Inductive analog sensor IA6-12GM50-IU-Y70109008
- Inductive analog sensor
- Analog output 1 mA ... 5 mA/ 0 V ... 5 V
- 0...6 mm quasi flush
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
PDF 파일로 된 데이타 시트 다운로드:
데이타 시트 발췌: 기술 사양 IA6-12GM50-IU-Y70109008
| General specifications | ||
|---|---|---|
| Output type | Analog current output or analog voltage output | |
| Installation | quasi flush | |
| Output polarity | DC | |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 18 mm x 18 mm x 1 mm |
|
| Reduction factor rAl | 0.33 | |
| Reduction factor rCu | 0.28 | |
| Reduction factor r304 | 0.8 | |
| Reduction factor rBrass | 0.43 | |
| Measuring range | 0 ... 6 mm | |
| Output type | 4-wire | |
| Nominal ratings | ||
| Installation conditions | ||
| A | 2 mm | |
| B | 12 mm | |
| C | 18 mm | |
| F | 14 mm | |
| Operating voltage | 10 ... 30 V , residual ripple 20 % UB | |
| Limit frequency (3dB) | 1000 Hz | |
| Reverse polarity protection | yes | |
| Short-circuit protection | yes | |
| Repeat accuracy | ± 0.32 mm | |
| Resolution | 0 ... 1 µm | |
| No-load supply current | ≤ 10 mA | |
| Functional safety related parameters | ||
| MTTFd | 551 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Analog output | ||
| Output type | 0 ... 5 V / 1 ... 5 mA | |
| Load resistor | Current output A2: 1 kΩ (UB=10V) / 5 kΩ (UB=30V) | |
| Load current | Voltage output A1: ≤ 10 mA | |
| Recovery time | 20 ms | |
| Adjustment tolerance zero point | ≤ ± 10 % of full-scale value | |
| Temperature drift | ± 5 % (0 ... 70 °C) ± 10 % (-25 ... 0 °C) |
|
| Residual ripple | 20 % | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN IEC 60947-5-2 | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | cable PUR 2 m | |
| Housing material | chromium plated brass | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Mass | 27 g | |
| Dimensions | ||
| Length | 50 mm | |
| Diameter | 12 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details: IA6-12GM50-IU-Y70109008
Approvals: IA6-12GM50-IU-Y70109008
| Certificates | 인증서 번호 | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | E87056 | ALL | 451 KB | |
| China Information on CCC | CCC-Exempt Declaration (Pepperl+Fuchs) | ALL | 457 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-4776A | ALL | 1215 KB | |
관련문서: IA6-12GM50-IU-Y70109008
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.
페펄앤드푹스코리아(주)
서울특별시 서초구 서초대로88
6층 (유니온빌딩)
06673 대한민국
대한민국
info@kr.pepperl-fuchs.com
+82 2 34819494
Pepperl+Fuchs는 세계 자동화 시장에서 전자기 센서 및 컴포넌트 제조 및 개발의 선두주자입니다. 지속적인 혁신, 오래토록 변치 않는 품질 및 꾸준한 성장이 지난 70년 동안 계속적인 성장을 보장하였습니다. Pepperl+Fuchs의 전세계에 6,300명의 임직원을 보유하고 있으며, 독일, USA, 싱가포르, 헝가리, 인도네시아 및 베트남에 제조 시설을 가지고 있으며, 대부분 ISO9001을 획득하였습니다.