Print mark luminescence scanner DK50-UV-190/115b/147

Detect fluorescent chalk marks, clear glue, tamper-proof seals and other marks that regular contrast sensors cannot
Detect marks on irregular backgrounds
Sense invisible or nearly invisible marks
Compact, space-saving construction
Integral timer available
Differentiate degrees of luminescent contrast
Automatic or incremental teach

Technical Data
Informative Literature
Product Documentation
Design / Simulation
관련문서
전문가 상담

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

PDF 파일로 된 데이타 시트 다운로드:

데이타 시트 발췌: 기술 사양 DK50-UV-190/115b/147

제품 설명
Print mark luminescence scanner, detection range: 190 mm, UV light, light/dark on, Teach-In, timer function, NPN output, PNP output, cable with M12 plug

General specifications
Detection range		0 ... 190 mm
Light source		LED
Light type		modulated UV light
Light spot representation		2.2 mm at 25.4 mm sensor range
Teach-in		Incremental or automatic
Indicators/operating means
Operation indicator		LED green, 15 ms off delay timer LED green (x8), for contrast level indication
Function indicator		LED red, lights up with receiver lit
Teach-in indicator		Automatic Teach-In: green contrast LEDs turn on and off once from levels 1 through 8 then level 8 LED flashes twice Incremental Teach-In: green contrast level LED position may change
Control elements		Push buttons for automatic or incremental Teach-In, L.O./D.O. mode, and/or off-delay timer
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		50 mA
Output
Switching type		light on / dark on
Signal output		1 PNP and 1 NPN short-circuit protected, reverse polarity protected
Switching voltage		max. 30 V DC
Switching current		150 mA
Switching frequency		2.5 kHz
Response time		200 µs
Approvals and certificates
UL approval		cULus
Approvals		CE, cULus
Ambient conditions
Ambient temperature		-15 ... 70 °C (5 ... 158 °F)
Storage temperature		-15 ... 70 °C (5 ... 158 °F)
Mechanical specifications
Degree of protection		IP67
Connection		152.4 mm fixed cable with 5-pin, M12 x 1 connector
Material
	Housing	Polycarbonate
	Optical face	Acrylic
Mass		91 g
Dimensions
	Height	64.9 mm
	Width	22.9 mm
	Depth	56 mm

Classifications

System	Classcode
ECLASS 13.0	27270908
ECLASS 12.0	27270908
ECLASS 11.0	27270908
ECLASS 10.0.1	27270908
ECLASS 9.0	27270908
ECLASS 8.0	27270908
ECLASS 5.1	27270908
ETIM 9.0	EC001822
ETIM 8.0	EC001822
ETIM 7.0	EC001822
ETIM 6.0	EC001822
ETIM 5.0	EC001822
UNSPSC 12.1	39121528

Details: DK50-UV-190/115b/147

Informative Literature: DK50-UV-190/115b/147

We are sorry, there are no documents for your language selection. Please select another language.

Product Documentation: DK50-UV-190/115b/147

Brief Instructions	언어	파일 타입	파일 크기
Instruction leaflet / Beipackzettel	ALL	PDF	446 KB

Design / Simulation: DK50-UV-190/115b/147

CAD	언어	파일 타입	파일 크기
CAD 3-D / CAD 3-D	ALL	STP	119 KB
CAD Portal / CAD Portal	ALL	LINK	---

관련문서: DK50-UV-190/115b/147

Accessories

	V15-G-2M-PUR Female cordset
	Female cordset single-ended M12 straight A-coded, 5-pin, PUR cable greyfa

	OMH-DK50 Photoelectric Sensors, Mounting Bracket
	Right-Angled Mounting Bracketfa

General Notes Relating to Pepperl+Fuchs Product Information

페펄앤드푹스코리아(주)
서울특별시 서초구 서초대로88
6층 (유니온빌딩)
06673 대한민국
대한민국
info@kr.pepperl-fuchs.com
phone +82 2 34819494

Pepperl+Fuchs는 세계 자동화 시장에서 전자기 센서 및 컴포넌트 제조 및 개발의 선두주자입니다. 지속적인 혁신, 오래토록 변치 않는 품질 및 꾸준한 성장이 지난 70년 동안 계속적인 성장을 보장하였습니다. Pepperl+Fuchs의 전세계에 6,300명의 임직원을 보유하고 있으며, 독일, USA, 싱가포르, 헝가리, 인도네시아 및 베트남에 제조 시설을 가지고 있으며, 대부분 ISO9001을 획득하였습니다.