당사 전문가진이 여러분의 기술, 제품 또는 어플리케이션 관련 질문에 영업일 기준 3일 이내에 답해드립니다.
질문서를 제출하기 전에 모든 필드를 기재하십시오. Pepperl+Fuchs는 여러분의 프라이버시를 존중합니다. 당사 프라이버시 정책을 읽어보시기 바랍니다.
* Pepperl+Fuchs는 여러분에게 도움이 되고 적합한 답을 제공하기 위해 만반의 노력을 하고 있습니다. 여러분의 질문은 영업일 기준 3일 이내에 처리됩니다. 간혹 답변이 지연되는 경우도 있습니다. 이 경우 당사는 여러분의 질문을 조사하고 동료들과 협의하거나 다른 Pepperl+Fuchs 사업장에 여러분의 질문을 전파하는 중입니다. 질문 처리 상태에 관해 전자우편으로 통지해 드립니다.
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
데이타 시트 발췌: 기술 사양
UC2000-30GM-IU-V1
| General specifications |
| Sensing range | 200 ... 2000 mm |
| Dead band | 0 ... 200 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 175 kHz |
| Response delay | ≤ 100 ms |
| Indicators/operating means |
| LED yellow | solid yellow: object in the evaluation range
yellow, flashing: program function evaluation limits, slope |
| LED red/green | solid green: Power on green, flashing: program function, object detected solid red: Connector removed red, flashing: error, program function object not detected |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
| Power consumption | ≤ 800 mW |
| Output |
| Output type | 1 current output 4 ... 20 mA
1 voltage output 0 ... 10 V |
| Resolution | depending on the set evaluation range:
0.172 mm , if evaluation range < 705 mm ,
evaluation range [mm] / 4096, if evaluation range > 705 mm |
| Deviation of the characteristic curve | ≤ 0.2 % of full-scale value |
| Repeat accuracy | ≤ 0.1 % of full-scale value |
| Load impedance | current output: ≤ 500 Ohm
Voltage output: ≥ 1000 Ohm |
| Temperature influence | < 2 % of full-scale value (≤ 0.2 % / K without temperature compensation) |
| Standard conformity |
| Standards | EN 60947-5-2 |
| Ambient conditions |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
| Connection type | Connector M12 x 1 , 4-pin |
| Degree of protection | IP65 |
| Material | |
| Housing | High grade stainless steel |
| Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| Mass | 175 g |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details:
UC2000-30GM-IU-V1
Design / Simulation:
UC2000-30GM-IU-V1
관련문서:
UC2000-30GM-IU-V1
| Accessories |
|
|
|
| Mounting flange, 30 mmfa |
|
|
|
|
| Female cordset single-ended M12 straight A-coded, 4-pin, PVC cable greyfa |
|
|
|
|
| Plastic mounting adapter, 30 mmfa |
|
|
|
|
| Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa |
|
|
|
|
| Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa |
|
|
|
|
| Ultrasonic -deflector, Universal mounting possibilities, 90° sound deflection for difficult installation circumstances, Focussing effectfa |
|
|
|
|
| Ultrasonic -deflector, Clamp mounting, 90° sound deflection for difficult installation circumstances, Universal Orientationfa |
|
|
|
|
| Plastic nuts with centering ring for the vibration-free mounting of cylindrical sensors, For insulated mountingfa |
|
|
|
|
| fa |
|
+82 2 34819494