Temperature head transmitter HUT
- 2-, 3- and 4-wire technology, 4 mA ... 20 mA analog output
- High accuracy in total ambient temperature range
- Universally PC programmable for various signals
- Fault signal on sensor break or short circuit, presettable to NAMUR NE43
- Online configuration during measurement using SETUP connector
- Customer specific linearization
- EMC acc. to NAMUR NE 21
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
PDF 파일로 된 데이타 시트 다운로드:
데이타 시트 발췌: 기술 사양 HUT
| Supply | ||
|---|---|---|
| Connection | terminals 1, 2 | |
| Rated voltage | 8 ... 35 V DC 8 ... 30 V DC for hazardous area |
|
| Input | ||
| Sensor types | resistance thermometer (RTD): - Pt100, Pt500, Pt1000 acc. to IEC 751 and Ni100, Ni500, Ni1000 acc. to DIN 43760 resistance transmitter (Ω) thermocouple (TC): - B (PtRh30-PtRh6), C (W5Re-W26Re), D (W3Re-W25Re), E (NiCr-CuNi), J (Fe-CuNi), K (NiCr-Ni), L (Fe-CuNi), N (NiCrSi-NiSi), R (PtRh13-Pt), S (PtRh10-Pt), T (Cu-CuNi), U (Cu-CuNi), MoRe5-MoRe41 acc. to IEC 584, part 1 voltage transmitter (mV) |
|
| Connection | resistance thermometer (RTD): - 2-wire connection: terminals 3, 6 - 3-wire connection: terminals 3, 5, 6 - 4-wire connection: terminals 3, 4, 5, 6 resistance transmitter (Ω): - 2-wire connection: terminals 3, 6 - 3-wire connection: terminals 3, 5, 6 - 4-wire connection: terminals 3, 4, 5, 6 thermocouple (TC): terminals 4, 6 |
|
| Cold junction compensation | internal (Pt100) or external (0 ... 80 °C (273 ... 353 K)), accuracy ± 1 K | |
| Lead resistance | resistance thermometer (RTD): max. 11 Ω per line | |
| Current | resistance thermometer (RTD): sensor current ≤ 0.6 mA thermocouple (TC): sensor current 30 mA |
|
| Output | ||
| Connection | terminals 1, 2 | |
| Current limit | ≤ 25 mA | |
| Load | (Vs - 8)/0.025 A | |
| Switch-on delay | 4 s , during power up Ia = 3.8 mA | |
| Output signal | 4 ... 20 mA, 20 ... 4 mA temperature linear, resistance linear, voltage linear | |
| Residual ripple | Upp ≤ 5 V at Ub ≥ 13 V, fmax = 1 kHz | |
| Response time | 1 s | |
| Self current consumption | max. 3.5 mA | |
| Signal on alarm | measuring range undercut: linear drop to 3.8 mA exceeding measuring range: linear rise to 20.5 mA sensor breakage, sensor short circuit: ≤ 3.6 mA oder ≥ 21.0 mA can be set up |
|
| Galvanic isolation | ||
| Input/Output | safe galvanic isolation acc. to EN 50020, 3.75 kV AC | |
| Measurement accuracy | ||
| Reference operating conditions | calibration temperature 23 °C (296 K) ± 5 K | |
| Maximum measured error | resistance thermometer (RTD): 0.2 ... 0.5 K or 0.08 ... 0.2 % resistance transmitter (Ω): ± 0.1 ... 1.5 Ω or 0.08 ... 0.12 % thermocouple (TC): typ. 0.5 ... 2.0 K or 0.08 % voltage transmitter: ± 20 µV or 0.08 % |
|
| Operating conditions | ||
| Ambient conditions | ||
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) , for hazardous area see certificate | |
| Storage temperature | -40 ... 100 °C (-40 ... 212 °F) | |
| Vibration resistance | 4 g/2 ... 150 Hz | |
| Relative humidity | moisture condensation allowable | |
| Mechanical specifications | ||
| Degree of protection | IP00/IP66 installed | |
| Connection | Terminals for wires max. 1.75 mm 2, undetachable screws | |
| Material | housing: PC potting: PUR |
|
| Mass | approx. 40 g | |
| Dimensions | ∅44 x 22,5 mm (1.7 x 0.9 inch) | |
| Mechanical construction | ||
| Construction type | connection head acc. to DIN 43729 form B, field housing | |
| Indication and operation | ||
| Configuration | via PC operating software, configuration set TXU 10L interface: PC interface connection cable TTL-/-RS 232 with plug |
|
| Certificates and approvals | ||
| Explosion-hazardous area | ZELM 07 ATEX 0352 X , for additional certificates see www.pepperl-fuchs.com | |
| Type of protection |  II 1G Ex ia IIC T6/T5/T4 |
|
| General information | ||
| Directive conformity | ||
| Directive 2004/108/EC (EMC) | emitted interference and noise immunity to EN 61326-1:2006 and EN 61326-2-3:2006 | |
| Directive 94/9/EC (ATEX) | EN 60079-0:2006, EN 60079-11:2007, EN 60079-26:2007 | |
| Conformity | ||
| Electromagnetic compatibility | NE 21 | |
| Degree of protection | EN 60529 | |
| Climate class | EN 60654, class C | |
| Vibration resistance | EN 60068-2-6 | |
| Supplementary documentation | technical information TI070O operating instructions KA141O safety information SI085O (ZELM 07 ATEX 0352 X) |
|
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27200591 |
| ECLASS 12.0 | 27200591 |
| ECLASS 11.0 | 27200591 |
| ECLASS 10.0.1 | 27200591 |
| ECLASS 9.0 | 27200591 |
| ECLASS 8.0 | 27200591 |
| ECLASS 5.1 | 27200591 |
| ETIM 9.0 | EC001447 |
| ETIM 8.0 | EC001447 |
| ETIM 7.0 | EC001447 |
| ETIM 6.0 | EC001447 |
| ETIM 5.0 | EC001447 |
| UNSPSC 12.1 | 41111950 |
Details: HUT
Product Documentation: HUT
| Brief Instructions | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|
| KA141O, brief instructions HUT-Ex / KA141O, Kurzanleitung HUT-Ex | ALL | 334 KB | |
| Safety and Security Documentation | |||
| Instruction manual SI085O, HUT-Ex / Betriebsanleitung SI085O, HUT-Ex | ALL | 732 KB | |
Approvals: HUT
| Certificates | 인증서 번호 | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|---|
| Europe ZELM ATEX Category 1 G | ZELM 07 ATEX 0352 X | ALL | 1163 KB |
페펄앤드푹스코리아(주)
서울특별시 서초구 서초대로88
6층 (유니온빌딩)
06673 대한민국
대한민국
info@kr.pepperl-fuchs.com
+82 2 34819494
© 2024 All Rights Reserved.
Pepperl+Fuchs는 세계 자동화 시장에서 전자기 센서 및 컴포넌트 제조 및 개발의 선두주자입니다. 지속적인 혁신, 오래토록 변치 않는 품질 및 꾸준한 성장이 지난 70년 동안 계속적인 성장을 보장하였습니다. Pepperl+Fuchs의 전세계에 6,300명의 임직원을 보유하고 있으며, 독일, USA, 싱가포르, 헝가리, 인도네시아 및 베트남에 제조 시설을 가지고 있으며, 대부분 ISO9001을 획득하였습니다.