Advanced Diagnostic Kit KT-MB-DMA

FieldConnex® Fieldbus

Comprehensive diagnostics for the fieldbus physical layer
Module and motherboard for retrofit of any installation
Precise measurements through passive circuits
For commissioning, online monitoring and troubleshooting
For FOUNDATION Fieldbus H1 and PROFIBUS PA
Installation in Zone 2/Class I, Div. 2
System state and fault indication via LEDs
Display of data in the safety of the control room
Full software integration into PCS and PAM possible

Technical Data
Informative Literature
Product Documentation
Approvals
Software
関連製品
お問い合わせ

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

データシート(PDF):

技術データ KT-MB-DMA

型番
Advanced diagnostic kit for retrofitting advanced diagnostics

General specifications
Design / Mounting		Motherboard based
Installation in hazardous area		Zone 2 / Div. 2
Supply
Rated voltage		19.2 ... 35 V
Rated current		110 ... 30 mA
Power dissipation		max. 2 W
Fieldbus connection
Number of segments		4
Fieldbus type		FOUNDATION Fieldbus/PROFIBUS PA
Indicators/operating means
LED PRI PWR		green: on, primary bulk power supply connected
LED SEC PWR		green: on, secondary bulk power supply connected
LED Seg 1...4		yellow: bus activity; red 2 Hz flashing: alarm; red: hardware error
Fault signal		VFC alarm 1 A, 50 V DC, normally closed
DIP switch		diagnostic address 1...247, binary coded
Interface
Interface type		diagnostic bus: RS 485
Directive conformity
Electromagnetic compatibility
	Directive 2004/108/EC	EN 61326-1:2006
Standard conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		< 95 % non-condensing
Shock resistance		15 g 11 ms
Vibration resistance		1 g , 10 ... 150 Hz
Mechanical specifications
Connection type		screw terminal , pluggable
Core cross section		2.5 mm²
Housing material		Polycarbonate
Degree of protection		IP20
Mass		approx. 290 g
Dimensions
	Height	220 mm
	Width	50 mm
	Depth	162 mm
Mounting		DIN rail mounting
International approvals
FM approval
	FM certificate	FM 19 US 0015 X and FM 19 CA 0011 X
	FM marking	AEx/Ex ec IIC T4
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27242692
ECLASS 12.0	27242692
ECLASS 11.0	27242692
ECLASS 10.0.1	27242692
ECLASS 9.0	27242692
ECLASS 8.0	27242692
ECLASS 5.1	27242692
ETIM 9.0	EC001604
ETIM 8.0	EC001604
ETIM 7.0	EC001604
ETIM 6.0	EC001604
ETIM 5.0	EC001604
UNSPSC 12.1	39121008

Details: KT-MB-DMA

Informative Literature: KT-MB-DMA

Literature	言語	ファイルタイプ	ファイルサイズ
Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron	ENG	PDF	361 KB
Application Report - Digital Communication in Steel-Plate Manufacturing	ENG	PDF	470 KB

Product Documentation: KT-MB-DMA

Product information	言語	ファイルタイプ	ファイルサイズ
Technical Information Advanced Diagnostic with Yokogawa Plant Resource Manager (PRM)	ENG	PDF	2551 KB
Manuals
Manual	ENG	PDF	25397 KB

Approvals: KT-MB-DMA

Certificates	認証番号	言語	ファイルタイプ	ファイルサイズ
Canada FM	FM 19 CA 0011X	ALL	PDF	356 KB
USA FM	FM 19 US 0015X	ALL	PDF	213 KB

Software: KT-MB-DMA

Software Tools	Release Info	ファイルタイプ	ファイルサイズ
Diagnostic Manager / Diagnostic Manager	2.2.4.3610	ZIP	87499 KB

関連製品: KT-MB-DMA

Matching System Components

	HD2-DM-A Advanced Diagnostic Module
	FieldConnex® Fieldbus, Advanced diagnostic module, plug-in module for the fieldbus power hub, Comprehensive diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldConnex Power Hub, Precise measurements through passive circuits, For commissioning, online monitoring and troubleshooting, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canadapa

	KT-MB-GT2AD.FF Diagnostic Gateway Kit
	FieldConnex® Fieldbus, Diagnostic gateway kit with Ethernet, FF-H1 interface for advanced diagnostics, System integration kit for Advanced Diagnostics, PCS integration via Diagnostic Manager or device DTM, Simple automatic setup of Advanced Diagnostics, Common alarm handling, For FOUNDATION Fieldbus and PROFIBUS PA, International, Europepa

Accessories

	DTM-FC.AD* Diagnostic Manager Software
	Software user interface for Advanced Diagnostic Modules, Simultaneous access to all ADMs of a plant, Embedded expert system gives pointed advice in clear text, Includes Commissioning Wizard, data historian, oscilloscope..., For FOUNDATION Fieldbus H1 and PROFIBUS PA, Automatic setup of diagnostic systempa

	PACTware 5.0 FDT Framework
	Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Download from Pepperl+Fuchs websitepa

	PACTware 4.1 FDT Framework
	Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Internet download possiblepa

General Notes Relating to Pepperl+Fuchs Product Information

クイックリンク

Ethernet-APL for Process Industries

Ethernet-APL enables continuous communication across all hierarchy levels. Learn more about the pioneering technology …

RSS Info Service for PANOS Updates

Stay informed when a new software update of PANOS, the operating system for Ethernet-APL switches, is released: With our RSS Feed you will get an email notfication in your inbox immediately after an update has been released.

FieldConnex®—Fieldbus Made Easy

From decisions to planning, installation, and commissioning up to operation and maintenance: Discover how to make the most out of your fieldbus infrastructure …

技術