USi-industry evaluation unit USIS-F264-4E5-V19
- Evaluation unit for ultrasonic transducers with eliptic sound field
- Object detection in the near range
- Multiple device installation possible, no mutual interference (no cross-talk)
- Adjustable sound cone
- Temperature compensation
- Parameterizable input, e.g. for switching between two parameter sets
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
PDF 파일로 된 데이타 시트 다운로드:
데이타 시트 발췌: 기술 사양 USIS-F264-4E5-V19
| 제품 설명 |
|---|
| Evaluation unit for the ultrasonic sensor system USi-industry with switching outputs (stand-alone device/secondary device) |
| General specifications | ||
|---|---|---|
| Type | USi-industry evaluation unit | |
| Sensing range | 10 ... 2500 mm factory setting: 2000 mm |
|
| Adjustment range | 150 ... 2500 mm | |
| Dead band | 0 ... 10 mm | |
| Object size | typ. ∅ 10 mm | |
| Transducer frequency | approx. 103 kHz | |
| Response delay | 10 ... 20000 ms factory setting: 150 ms |
|
| Sensor cycle time | 10 ... 200 ms factory setting: 50 ms |
|
| Resolution | 1 mm | |
| Target velocity | axial (max.): typ. 2 m/s (up to 2.5 m/s) | |
| Repeat accuracy | ± 0.1 % of full-scale value | |
| Temperature influence | automatic or manual temperature compensation available , without temperature compensation: 0.17 %/K |
|
| Indicators/operating means | ||
| LED green | supply voltage/device status | |
| LED yellow | output states | |
| Button | Teach-in | |
| Electrical specifications | ||
| Operating voltage | 9 ... 30 V DC |
|
| No-load supply current | ≤ 160 mA | |
| Power consumption | < 2.5 W | |
| Time delay before availability | ≤ 300 ms | |
| Interface | ||
| Interface type | USB 2.0 | |
| Inputs | ||
| Input type | 2 inputs for ultrasonic transducers 1 digital input |
|
| Output 1 | ||
| Designation | OUT 1.1 | |
| Output type | switching output: PNP Normally open/closed (NO/NC) parameterizable |
|
| Voltage drop | ≤ 2.5 V | |
| Switching frequency | 0.05 Hz ... 100 Hz | |
| Off-state current | ≤ 100 µA | |
| Switching voltage | max. UB | |
| Switching current | 100 mA | |
| Output 2 | ||
| Designation | OUT 1.2 | |
| Output type | switching output: PNP Normally open/closed (NO/NC) parameterizable |
|
| Voltage drop | ≤ 2.5 V | |
| Switching frequency | 0.05 Hz ... 100 Hz | |
| Off-state current | ≤ 100 µA | |
| Switching voltage | max. UB | |
| Switching current | 100 mA | |
| Output 3 | ||
| Designation | OUT 2.1 | |
| Output type | switching output: PNP Normally open/closed (NO/NC) parameterizable |
|
| Voltage drop | ≤ 2.5 V | |
| Switching frequency | 0.05 Hz ... 100 Hz | |
| Off-state current | ≤ 100 µA | |
| Switching voltage | max. UB | |
| Switching current | 100 mA | |
| Output 4 | ||
| Designation | OUT 2.2 | |
| Output type | switching output: PNP Normally open/closed (NO/NC) parameterizable |
|
| Voltage drop | ≤ 2.5 V | |
| Switching frequency | 0.05 Hz ... 100 Hz | |
| Off-state current | ≤ 100 µA | |
| Switching voltage | max. UB | |
| Switching current | 100 mA | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 55011:2016-04 |
|
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector plug | |
| Degree of protection | IP65 | |
| Connection | for power supply and outputs: connector plug M12, 8-pin, connection line max. 30 m for ultrasonic transducer: for each socket M8, 3-pin for parameterization: socket Mini USB |
|
| Material | ||
| Housing | diecast aluminum | |
| Mass | 250 g | |
| Dimensions | ||
| Height | 35 mm | |
| Width | 77 mm | |
| Length | 98 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details: USIS-F264-4E5-V19
Informative Literature: USIS-F264-4E5-V19
| Literature | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|
| Product Information - Ultrasonic Sensor Systems USi®-industry and USi®-safety | ENG | 1781 KB | |
| Application Report | ENG | 347 KB | |
| Application Report | ENG | 333 KB |
Product Documentation: USIS-F264-4E5-V19
| Manuals | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|
| Manual USi-industry USI*-F264-*-V19 | ENG | 2461 KB |
Approvals: USIS-F264-4E5-V19
| Certificates | 인증서 번호 | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | E87056, Vol.1, Sec.65 | ALL | 285 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F) | DOC-7654 | ALL | 69 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitätserklärung (P+F) | DOC-7655 | ALL | 67 KB | |
Software: USIS-F264-4E5-V19
| Device Description Files/Drivers | Release Info | 파일 타입 | 파일 크기 |
|---|---|---|---|
| DTM for USI*-F264-* / DTM für USI*-F264-* | V1.0.0.3 / 2024-10-08 | ZIP | 22284 KB |
| Software Tools | |||
| PACTware 6.X / PACTware 6.X | 6.1 | ZIP | 335938 KB |
관련문서: USIS-F264-4E5-V19
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
|
||||||
The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas.
페펄앤드푹스코리아(주)
서울특별시 서초구 서초대로88
6층 (유니온빌딩)
06673 대한민국
대한민국
info@kr.pepperl-fuchs.com
+82 2 34819494
© 2024 All Rights Reserved.
Pepperl+Fuchs는 세계 자동화 시장에서 전자기 센서 및 컴포넌트 제조 및 개발의 선두주자입니다. 지속적인 혁신, 오래토록 변치 않는 품질 및 꾸준한 성장이 지난 70년 동안 계속적인 성장을 보장하였습니다. Pepperl+Fuchs의 전세계에 6,300명의 임직원을 보유하고 있으며, 독일, USA, 싱가포르, 헝가리, 인도네시아 및 베트남에 제조 시설을 가지고 있으며, 대부분 ISO9001을 획득하였습니다.