Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Termék leírása |
---|
Single head system |
General specifications | ||
---|---|---|
Sensing range | 200 ... 4000 mm | |
Adjustment range | 240 ... 4000 mm | |
Dead band | 0 ... 200 mm | |
Standard target plate | 100 mm x 100 mm | |
Transducer frequency | approx. 85 kHz | |
Nominal ratings | ||
Linearity error | < 40 mm | |
Temperature drift | < +/- 100 mm | |
Time delay before availability | ≤ 700 ms | |
Functional safety related parameters | ||
MTTFd | 431 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Indicators/operating means | ||
LED yellow | object in evaluation range | |
LED red/green | CANopen status display | |
Electrical specifications | ||
Operating voltage | 9 ... 30 V | |
No-load supply current | ≤ 50 mA | |
Power consumption | typ. 0.6 W | |
Interface | ||
Interface type | CAN | |
Communication protocol | CANopen | |
Process data | Input: 48 Bit - measured value (distance value) 16 Bit - signal quality 8 Bit - counter-1 16 Bit or counter-2 8 Bit - status register 8 Bit |
|
Node ID | programmable | |
Vendor ID | 173 (0xAD) | |
Product code | 50331651 (0x03000003) | |
Transfer rate | 250 kBit/s , programmable 125 ... 1000 kBit/s | |
Termination | external | |
Cycle time | 53.5 ms preset , programmable | |
Min. cycle time | 53.5 ms | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
|
Communication interface | CiA 310, Ver. 4.2.0 | |
Approvals and certificates | ||
UL approval | cULus Listed, Class 2 Power Source | |
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
UN/ECE Regulation No. 10 (E1) | Type-approval number: 10R-069608 | |
Ambient conditions | ||
Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | Connector plug | |
Degree of protection | IP68 | |
Material | ||
Housing | PA-GF35 | |
Connector | ||
Threading | M12 | |
Number of pins | 5 | |
Mass | 180 g | |
Dimensions | ||
Height | 40 mm | |
Width | 40 mm | |
Length | 67 mm | |
Factory settings | ||
Default setting | measured value "distance", signal quality, counter-2 (object 0x2000) |
|
Beam width | wide (object 0x4000) | |
Synchronization | deactivated (object 0x2020) | |
Node ID | 16 | |
Transfer rate | 250 kBit/s |
System | Classcode |
---|---|
ECLASS 13.0 | 27272803 |
ECLASS 12.0 | 27272803 |
ECLASS 11.0 | 27272803 |
ECLASS 10.0.1 | 27272803 |
ECLASS 9.0 | 27272803 |
ECLASS 8.0 | 27272803 |
ECLASS 5.1 | 27272803 |
ETIM 9.0 | EC001849 |
ETIM 8.0 | EC001849 |
ETIM 7.0 | EC001849 |
ETIM 6.0 | EC001849 |
ETIM 5.0 | EC001849 |
UNSPSC 12.1 | 41111960 |
Literature | Nyelv | Fájltípus | Fájlméret |
---|---|---|---|
Application Report - Avoid Collisions Reliably and Safely | ENG | 344 KB |
Safety and Security Documentation | Nyelv | Fájltípus | Fájlméret |
---|---|---|---|
Használati útmutató | HUN | 147 KB | |
Manuals | |||
Manual UC***-L2M series, Parameterization of Ultrasonic Sensors with CANopen-Schnittstelle | ENG | 3975 KB |
CAD | Nyelv | Fájltípus | Fájlméret |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 2861 KB |
Certificates | Tanúsítvány sz. | Nyelv | Fájltípus | Fájlméret |
---|---|---|---|---|
Canada USA UL Ordinary Location | UL-US-2153066-0 / UL-CA-2144586-0 | ALL | 546 KB | |
UNECE KBA E1 | 10R-069608 | ALL | 8712 KB | |
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-7212 | ALL | 50 KB | |
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-7213 | ALL | 43 KB |
Device Description Files/Drivers | Megjelenési információ | Fájltípus | Fájlméret |
---|---|---|---|
EDS file for UC4000-L2M-B16* / EDS-Datei für UC4000-L2M-B16* | ZIP | 7 KB | |
CANopen Communication DTM / CANopen Communication DTM | V1.1.0.3 / 2023-11-29 | ZIP | 10721 KB |
DTM for UC*-L2M-B16* / DTM für UC*-L2M-B16* | V1.0.0.8 / 2024-08-27 | ZIP | 17939 KB |
Software Tools | |||
CAN Parameterization Tool / CAN Parametriertool | V1.00.003 / 2024-10-07 | ZIP | 226530 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|