Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
PDF 파일로 된 데이타 시트 다운로드:
제품 설명 |
---|
Combination sensor for opening and protection |
General specifications | ||
---|---|---|
Detection field | AIR, adjustable , total field: 2400 mm x 1000 mm (WxD) for a mounting height of 2200 mm | |
Detection field | Radar sensor 2500 mm x 4000 mm (d x w) at installation height of 2200 mm and 45° angle | |
Detection range max. | 0 ... 3200 mm | |
Light source | 3 Series | |
Light type | modulated infrared light | |
Marking | CE | |
Setting angle | -8 ... 4 ° | |
Operating frequency | 24.15 ... 24.25 GHz K-Band , Radar sensor | |
Transmitter radiated power (EIRP) | < 20 dBm | |
Functional safety related parameters | ||
Performance level (PL) | PL d | |
Category | Cat. 2 | |
MTTFd | 339.83 a | |
Diagnostic Coverage (DC) | 81.52 % | |
Indicators/operating means | ||
Function indicator | LED green/blue/red/orange | |
Control elements | DIP switch | |
Control elements | sensitivity adjustment | |
Parameterization indicator | LED flashes when in adjustment mode Fast orange | |
Electrical specifications | ||
Operating voltage | 12 ... 24 V DC / 12 ... 24 V AC +/- 10%, 50 - 60 Hz | |
No-load supply current | ≤ 80 mA at 24 V DC ≤ 150 mA at 12 V: | |
Power consumption | 2.5 VA | |
Input | ||
Activation current | at 24 V DC 6 mA | |
Test input | active with +UB | |
Output 1 | ||
Output type | Infrared, optocoupler | |
Switching voltage | 48 V DC | |
Switching current | 7.5 mA resistive load | |
De-energized delay | 0.5 s | |
Switching type | light/dark on selectable programmable | |
Response time | 100 ms up to 200 ms | |
Output 2 | ||
Output type | Radar | |
Signal output | Frequency output | |
Output frequency | 100 Hz duty 1:1 | |
Switching voltage | 48 V DC | |
Switching current | 50 mA resistive load | |
De-energized delay | 1.5 s | |
Response time | 100 ms up to 200 ms | |
Conformity | ||
Functional safety | ISO 13849-1 | |
Product standard | EN 12978 | |
Approvals and certificates | ||
CE conformity | 2014/53/EU This device can be used in all countries within the European Union. In other countries, all applicable national regulations must be observed. | |
FCC approval | No - Use in North America is not permitted. | |
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Ambient conditions | ||
Operating temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Relative humidity | max. 80 % | |
Mechanical specifications | ||
Mounting height | max. 3200 mm | |
Degree of protection | IP54 (when mounted) | |
Connection | plug 8-pin , Connecting cable included with delivery | |
Material | ||
Housing | ABS | |
Mass | approx. 260 g | |
Dimensions | (W x H x D) 265 mm 60 mm 43 mm | |
Height | 60 mm | |
Width | 265 mm | |
Depth | 43 mm | |
Note | Please refer to the package insert for information on how to mount and install the sensor correctly. | |
General information | ||
Scope of delivery | sensor , cable , 2 screws , Mounting aid , Instruction leaflet | |
Suitable series | ||
Series | MotionScan |
System | Classcode |
---|---|
ECLASS 13.0 | 27274501 |
ECLASS 12.0 | 27280890 |
ECLASS 11.0 | 27280890 |
ECLASS 10.0.1 | 27280890 |
ECLASS 9.0 | 27280890 |
ECLASS 8.0 | 27280890 |
ECLASS 5.1 | 27270990 |
ETIM 9.0 | EC004807 |
ETIM 8.0 | EC000138 |
ETIM 7.0 | EC000138 |
ETIM 6.0 | EC000138 |
ETIM 5.0 | EC000138 |
UNSPSC 12.1 | 39121528 |
Accessories | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|