Print mark contrast sensor DK12-11/9s20/124/136

Diffuse mode sensor for recording any print mark
Teach-in, static and dynamic
50 µs response time, suitable for extremely rapid scanning processes
3 emitter colors: green, red and blue

Technical Data
Product Documentation
Design / Simulation
Approvals
관련문서
전문가 상담

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

PDF 파일로 된 데이타 시트 다운로드:

데이타 시트 발췌: 기술 사양 DK12-11/9s20/124/136

제품 설명
Print mark contrast sensor

General specifications
Sensor range		11 mm ± 2 mm
Light source		3 LEDs (R,G,B)
Light type		Visible green/red/blue, modulated light
Light spot representation		1 mm x 3 mm , light spot parallel to housing
Angle deviation		max. ± 3°
Teach-in		static and dynamic Teach-In
Functional safety related parameters
MTTF_d		730 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		60 %
Indicators/operating means
Operation indicator		LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
Function indicator		2 LEDs yellow, light up in case of detection
Teach-in indicator		Teach-In mark: LED green/yellow equiphase flashing; 2,5 Hz . Teach-In background: LED green/yellow non equiphase flashing; 2,5 Hz . Teach-In dynamic: LED green/yellow equiphase flashing; 1.0 Hz . Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz .
Control elements		Teach-In rotary switch for Switching operation, Teach-In mark, Teach-In background and dynamic Teach-In
Electrical specifications
Operating voltage		10 ... 30 V DC
Ripple		10 %
No-load supply current		≤ 80 mA
Input
Function input		Ext. Teach-In input (ET)
Output
Switching type		light/dark on
Signal output		2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA
Switching frequency		10 kHz
Response time		50 µs
Timer function		Impulsed time element off-delay 20 ms
Compliance with standards and directives
Standard conformity
	Product standard	EN 60947-5-2:2007
Approvals and certificates
Protection class		II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
UL approval		cULus Listed , Class 2 power source
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 75 °C (-40 ... 167 °F)
Mechanical specifications
Degree of protection		IP67
Connection		Metal connector, M12, 5-pin, 90° rotatable
Material
	Housing	Frame: nickel plated, die cast zinc, Laterals: glass-fiber reinforced plastic PC
	Optical face	Plastic pane
Mass		60 g
Dimensions
	Height	49 mm
	Width	41.5 mm
	Depth	15 mm

Classifications

System	Classcode
ECLASS 13.0	27270906
ECLASS 12.0	27270906
ECLASS 11.0	27270906
ECLASS 10.0.1	27270906
ECLASS 9.0	27270906
ECLASS 8.0	27270906
ECLASS 5.1	27270906
ETIM 9.0	EC001820
ETIM 8.0	EC001820
ETIM 7.0	EC001820
ETIM 6.0	EC001820
ETIM 5.0	EC001820
UNSPSC 12.1	39121528

Details: DK12-11/9s20/124/136

Product Documentation: DK12-11/9s20/124/136

Brief Instructions	언어	파일 타입	파일 크기
Instruction leaflet / Beipackzettel	ALL	PDF	341 KB

Design / Simulation: DK12-11/9s20/124/136

CAD	언어	파일 타입	파일 크기
CAD 3-D / CAD 3-D	ALL	STP	200 KB

Approvals: DK12-11/9s20/124/136

Certificates	인증서 번호	언어	파일 타입	파일 크기
Canada USA UL Ordinary Location	UL-CA-L87056-31-50114002-0 / UL-US-L87056-11-50114002-0	ALL	PDF	546 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-1797B	ALL	PDF	184 KB