Power Supply PS1000-A6-24.20

100 V AC to 240 V AC wide-range input
Output 24 V DC, 20 A, 480 W, 1-phase
Housing width 48 mm
Efficiency up to 95.6 %
Minimal inrush current surge
DC OK relay contact
Current sharing for parallel use
Suitable for Zone 2/Div. 2 mounting

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
관련문서
전문가 상담

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

PDF 파일로 된 데이타 시트 다운로드:

데이타 시트 발췌: 기술 사양 PS1000-A6-24.20

Electrical specifications
Efficiency		94.2 % at 120 V AC 95.6 % at 230 V AC
Power dissipation		29.6 W at 120 V AC 22.1 W at 230 V AC
Input
Voltage range		100 ... 240 V AC (-15 %/+10 %), 50 ... 60 Hz (±6 %) 110 ... 150 V DC (±20 %)
Current		4.26 A at 120 V AC 2.23 A at 230 V AC 4.64 A at 110 V DC for lower output currents see technical information
Inrush current		10 A peak at 120 V AC, temperature independent 4.5 A peak at 230 V AC, temperature independent
Capacity factor		0.99 at 120 V AC 0.98 at 230 V AC
Output
Rated voltage		24 V DC
Voltage range		24 ... 28 V DC factory setting: 24.1 V
Rated current		20 A
Current		24 ... 20.6 A at ambient temperature < 45 °C (113 °F) 20 ... 17.1 A at ambient temperature 60 °C (140 °F) 15 ... 13 A at ambient temperature 70 °C (158 °F) linear power derating see technical information
Power		480 W
Ripple		max. 50 mV _pp
Hold-up time		32 ms at 120 V AC 32 ms at 230 V AC
Overload behavior		continuous current : output voltage > 13 V DC intermittent current : output voltage < 13 V DC
Short-circuit current		typ. 29 A intermitted current peak value for typ. 2 s
Voltage limitation		typ. 30.5 V DC max. 32 V DC
Fault indication output
Connection		terminals 13, 14
Output type		relay contact DC OK - contact is closed if the output voltage is > 90 % of the adjusted output voltage
Contact loading		max. 60 V DC/0.3 A ; 30 V DC/1 A ; 30 V AC/0.5 A resistive load min. 1 mA at 5 V DC
Galvanic isolation
Input/Output		SELV/PELV
Indicators/settings
Display elements		LED green: status DC OK - LED lights up if the output voltage is > 90 % of the adjusted output voltage
Control elements		potentiometer , plug-in jumper
Configuration		setting of the output voltage via potentiometer setting of the operating mode - plug-in jumper plugged in: "parallel use" operating mode - plug-in jumper not plugged in: "single use" operating mode
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	IEC/EN 61000-6-1 , IEC/EN 61000-6-2 , IEC/EN 61000-6-3 , IEC/EN 61000-6-4 , IEC/EN 61000-3-2 , IEC/EN 61000-3-3
Low voltage
	Directive 2014/35/EU	EN 61010-1
RoHS
	Directive 2011/65/EU (RoHS)	IEC/EN 63000:2019
Conformity
Degree of protection		EN 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F) , see technical information
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		5 ... 95 %, noncondensing
Shock resistance		20 g , 11 ms or 30 g , 6 ms
Vibration resistance		2 ... 17.8 Hz : ± 1.6 mm , 17.8 ... 500 Hz : 2 g
Corrosion resistance		IEC 60068-2-60, Method 4 ISA-71.04, severity level G3
Mechanical specifications
Housing material		aluminum alloy , galvanized steel
Degree of protection		IP20
Connection
	Input/Output	screw terminals conductor cross section: max. 6 mm² (AWG 20-10) cable diameter: max. 2.8 mm, wire end ferrules included stripped insulation length: 7 mm tightening torque: max. 1 Nm
	Relay contact output	spring terminals with push-in connection technology conductor cross section: max. 1.5 mm² (AWG 24-16) cable diameter: max. 1.6 mm, wire end ferrules included stripped insulation length: 7 mm
Mass		approx. 830 g
Dimensions		48 x 124 x 127 mm , without plugs and without DIN mounting rail
	Height	124 mm
	Width	48 mm
	Depth	127 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
ATEX approval
	ATEX certificate	EPS 17 ATEX 1 089 X
	ATEX marking	II 3G Ex ec nC II T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-15:2010
International approvals
UL approval		E350173 , E223176
IECEx approval
	IECEx certificate	IECEx EPS 20.0056X
	IECEx marking	Ex ec nC IIC T4 Gc
	Standards	IEC 60079-0:2011 , IEC 60079-7:2015 , IEC 60079-15:2010
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27040790
ECLASS 12.0	27040790
ECLASS 11.0	27040790
ECLASS 10.0.1	27040790
ECLASS 9.0	27040790
ECLASS 8.0	27049090
ECLASS 5.1	27049090
ETIM 9.0	EC002542
ETIM 8.0	EC002542
ETIM 7.0	EC002542
ETIM 6.0	EC002542
ETIM 5.0	EC002542
UNSPSC 12.1	39121004

Details: PS1000-A6-24.20

Informative Literature: PS1000-A6-24.20

Literature	언어	파일 타입	파일 크기
Product Information - PS1000 for Global Use up to Zone 2/Div. 2	ENG	PDF	577 KB

Product Documentation: PS1000-A6-24.20

Product information	언어	파일 타입	파일 크기
Technical information	ENG	PDF	4577 KB
Safety and Security Documentation
Instruction manual / Betriebsanleitung	ALL	PDF	243 KB
Instruction manual / Betriebsanleitung	ALL	PDF	307 KB

Design / Simulation: PS1000-A6-24.20

CAD	언어	파일 타입	파일 크기
CAD 3-D / CAD 3-D	ALL	STP	6363 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	200 KB

Approvals: PS1000-A6-24.20

Certificates	인증서 번호	언어	파일 타입	파일 크기
Bureau Veritas IECEx Certificate of Conformity	IECEx EPS 20.0056X	ALL	LINK	---
Canada US UL	UL E350173 (NRAD/NRAD7)	ALL	PDF	83 KB
Europe Bureau Veritas ATEX Category 3 G	EPS 17 ATEX 1 089X	ALL	PDF	1041 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-4789	ALL	PDF	73 KB
EU Declaration of Conformity (P+F)	TDOC-4789AENG	ENG	PDF	185 KB