Current/Voltage Converter KFD0-CC-Ex1

1-channel isolated barrier
24 V DC supply (loop powered)
Current or voltage input
Output: 4 ... 20 mA
Potentiometer or DIP switch selectable ranges
Line fault detection (LFD)

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
関連製品
お問い合わせ

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

データシート(PDF):

技術データ KFD0-CC-Ex1

General specifications
Signal type		Analog input
Supply
Rated voltage		12 ... 35 V DC loop powered
Power dissipation		0.4 W
Input
Connection side		field side
Connection		terminals 1+, 2-
Current range		0 ... 20 mA , load ≤ 50 Ω
Voltage range		0 ... 10 V , load ≥ 100 kΩ
Output
Connection side		control side
Connection		terminals 9+, 8-
Load		(U -12 V) / 0.02 A
Current output		4 ... 20 mA , limited to ≤ 35 mA
Fault signal		downscaling ≤ 3 mA
Transfer characteristics
Deviation
	After calibration	0.1 % of full-scale value
	Temperature effect	span: 0.050 % of span /K ; zero point: 0.060 % of span /K
	Linearization	≤ 0.04 % of full-scale value
	Influence of supply voltage	6.5 ppm/V
Rise time		250 ms
Galvanic isolation
Input/Output		safe isolation according to EN 50178, rated insulation voltage 253 V_eff
Indicators/settings
Control elements		DIP switch potentiometer
Configuration		via DIP switches via potentiometer
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Galvanic isolation		EN 50178:1997
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 100 g
Dimensions		20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
	Height	119 mm
	Width	20 mm
	Depth	115 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		ZELM 00 ATEX 0034
	Marking	II (1)GD [EEx ia] IIC
	Input	EEx ia IIC
	Voltage	9.6 V
	Current	0.5 mA
	Power	1.1 mW linear characteristic
Output
	Maximum safe voltage	60 V (Attention! The rated voltage can be lower.)
Certificate		TÜV 01 ATEX 1777 X
	Marking	II 3G Ex nA II T4
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
CSA approval
	Control drawing	116-0132
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210107
ECLASS 12.0	27210107
ECLASS 11.0	27210107
ECLASS 10.0.1	27210107
ECLASS 9.0	27210107
ECLASS 8.0	27210107
ECLASS 5.1	27210107
ETIM 9.0	EC002475
ETIM 8.0	EC002475
ETIM 7.0	EC002475
ETIM 6.0	EC002475
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: KFD0-CC-Ex1

Informative Literature: KFD0-CC-Ex1

Literature	言語	ファイルタイプ	ファイルサイズ
Application Report - Biological Cleaning of Wastwater and Secondary Sedimentation Stage	ENG	PDF	566 KB
Application Report - Energy Generation in Wastwater Treatment Plants	ENG	PDF	532 KB
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Sand Trap and Preliminary Sedimentation Stage	ENG	PDF	448 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB
Application Report - Sicherer Brennstofftransport in Kohlekraftwerken	ENG	PDF	391 KB
Application Report - Water Inlet in Wastewater Treatment Plants	ENG	PDF	526 KB

Product Documentation: KFD0-CC-Ex1

Safety and Security Documentation	言語	ファイルタイプ	ファイルサイズ
Instruction manual	ENG	PDF	50 KB
Manuals
Manual	ENG	PDF	3685 KB

Design / Simulation: KFD0-CC-Ex1

CAD	言語	ファイルタイプ	ファイルサイズ
CAD 3-D / CAD 3-D	ALL	STP	2510 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	940 KB

Approvals: KFD0-CC-Ex1

Certificates	認証番号	言語	ファイルタイプ	ファイルサイズ
Canada CSA	CoC 1029981 C	ALL	PDF	177 KB
Europe TUV Nord ATEX Category 3	TÜV 01 ATEX 1777X	ALL	PDF	767 KB
Europe ZELM ATEX Category (1) GD	ZELM 00 ATEX 0034	ALL	PDF	448 KB
South Africa MASC Zone 2	MASC S/17-0871X	ALL	PDF	1028 KB
Control Drawings
Control drawing CSA / Control drawing CSA		ALL	PDF	54 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)	TDOC-0768DENG	ENG	PDF	184 KB

関連製品: KFD0-CC-Ex1

Matching System Components

	K-DUCT-BU Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

Accessories

	KF-ST-5GN Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces greenpa

	KF-ST-5BU Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces bluepa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

General Notes Relating to Pepperl+Fuchs Product Information

クイックリンク

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.