Adapter plate MHV-BT-F25/F31

Simple mounting
All-in-one stainless steel solution
Minimal friction due to ball bearing
Conforming to standards

Technical Data
Product Documentation
Design / Simulation
관련문서
전문가 상담

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

PDF 파일로 된 데이타 시트 다운로드:

데이타 시트 발췌: 기술 사양 MHV-BT-F25/F31

제품 설명
Adapter plate for dual sensors -F25/-F31 series

General specifications
Suitable sensors and		Dual sensors, -F25 series with actuator BT32... Dual sensors, -F25K series with actuator BT32... Dual sensors, -F31 series with actuator BT65...
Standard conformity
Standards		VDI / VDE 3845 DIN EN ISO 5211
Mechanical specifications
Shaft diameter		16 mm
Shaft height		20 mm
Mounting hole pattern		sensor: 30 x 80 mm, M5 screw mounting bracket: 4 x 50 mm, M6 screw
Material		stainless steel 1.4301 / AISI 304 for plates and sheet metal bending parts Stainless steel 1.4305 / AISI 303 for shaft
	Mounting materials	stainless steel socket cap head screws 4 x M6 x 8 mm
Mass		300 g
Dimensions
	Height	53.5 mm
	Width	65 mm
	Length	101.5 mm

Classifications

System	Classcode
ECLASS 13.0	27273701
ECLASS 12.0	27273701
ECLASS 11.0	27273792
ECLASS 10.0.1	27273792
ECLASS 9.0	27273792
ECLASS 8.0	27279202
ECLASS 5.1	27279202
ETIM 9.0	EC003015
ETIM 8.0	EC003015
ETIM 7.0	EC003015
ETIM 6.0	EC003015
ETIM 5.0	EC003015
UNSPSC 12.1	31162301

Details: MHV-BT-F25/F31

Product Documentation: MHV-BT-F25/F31

Brief Instructions	언어	파일 타입	파일 크기
Brief Instructions - Assembly of Fitting, Adapter Plate, Mounting Set, Double Sensor, Actuator	ENG	PDF	272 KB

Design / Simulation: MHV-BT-F25/F31

CAD	언어	파일 타입	파일 크기
CAD 3-D / CAD 3-D	ALL	STP	1416 KB
CAD Portal / CAD Portal	ALL	LINK	---

관련문서: MHV-BT-F25/F31

Accessory of

	WS-VAL-4ZL-F406-B41-01-02 Wireless sensor node
	Battery operated, Data transfer via LoRaWAN, LoRaWAN downlink channel for querying and adjusting parameter values, Frequency range: 863 ... 870 MHz (Europe) fa

Matching System Components

	MHV-BT-F10 Mounting Kit
	fa

	MHV-BT-F12-M10 Mounting Kit
	fa

	MHV-BT-F07-G17 Mounting Kit
	fa

	MHV-BT-F05 Mounting Kit
	fa

	MHV-BT-F0304 Mounting Kit
	fa

	MHV-BT-F03F04-M5 Mounting Kit
	fa

	MHV-BT-F03F04-M6 Mounting Kit
	fa

	MHV-BT-F05-M5 Mounting Kit
	fa

	MHV-BT-F05-M6 Mounting Kit
	fa

	MHV-BT-F07-M5 Mounting Kit
	fa

	MHV-BT-F07-M6 Mounting Kit
	fa

	MHV-BT-F07-M8 Mounting Kit
	fa

	MHV-BT-F10-M8 Mounting Kit
	fa

	MHV-BT-F10-M10 Mounting Kit
	fa

	MHV-BT-F10-M12 Mounting Kit
	fa

	MHV-BT-F07 Mounting Kit
	fa

	MHV-BT-F05-G14 Mounting Kit
	fa

	MHV-BT-F0304-G11 Mounting Kit
	fa

	MHV-BT-F10-G22 Mounting Kit
	fa

	MHV-BT-F0304-G09 Mounting Kit
	fa

	MHV-WS-F406-F05-M5 Mounting bracket
	Material: stainless steel 1.4301 / AISI 304fa

	MHV-BT-F12 Mounting Kit
	fa

Matching System Components

	NBN4-F25-E8-V1 Inductive sensor
	Valve position detection, Switching function: 2 x normally open (NO), Output type: PNP, Installation: flush mountable, Output polarity: DC, Output type: 3-wire, Construction type: Dual sensor, Series: Dual sensor, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Housing material: PBT, Degree of protection: IP67fa

	BT32-F25-0 Mounting Kit
	fa

	BT65A Activator
	fa

	NCN3-F25-N4-5M Inductive sensor
	Extended temperature range, Valve position detection, Suitable for 2:1 technology, Switching function: 2 x normally closed (NC), Output type: NAMUR, Installation: flush mountable, Output type: 2-wire, Construction type: Dual sensor, Series: Dual sensor, Suitable for 2:1 technology, Type of voltage: DC, Equipment protection level Ga: IECEx TUN 17.0021X, Equipment protection level Gb: IECEx TUN 17.0021X, Equipment protection level Da: IECEx TUN 17.0021X, Equipment protection level Mb: IECEx TUN 17.0021Xfa

	NBN4-F25K-2Z4L Inductive sensor
	Valve position detection, Switching function: 2 x normally open (NO), Output type: Two-wire with minimum off-state current, Installation: flush mountable, Output polarity: DC, Output type: 2x 2-wire, Construction type: Dual sensor, Series: Dual sensor, Operating voltage: 5 ... 30 V DC, Type of voltage: DC, Connection (system side): screw terminal , M20 x 1.5 cable gland, Housing material: PBT, Degree of protection: IP67fa

	NCN3-F31-N4-V1 Inductive sensor
	Extended temperature range, Valve position detection, Suitable for 2:1 technology, Switching function: 2 x normally closed (NC), Output type: NAMUR, Installation: flush mountable, Output type: 2-wire, Construction type: Dual sensor, Series: Dual sensor, Suitable for 2:1 technology, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Ga: IECEx TUN 17.0021X, Equipment protection level Gb: IECEx TUN 17.0021X, Equipment protection level Da: IECEx TUN 17.0021Xfa

	NCN3-F31-N4-K Inductive sensor
	Extended temperature range, Valve position detection, Suitable for 2:1 technology, Switching function: 2 x normally closed (NC), Output type: NAMUR, Installation: flush mountable, Output type: 2-wire, Construction type: Dual sensor, Series: Dual sensor, Suitable for 2:1 technology, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Ga: IECEx TUN 17.0021X, Equipment protection level Gb: IECEx TUN 17.0021X, Equipment protection level Da: IECEx TUN 17.0021Xfa

	BT32XAS Activator
	fa

	BT65B Activator
	fa

	BT65X Activator
	fa

General Notes Relating to Pepperl+Fuchs Product Information

페펄앤드푹스코리아(주)
서울특별시 서초구 서초대로88
6층 (유니온빌딩)
06673 대한민국
대한민국
info@kr.pepperl-fuchs.com
phone +82 2 34819494

Pepperl+Fuchs는 세계 자동화 시장에서 전자기 센서 및 컴포넌트 제조 및 개발의 선두주자입니다. 지속적인 혁신, 오래토록 변치 않는 품질 및 꾸준한 성장이 지난 70년 동안 계속적인 성장을 보장하였습니다. Pepperl+Fuchs의 전세계에 6,300명의 임직원을 보유하고 있으며, 독일, USA, 싱가포르, 헝가리, 인도네시아 및 베트남에 제조 시설을 가지고 있으며, 대부분 ISO9001을 획득하였습니다.