ASi illuminated button module VAA-LT3-F86-V1
- Empty housing for the installation of up to 6 built-in buttons, built-in lamps or similar with diameter 22 mm
- Connection of the illuminated pushbuttons via pluggable screw terminals
- Degree of protection IP65 possible
- Integrated communication monitoring function
- Inputs and outputs short-circuit and overload proof
- No external power supply required
- M12 plug for simple connection to AS-Interface
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Adatlap kivonata: Műszaki adatok VAA-LT3-F86-V1
| Termék leírása |
|---|
| Luminous push-button module, 4 inputs/4outputs |
| General specifications | ||
|---|---|---|
| Node type | Standard node | |
| AS-Interface specification | V2.0 | |
| Required gateway specification | ≥ V2.0 | |
| Electrical specifications | ||
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface | |
| Rated operating current | ≤ 30 mA (without sensors) / max. 180 mA | |
| Protection class | III | |
| Input | ||
| Number/Type | 4 inputs for mechanical contacts | |
| Supply | from AS-Interface | |
| Voltage | 21 ... 31 V | |
| Input current | ≤ 8 mA (limited internally) | |
| Switching point | according to EN 61131-2 Typ 1 | |
| 0 (unattenuated) | ≤ 1.5 mA | |
| 1 (attenuated) | ≥ 4 mA | |
| Output | ||
| Number/Type | 4 electronic outputs, PNP | |
| Supply | from AS-Interface | |
| Voltage | 21 ... 31 V | |
| Current | ≤ 100 mA per output, ≤ 140 mA total | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 62026-2:2013 | |
| Standard conformity | ||
| Degree of protection | EN 60529:2000 | |
| AS-Interface | EN 62026-2:2013 | |
| Programming instructions | ||
| Profile | S-7.0 | |
| IO code | 7 | |
| ID code | 0 | |
| ID1 code | F | |
| ID2 code | E | |
| Data bits (function via AS-Interface) | ||
| D0 | ||
| D1 | ||
| D2 | ||
| D3 | ||
| Parameter bits (programmable via AS-i) | function | |
| P0 | not used | |
| P1 | not used | |
| P2 | not used | |
| P3 | not used | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 40 °C (-13 ... 104 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP65 in accordance with EN 60529 (with corresponding displays and controls) | |
| Connection | M12 round connector | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27371228 |
| ECLASS 12.0 | 27371228 |
| ECLASS 11.0 | 27371228 |
| ECLASS 10.0.1 | 27371228 |
| ECLASS 9.0 | 27371228 |
| ECLASS 8.0 | 27371228 |
| ECLASS 5.1 | 27371228 |
| ETIM 9.0 | EC001028 |
| ETIM 8.0 | EC001028 |
| ETIM 7.0 | EC001028 |
| ETIM 6.0 | EC001028 |
| ETIM 5.0 | EC001028 |
| UNSPSC 12.1 | 39121533 |
Details: VAA-LT3-F86-V1
Function
The VAA-LT3-F86-V1 light sensor module creates a connection between the operating personnel and the AS-Interface master. The housing is designed in combination with suitable display and control elements in protection type IP65.
The internal AS-Interface I/O module is ideally suited to integrating customer-specific electronics, for example light sensors or LED lights. The printed circuit board is supplied entirely from the AS-Interface. The inputs and outputs are protected against short circuits and overload and the connection between the display and control elements and the AS-Interface circuit board can be plugged in with screw-on plug-in terminals. The connection to the AS-Interface is implemented by means of a V1 round plug (M12 x 1).
An overloading of the outputs is signalled to the AS-Interface master via the "Peripheral fault" function. Communication via the AS-Interface remains intact.
The luminous push-button module can be expanded by means of an additional printed circuit board module VAA-4E4A-CB1-Z/E2.
Note:
Communication monitoring is integrated. This switches the outputs to a currentless state if no communication is taking place over the AS-Interface cable.
Product Documentation: VAA-LT3-F86-V1
| Brief Instructions | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 360 KB |
Approvals: VAA-LT3-F86-V1
| Declaration of Conformity | Tanúsítvány sz. | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2715B | ALL | 116 KB |
Kapcsolódó termékek: VAA-LT3-F86-V1
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Ebben az ingyenes PDF tanulmányban összehasonlítjuk a különböző TCP-alapú kommunikációs protokollokat (AMQP, OPC UA, MQTT, REST API), amelyek kimagaslanak a mezőnyből és amiket az IIoT-t és az Ipar 4.0-t lehetővé tevő technológiaként tartanak számon. Töltse le ingyenesen most!
Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
+36 88 545 902
A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.