Operating voltage1500 V DC / 1000 V AC max.
Operating currentrecommended: 1600 A max.
Mechanical specifications
Thread typemetric ISO pitch 1.5 mm or NPT ANSI ASME B1.20.1
Enclosure coverthreaded round cover
Cover fixingflamepath thread
Cover sealnone, O-ring for IP66/67
Degree of protectionIP66 (IP66/IP67 with O-ring)
Material
Enclosurealuminum alloy
Finishepoxy coated RAL 7005 (grey)
O-Ringsilicone
Mass21 kg
Dimensions360 mm x 360 mm x 219 mm
values might differ slightly due to casting and manufacturing tolerances
Mountingsee datasheets of relevant enclosures
GroundingM6 external grounding points
Ambient conditions
Ambient temperature-40 ... 50 °C (-40 ... 122 °F)
depending on integrated components
Data for application in connection with hazardous areas
EU-type examination certificateINERIS 14 ATEX 0035X
MarkingEx-Hexagon II 2 GD
Ex db IIC T* Gb
Ex tb IIIC T** °C Db
T6/T85 °C
T5/T100 °C
T4/T135 °C
T3/T200 °C
depending on configuration, ambient temperature and built-in power loss
International approvals
IECEx approvalIECEx INE 14.0042X
Further approvalsavailable on request
Conformity
Degree of protectionEN 60529
CE marking0080 or 0102, see type label
General information
Ordering informationThis Wireless Access Point solution will be delivered completely configured and assembled ready for use. For configuration details please contact customer service.
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
General specifications
Installed componentsAll major WI-FI Access Point vendors such as Aruba, Cisco, ect.

Classifications

SystemClasscode
ECLASS 13.027180502
ECLASS 12.027180502
ECLASS 11.027180502
ECLASS 10.0.127180502
ECLASS 9.027180502
ECLASS 8.027180508
ECLASS 5.127180502
ETIM 9.0EC002503
ETIM 8.0EC002503
ETIM 7.0EC002503
ETIM 6.0EC002503
ETIM 5.0EC002503
UNSPSC 12.139121314

Details: GUB3L.I.CP-Y*

Product Documentation: GUB3L.I.CP-Y*

Seleccionar idioma:
Brief InstructionsIdiomaTipo de archivoTamaño
Brief Instructions - GUB* / GUBX*ENGPDF316 KB

Approvals: GUB3L.I.CP-Y*

Seleccionar idioma:
CertificatesNúmero de CertificadoIdiomaTipo de archivoTamaño
Europe INERIS ATEXINERIS 14 ATEX 0035XALLPDF529 KB
Worldwide INERIS IECEx Certificate of ConformityIECEx INE 14.0042XALLLINK---