AS-Interface power supply VAN-115/230AC-K19
- Up to 2.8 A output load
- Power factor correction
- Electronic overload protection and display
- LED operating display
- AS-Interface data decoupling
- PELV/SELV
- NEC Class 2 Power Supply
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Adatlap kivonata: Műszaki adatok VAN-115/230AC-K19
| Termék leírása |
|---|
| AS-Interface power supply, data decoupling, 2,8 A |
| General specifications | ||
|---|---|---|
| UL File Number | E223176 | |
| MTBF | 221 a | |
| Indicators/operating means | ||
| LED AS-i ok | LED green: ON: AS-Interface voltage OK OFF: overload or no supply voltage |
|
| Electrical specifications | ||
| Fusing | 2.5 AT (not replacable) | |
| Capacity factor | > 0.5 | |
| Rated operating voltage | nominal: 100 ... 120 VAC/220 ... 240 VAC permissible: 85 ... 132 VAC/184 ... 264 VAC |
|
| Rated operating current | 2.0 A at 115 VAC 0.9 A at 230 VAC |
|
| Supply frequency | 47 ... 63 Hz | |
| Efficiency | 90.5 % (230 VAC, 2.8 A) | |
| Output | ||
| Current limit | > 3.2 A | |
| Voltage | 30.55 VDC ± 3 % fixed setting | |
| Current | 2.8 A | |
| Residual ripple | ≤ 50 mVss (500 kHz bandwidth, 50-Ω-measurement with ohmic load) | |
| Short-circuit current | min. 3.2 A, max. 4.6 A | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| Low Voltage Directive 2006/95/EC | EN 60950-1:2006, EN 61204-3:2001 | |
| EMC Directive 2004/108/EC | EN 61000-6-2:2005, EN 61000-6-3:2007, EN 50295:1999 | |
| Standard conformity | ||
| Electromagnetic compatibility | EN 61000-6-2:2005; EN 61000-6-3:2007 | |
| AS-Interface | EN 50295:1999, IEC 62026-2:2006 | |
| Mech. capacity | EN 60068-2-6:2008 | |
| Shock and impact resistance | EN 60068-2-27:1995 | |
| Ambient conditions | ||
| Ambient temperature | -10 ... 70 °C (14 ... 158 °F) | |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Shock and impact resistance | 15g/6 ms 10g/11 ms |
|
| Vibration resistance | 2 ... 17,8 Hz / 1.6 mm 17.8 ... 500 Hz / 2.0 g |
|
| Pollution degree | 2 (EN 60950) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Protection class | I, Protective conductor connection necessary | |
| Connection | Connection terminals, max. conductor cross-section 0.5 ... 6 mm2 (20-10 AWG), Stripping length 7 mm | |
| Mass | approx. 500 g | |
| Dimensions | ||
| Height | 124 mm | |
| Width | 49 mm | |
| Length | 102 mm | |
| Mounting | DIN mounting rail | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27040301 |
| ECLASS 12.0 | 27040301 |
| ECLASS 11.0 | 27040301 |
| ECLASS 10.0.1 | 27040301 |
| ECLASS 9.0 | 27040301 |
| ECLASS 8.0 | 27040301 |
| ECLASS 5.1 | 27040301 |
| ETIM 9.0 | EC002540 |
| ETIM 8.0 | EC002540 |
| ETIM 7.0 | EC002540 |
| ETIM 6.0 | EC002540 |
| ETIM 5.0 | EC002540 |
| UNSPSC 12.1 | 39121004 |
Details: VAN-115/230AC-K19
Function
The primary pulsed power supply was developed for fieldbus applications that transfer power and data via one two-wire line
(AS-Interface concept). With an output current of 2.8 A, it supplies a fully configured AS-Interface system.
In this case, the power supply is responsible for supplying power, decoupling the data to the supply source and providing for symmetry of the two output lines (AS-Interface + and AS-Interface -) relative to the machine mass (shield connection).
The exact and transformatory coupling permits the use of unshielded load lines.
The input voltage range of the device can be selected with a switch. Thus, the power supply can be operated on all conventional single-phase mains voltages worlwide.
Fusing:
The power supply is protected electronically against external short circuits. The internal fuse disconnects the power supply from the network in the case of a defect.
Product Documentation: VAN-115/230AC-K19
| Brief Instructions | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 262 KB |
Design / Simulation: VAN-115/230AC-K19
| CAD | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 16846 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
| CAE | |||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 80 KB |
Approvals: VAN-115/230AC-K19
| Certificates | Tanúsítvány sz. | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|---|
| US CA UL | E223176 | ALL | LINK | --- |
| US CA UL | CoC E223176 RptRef E223176-20070416 | ALL | 444 KB | |
| Worldwide AS-International Association AS-Interface | 92901 | ALL | 585 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-4815A | ALL | 164 KB | |
Kapcsolódó termékek: VAN-115/230AC-K19
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Ebben az ingyenes PDF tanulmányban összehasonlítjuk a különböző TCP-alapú kommunikációs protokollokat (AMQP, OPC UA, MQTT, REST API), amelyek kimagaslanak a mezőnyből és amiket az IIoT-t és az Ipar 4.0-t lehetővé tevő technológiaként tartanak számon. Töltse le ingyenesen most!
Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
+36 88 545 902
A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.