AS-Interface power supply VAN-24DC-K28
- Output current max. 4 A
- PELV
- Input voltage 24 V DC
- LED operating display
- 90.5 % efficiency level
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Adatlap kivonata: Műszaki adatok VAN-24DC-K28
| Termék leírása |
|---|
| AS-Interface power supply, data decoupling, 4 A, 24 V DC input voltage |
| General specifications | ||
|---|---|---|
| UL File Number | E223176 | |
| MTBF | 100 a | |
| Indicators/operating means | ||
| LED AS-i ok | LED green: ON: AS-Interface voltage OK OFF: overload or no supply voltage |
|
| Electrical specifications | ||
| Fusing | T10A HBC (not accessible) | |
| Rated operating voltage | 24 VDC 18 ... 32,4 VDC (continuous operation) 14 ... 18 VDC (max. 60 s or with derating) max. 36 VDC (max. continuous input voltage with no damage to the DC/DC converter) |
|
| Rated operating current | 5.6 A at 24 VDC | |
| Efficiency | typ. 90.5 % (24 VDC, 4 A) | |
| Output | ||
| Short-circuit protection/overload | > 5 A < 9 A |
|
| Current limit | > 4.4 A | |
| Voltage | 30.55 VDC ±3 % fixed setting | |
| Current | 4 A | |
| Residual ripple | < 50 mVSS (500 kHz bandwidth, 50 Ω measurement, with resistive load) | |
| Voltage limitation | max. 36 V | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 55022:2006, EN 55011:2009 Class B EN 61000-6-3:2001 , EN 61204-3:2001 |
|
| Standard conformity | ||
| Noise immunity | EN 61000-6-2:2005 | |
| Emitted interference | EN 61000-6-3:2007 EN 61000-3-2:2010 EN 61000-3-3:2009 |
|
| Galvanic isolation | IEC 60364-4-41:2005 (PELV) IEC 60950:1999 (SELV) |
|
| Degree of protection | IEC 60529:2001 | |
| Pollution degree | EN 60950-1:2006 | |
| Shock and impact resistance | EN 60068-2-27:1995 | |
| Vibration resistance | EN 60068-2-6:2008 | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) note derating |
|
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Shock and impact resistance | 30g/6 ms 20g/11 ms |
|
| Vibration resistance | Sine 2 - 17.8 Hz: ± 1.6 mm Sine 17.8 ... 500 Hz : 2 g |
|
| Pollution degree | 2 | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Protection class | 1 (IEC 60536); Protective conductor connection necessary | |
| Connection | Connection terminals, max. conductor cross-section Flexible cable: 0.5 … 4 mm2 Rigid cable: 0.5 … 6 mm2 Stripping length 7 mm |
|
| Mass | approx. 500 g | |
| Dimensions | ||
| Height | 124 mm | |
| Width | 40 mm | |
| Length | 102 mm | |
| Mounting | DIN mounting rail | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27040301 |
| ECLASS 12.0 | 27040301 |
| ECLASS 11.0 | 27040301 |
| ECLASS 10.0.1 | 27040301 |
| ECLASS 9.0 | 27040301 |
| ECLASS 8.0 | 27040301 |
| ECLASS 5.1 | 27040301 |
| ETIM 9.0 | EC002540 |
| ETIM 8.0 | EC002540 |
| ETIM 7.0 | EC002540 |
| ETIM 6.0 | EC002540 |
| ETIM 5.0 | EC002540 |
| UNSPSC 12.1 | 39121004 |
Details: VAN-24DC-K28
Function
The VAN-24DC-K28 DC/DC transducer was designed for field bus applications, which transmit both energy and data via a two-wire cable
(AS-Interface design). It powers a fully loaded AS-Interface system with a maximum output current of 30.55 V and 4 A.
In this case, the DC/DC transducer provides the energy, decouples data of the power source and balances the two output cables
(AS-Interface + and AS-Interface -) in relation to ground (screen connection).
The precise and transformer coupling permits the use of unshielded load lines.
The PELV output circuit is electronically protected against overload and continuous short circuit.
Fusing:
The DC/DC transducer is electronically protected against continuous short circuit. In case of a defect, the internal fuse disconnects the DC/DC transducer from the power supply.
Product Documentation: VAN-24DC-K28
| Brief Instructions | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 269 KB |
Design / Simulation: VAN-24DC-K28
| CAD | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 5729 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: VAN-24DC-K28
| Certificates | Tanúsítvány sz. | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|---|
| US CA UL | E223176 | ALL | LINK | --- |
| US CA UL | CoC E223176 RptRef E223176-20070416 | ALL | 444 KB | |
| Worldwide AS-International Association AS-Interface | 95101 | ALL | 382 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-4816 | ALL | 264 KB | |
Kapcsolódó termékek: VAN-24DC-K28
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Ebben az ingyenes PDF tanulmányban összehasonlítjuk a különböző TCP-alapú kommunikációs protokollokat (AMQP, OPC UA, MQTT, REST API), amelyek kimagaslanak a mezőnyből és amiket az IIoT-t és az Ipar 4.0-t lehetővé tevő technológiaként tartanak számon. Töltse le ingyenesen most!
Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
+36 88 545 902
A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.