RFID evaluation unit IC-KP2-1HB6-V15B
- LED status indicator of bus communication and read/write head
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Adatlap kivonata: Műszaki adatok IC-KP2-1HB6-V15B
| Termék leírása |
|---|
| IDENTControl Compact RFID evaluation unit with interface for PROFIBUS DP |
| General specifications | ||
|---|---|---|
| Number of read/write heads | max. 1 | |
| UL File Number | E87056 | |
| MTBF | 70 a (Operation at +40 °C) | |
| Indicators/operating means | ||
| LED BUS | green: Slave is at state "Data Exchange" red: Bus error |
|
| LED Diag | No function | |
| LED 1 | Status indicator for read/write head green: command at read/write head active yellow: approx. 1 second long, if command was successfully executed |
|
| LED CH1 | green: read head detected red: Configuration error |
|
| LED PWR/ERR | green: power on red: Hardware fault |
|
| Rotary switch | Address setting 00 ... 7E, FF (hexadecimal) BUS Address (high nibble): 0 ... 7, F BUS Address (low nibble): 0 ... F |
|
| Electrical specifications | ||
| Rated operating voltage | 20 ... 30 V DC , PELV | |
| Ripple | ≤ 10 % at 30 V DC | |
| Current consumption | ≤ 4 A incl. read/write heads | |
| Power consumption | 2 W Without read/write head | |
| Galvanic isolation | basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff | |
| Interface 1 | ||
| Interface type | PROFIBUS | |
| Physical | RS-485 | |
| Protocol | PROFIBUS DP acc. to EN 50170 | |
| Transfer rate | 9.6; 19.2; 93.75; 187.5; 500; 1500 kBit/s 3; 6; 12 Mbit/s self-synchronizing |
|
| Interface 2 | ||
| Interface type | Diagnostic Interface | |
| Physical | RS 232 | |
| Protocol | ASCII | |
| Transfer rate | 38.4 kBit/s | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61000-6-2 EN 61000-6-4 |
|
| RoHS | ||
| Directive 2011/65/EU (RoHS) | IEC/EN 63000 | |
| Standard conformity | ||
| Degree of protection | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Climatic conditions | air humidity max. 96 % Salt spray resistant to EN 60068-2-52 |
|
| Shock and impact resistance | Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6 Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27 |
|
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | read/write head: M12 plug connection, 4-pin, screened, Power supply: M12 connector Protective earth: M4 earthing screw Diagnostic RS 232: M12 connector PROFIBUS: M12 connector, B-coded |
|
| Material | ||
| Housing | powder coated aluminum | |
| Installation | screw fixing | |
| Mass | approx. 300 g | |
| Dimensions | ||
| Height | 42 mm | |
| Width | 62 mm | |
| Length | 137 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280401 |
| ECLASS 12.0 | 27280401 |
| ECLASS 11.0 | 27280401 |
| ECLASS 10.0.1 | 27280401 |
| ECLASS 9.0 | 27280401 |
| ECLASS 8.0 | 27280401 |
| ECLASS 5.1 | 27280401 |
| ETIM 9.0 | EC002998 |
| ETIM 8.0 | EC002998 |
| ETIM 7.0 | EC002998 |
| ETIM 6.0 | EC002998 |
| ETIM 5.0 | EC002998 |
| UNSPSC 12.1 | 43211710 |
Details: IC-KP2-1HB6-V15B
Function
The RFID identification system IDENTControl Compact from Pepperl+Fuchs offers a vast number of benefits compared to other systems, thanks to its innovative design. The control interfaces IDENTControl and IDENTControl Compact make up the core of the system.
With its integrated interfaces to all commercially available fieldbus systems such as PROFIBUS, PROFINET, Ethernet, EtherCAT, CC-Link, serial connections (RS 232 or RS 485) and numerous connection options for read/write heads available for frequency ranges LF, HF and UHF, the IDENTControl Compact control interface can be easily and flexibly adapted to your requirements.
LEDs on the front of the housing indicate bus communication, connected read/write heads and active read/write commands. Reliability of the application is further increased by using trigger sensors.
The system is equally suited for use in control cabinets and field use in IP67. The interface to the higher-level fieldbus is integrated in the housing, and all connections are designed such that they are pluggable. This enables simple installation and quick, problem-free replacement in case of device failure. The consistent EMC design, with metal housing, grounding and shielded wires, offers a high degree of reliability.
Informative Literature: IC-KP2-1HB6-V15B
| Literature | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Application Report - RFID Systems in Industrial Metal Stamping | ENG | 1773 KB | |
| Application Report - Safe Assignment of Workpiece and Tool | ENG | 204 KB |
Product Documentation: IC-KP2-1HB6-V15B
| Brief Instructions | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Brief Instructions - IC-KP2-* | ENG | 2285 KB | |
| Commissioning IC-KP2-1HB6 with Profinet at S7 PLC | ENG | 204 KB | |
| Manuals | |||
| Manual IC-KP2-1HB6-V15B | ENG | 1496 KB | |
| Manual Read / Write Ranges and Passing Speeds RFID | ENG | 3640 KB | |
Design / Simulation: IC-KP2-1HB6-V15B
| CAD | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1666 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: IC-KP2-1HB6-V15B
| Certificates | Tanúsítvány sz. | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|---|
| Canada, USA UL | CoC UL-CA-L87056-31-61115002-0 / UL-US-L87056-11-61115002-0 | ALL | 561 KB | |
| Korea Radio Approval | MSIP-REI-PF1-ICKP21HB6V15B | ALL | 366 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0687E | ALL | 111 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6844 | ALL | 108 KB | |
Software: IC-KP2-1HB6-V15B
Kapcsolódó termékek: IC-KP2-1HB6-V15B
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Látogasson el „RFID-központunkba” – ez a speciális weboldal egy, a rádiófrekvenciás azonosítással kapcsolatos tudásbázist tartalmaz. Böngésszen a gyakran feltett kérdések között és tudjon meg többet az elterjedt RFID-alkalmazásokról…
Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
+36 88 545 902
A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.