Active infrared scanner TopScan-S-M/L310
- Moving presence sensor for swing doors
- Configurable for a wide range of door leaf widths
- Category 2, tested and certified to DIN 18650/EN 16005
- Modular construction with master/slave modules
- Safe function even on difficult floors
- Each beam can be adjusted individually
- Easy adjustment of transmitter for hinge side/ opposite hinge side
- Single-beam version
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
PDF 파일로 된 데이타 시트 다운로드:
데이타 시트 발췌: 기술 사양 TopScan-S-M/L310
| 제품 설명 |
|---|
| Single or multi-beam light curtain for individual protection according to DIN 18650/EN16005 |
| General specifications | ||
|---|---|---|
| Detection range min. | 0 ... 1500 mm | |
| Detection range max. | 0 ... 2500 mm | |
| Reference target | Minimum degree of reflection of the floor: 6 % Minimum degree of reflection to objects being detected: 0 % |
|
| Light source | IRED | |
| Light type | modulated infrared light 875 nm | |
| Black-white difference (6 %/90 %) | < 2 % at 2000 mm sensor range | |
| Number of beams | 1 (number of built-in sensor modules AIR) | |
| Operating mode | Background evaluation | |
| Diameter of the light spot | 1.1 cm x 8.3 cm at 2000 mm sensor range | |
| Resolution | Reference object CA DIN 186850-1/EN 16005 in all applicable locations | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 1 | |
| Performance level (PL) | PL c | |
| Category | Cat. 2 | |
| MTTFd | 880 a per module | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 90 % | |
| Indicators/operating means | ||
| Function indicator | LED red/green | |
| Control elements | Sensing range adjuster ; Adjuster for edge monitoring left/right | |
| Electrical specifications | ||
| Operating voltage | 24 V DC +/- 20 % | |
| No-load supply current | 75 mA | |
| Input | ||
| Test input | active at U = 11 V DC at 30 V DC inactive at U = -3 V DC at 5 V DC | |
| Output | ||
| Switching type | Relay de-energized at object inside the scanning range | |
| Signal output | Relay, 1 alternator | |
| Switching voltage | 5 V ... 30 V AC/DC | |
| Switching current | max. 300 mA | |
| Response time | ≤ 70 ms | |
| Conformity | ||
| Functional safety | ISO 13849-1 | |
| Product standard | EN 12978 ; EN 16005 ; DIN 18650 | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| TÜV approval | TÜV NORD | |
| Ambient conditions | ||
| Ambient temperature | -10 ... 50 °C (14 ... 122 °F) | |
| Relative humidity | Humidity at 20 °C: < 90 % Humidity at 60 °C: < 50 % |
|
| Mechanical specifications | ||
| Housing length L | 310 mm | |
| Mounting height | max. 2500 mm | |
| Degree of protection | IP52 , IP54 Optional (with special seal) | |
| Connection | screw terminals ; Cable cross-section 0.3 mm2 ... 1.3 mm2 (AWG26-16), single-stranded/multistranded CU | |
| Material | ||
| Housing | aluminum / ABS | |
| Optical face | PMMA | |
| Dimensions | ||
| Height | 42 mm | |
| Depth | 37 mm | |
| Length | 310 mm | |
| Cable length | max. 30 m | |
| Note | Safety fuse ≤ 1 A (slow-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270913 |
| ECLASS 12.0 | 27270913 |
| ECLASS 11.0 | 27270913 |
| ECLASS 10.0.1 | 27270913 |
| ECLASS 9.0 | 27270913 |
| ECLASS 8.0 | 27270913 |
| ECLASS 5.1 | 27270903 |
| ETIM 9.0 | EC002550 |
| ETIM 8.0 | EC002550 |
| ETIM 7.0 | EC002550 |
| ETIM 6.0 | EC002550 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
Details: TopScan-S-M/L310
Informative Literature: TopScan-S-M/L310
| We are sorry, there are no documents for your language selection. Please select another language. |
Product Documentation: TopScan-S-M/L310
| Brief Instructions | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|
| Brief Instructions - for Adjusting TopScan-S / Kurzanleitung - zur Einrichtung des TopScan-S | ALL | 471 KB | |
| Hints for installation of moduls AIR16-S and AIR17-S on device TopScan-S / Einstellhinweise zur Einrichtung der Module AIR16-S und AIR17-S beim Gerät TopScan-S | ALL | 264 KB | |
| Manuals | |||
| Manual | ENG | 2122 KB | |
Design / Simulation: TopScan-S-M/L310
| CAD | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 678 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: TopScan-S-M/L310
| Certificates | 인증서 번호 | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|---|
| /cert/cert0951c.pdf | 44 780 13 095706 | ALL | 109 KB | |
| Europe TUV Nord EC-Type Exam. Certificate Functional Safety | 44 205 13 095705 | ALL | 56 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0118E | ALL | 165 KB | |
관련문서: TopScan-S-M/L310
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
페펄앤드푹스코리아(주)
서울특별시 서초구 서초대로88
6층 (유니온빌딩)
06673 대한민국
대한민국
info@kr.pepperl-fuchs.com
+82 2 34819494
© 2024 All Rights Reserved.
Pepperl+Fuchs는 세계 자동화 시장에서 전자기 센서 및 컴포넌트 제조 및 개발의 선두주자입니다. 지속적인 혁신, 오래토록 변치 않는 품질 및 꾸준한 성장이 지난 70년 동안 계속적인 성장을 보장하였습니다. Pepperl+Fuchs의 전세계에 6,300명의 임직원을 보유하고 있으며, 독일, USA, 싱가포르, 헝가리, 인도네시아 및 베트남에 제조 시설을 가지고 있으며, 대부분 ISO9001을 획득하였습니다.