AS-Interface I/O module VBA-3E3A-G20-ZEL/E2L-P1

A/B slave with extended addressing possibility for up to 62 slaves
Inputs for 3-wire sensors
Power supply of the inputs and outputs from the external auxiliary voltage
Connection of actuators and sensors via cable outputs with M8 connectors
Communication monitoring
Function display for bus, external auxiliary voltage, in- and outputs
Cable piercing method with gold plated contact pins

Technical Data
Informative Literature
Product Documentation
Design / Simulation
関連製品
お問い合わせ

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

データシート(PDF):

技術データ VBA-3E3A-G20-ZEL/E2L-P1

型番
G20 module for digital inputs/outputs, 3 inputs and 3 outputs

General specifications
Node type		A/B node
AS-Interface specification		V3.0
Required gateway specification		≥ V2.1
UL File Number		E223772 "For use in NFPA 79 Applications only"
MTBF		110 a
Indicators/operating means
LED FAULT		error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or overload of outputs or external auxiliary voltage U_AUX missing
LED PWR		AS-Interface voltage; green LED green: voltage OK flashing green: address 0 or overload of sensor power supply or overload of outputs or external auxiliary voltage U_AUX missing
LED AUX		ext. auxiliary voltage U_AUX; dual LED green/red green: voltage OK red: reverse voltage
LED IN		switching state (input); 3 LED yellow
LED OUT		Switching state (output); 3 LED yellow
Electrical specifications
Auxiliary voltage (output)		20 ... 30 V DC PELV
Rated operating voltage		26.5 ... 31.6 V from AS-Interface
Rated operating current		≤ 35 mA
Input
Number/Type		3 Inputs for 3-wire sensors (PNP), DC
Supply		from external auxiliary voltage U_AUX
Current loading capacity		500 mA , overload and short-circuit protected
Input current		≤ 8 mA (limited internally)
Switching point		according to DIN EN 61131-2 0 (undamped) ≤ 0.5 mA 1 (damped) ≥ 2.0 mA
Signal delay		< 1 ms (input/AS-Interface)
Output
Number/Type		3 electronic outputs, PNP, overload and short-circuit proof
Supply		from external auxiliary voltage U_AUX
Voltage		≥ (U_AUX - 0.5 V)
Current		2 A per output TB ≤ 40 °C: 6 A total TB ≤ 60 °C: OUT1+OUT2 max. 3 A, OUT3 max. 2 A
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 62026-2:2013
Standard conformity
Degree of protection		EN 60529:2000
Fieldbus standard		EN 62026-2:2013
Input		EN 61131-2:2007
Emitted interference		EN 61000-6-4:2007
AS-Interface		EN 62026-2:2013
Noise immunity		EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013
Programming instructions
Profile		S-7.A.E
IO code		7
ID code		A
ID1 code		7
ID2 code		E
Data bits (function via AS-Interface)		InputOutput
	D0	IN1 OUT1
	D1	IN2 OUT2
	D2	IN3 OUT3
	D3	- -
Parameter bits (programmable via AS-i)		function
	P0	Communication monitoring P0 = 0 monitoring = off, the outputs maintain the status if communication fails P0 = 1 monitoring = on, i.e. if communication fails, the outputs are deenergised (default settings)
	P1	Input filter P1 = 0 input filter on, pulse suppression ≤ 2 ms P1 = 1 input filter off (default settings)
	P2	Synchronous mode P2 = 0 synchronous mode on P2 = 1 synchronous mode off (default settings)
Ambient conditions
Ambient temperature		-25 ... 60 °C (-13 ... 140 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Degree of protection		IP54 according to EN 60529
Connection		AS-Interface, AUX: Insulation piercing technology Yellow flat cable/black flat cable Inputs/outputs: M8 round plug connector in accordance with EN 61076-2-104 Inputs: LF004-GS1-A (4-pin, bushing contacts, screw lock, A-coded) Matching connector: LM004-Gx1-A or similar Outputs: NF003-SS1-A (3-pin, bushing contacts, snap lock, A-coded) Matching connector: NM003-Sx1-A or similar
Mass		260 g
Dimensions
	Height	27.5 mm
	Width	131.5 mm
	Length	54 mm
Mounting		2 clips with ∅ 8 mm drill hole
Cable length		1 m
Note		The flat cable routing is designed for 100 actuation cycles

Classifications

System	Classcode
ECLASS 13.0	27242604
ECLASS 12.0	27242604
ECLASS 11.0	27242604
ECLASS 10.0.1	27242604
ECLASS 9.0	27242604
ECLASS 8.0	27242604
ECLASS 5.1	27242604
ETIM 9.0	EC001599
ETIM 8.0	EC001599
ETIM 7.0	EC001599
ETIM 6.0	EC001599
ETIM 5.0	EC001599
UNSPSC 12.1	39121535

Details: VBA-3E3A-G20-ZEL/E2L-P1

Informative Literature: VBA-3E3A-G20-ZEL/E2L-P1

Literature	言語	ファイルタイプ	ファイルサイズ
Portfolio overview G20 modules / Portfolio-Übersicht G20-Module	ALL	PDF	121 KB

Product Documentation: VBA-3E3A-G20-ZEL/E2L-P1

Brief Instructions	言語	ファイルタイプ	ファイルサイズ
Instruction leaflet / Beipackzettel	ALL	PDF	225 KB

Design / Simulation: VBA-3E3A-G20-ZEL/E2L-P1

CAD	言語	ファイルタイプ	ファイルサイズ
CAD 3-D / CAD 3-D	ALL	STP	1720 KB

関連製品: VBA-3E3A-G20-ZEL/E2L-P1

Accessories

	VBP-HH1-V3.0-KIT AS-Interface Handheld with accessory
	AS-Interface Handheld with accessoryfa

	VAZ-PK/G20-1M-V1-G Adapter cable G20 module/hand-held programming device
	Adapter cable G20 module/hand-held programming devicefa

	VAZ-G20-MH Mounting aid
	Mounting aidfa

General Notes Relating to Pepperl+Fuchs Product Information

Free Download: White Paper on TCP-Based Communication Protocols (PDF)

This free PDF white paper compares the different TCP-based communication protocols (AMQP, OPC UA, MQTT, REST API) that have found their way up and are considered the enablers of IIoT and Industry 4.0. Get your free download now!

AS-Interface Switch Cabinet Module KE5 – Simple Handling and Improved Manageability

The unique housing design of the new KE5 switch cabinet module enables distinct visibility and simplifies mounting, wiring, and maintenance inside switch cabinets and junction boxes.