2-D LiDAR Sensor OMD10M-R2300-B23-V1V1D-1S
- High angle resolution
- Can be aligned using an integrated pilot laser
- Measuring method PRT (Pulse Ranging Technology)
- Compact design
- High pollution tolerance
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
PDF 파일로 된 데이타 시트 다운로드:
데이타 시트 발췌: 기술 사양 OMD10M-R2300-B23-V1V1D-1S
| 제품 설명 |
|---|
| R2300, 2-D LiDAR sensor for object detection and positioning, measuring range to object up to 10 m, Ethernet |
| General specifications | ||
|---|---|---|
| Measuring range | 0.2 ... 4 m (black 10%) 0.2 ... 10 m (white 90%) |
|
| Reference target | Kodak white (90%) | |
| Light source | laser diode | |
| Laser nominal ratings | ||
| Note | LASER RADIATION , DO NOT STARE INTO BEAM | |
| Laser class | 1 | |
| Wave length | Measuring laser infrared light 905 nm Pilot laser red light 650 nm |
|
| Beam divergence | Measuring laser: transversal 2 mrad , longitudinal 9.5 mrad Pilot laser: 0.3 mrad |
|
| Pulse length | Measuring laser: 5.2 ns Pilot laser: 1.1 µs |
|
| Repetition rate | 90 kHz | |
| max. pulse energy | Measuring laser: < 81 nJ Pilot laser: < 60 nJ |
|
| Measuring method | Pulse Ranging Technology (PRT) | |
| Scan rate | 100 s-1 50 s-1 |
|
| Scanning zone | 100° horizontal | |
| Diameter of the light spot | 25 mm x 100 mm at 10 m | |
| Filter | Maximum, average, median | |
| Ambient light limit | 60000 Lux |
|
| Resolution | 1 mm | |
| Functional safety related parameters | ||
| MTTFd | 75 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Data flow indicator | LED yellow: active ethernet LED green: Ethernet link |
|
| Function indicator | LED red: fault |
|
| Control elements | none | |
| Parameterization indicator | none | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V | |
| Ripple | 10 % within the supply tolerance | |
| No-load supply current | ≤ 300 mA / 24 V DC | |
| Power consumption | < 8 W | |
| Time delay before availability | < 20 s | |
| Interface | ||
| Interface type | Fast Ethernet | |
| Protocol | HTTP , UDP/IP | |
| Input/Output | ||
| Input/output type | none | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Laser safety | EN 60825-1:2014 | |
| Measurement accuracy | ||
| Measuring speed | 50000 measurements per second | |
| Measured value noise | typ. 30 mm , 1 sigma | |
| Angle resolution | 0.1 ° at 50 Hz | |
| Absolute accuracy | typ. ± 30 mm | |
| Repeat accuracy | < 12 mm | |
| Approvals and certificates | ||
| Protection class | III (operating voltage 50 V) | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -30 ... 50 °C (-22 ... 122 °F) | |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Relative humidity | 95 % , no moisture condensation | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Connection | 4-pin, M12x1 connector, standard (supply) , shield connected on both sides 4-pin, M12x1 socket, D-coded (LAN) |
|
| Material | ||
| Housing | ABS + PC | |
| Optical face | PC (Polycarbonate) | |
| Mass | approx. 0.27 kg | |
| Tightening torque, fastening screws | 1.5 Nm | |
| Dimensions | ||
| Height | 57 mm | |
| Width | 96 mm | |
| Length | 69 mm | |
| Number of mounting holes | 4 , max. thread depth 9 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270913 |
| ECLASS 12.0 | 27270913 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Details: OMD10M-R2300-B23-V1V1D-1S
Informative Literature: OMD10M-R2300-B23-V1V1D-1S
| Literature | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|
| Product Overview - LiDAR Sensors | ENG | 2253 KB | |
| Application Report - Reliable Load Detection during Transfer | ENG | 196 KB | |
| Application Report - Reliable Navigation of Autonomous Vehicles in Intralogistics | ENG | 174 KB |
Product Documentation: OMD10M-R2300-B23-V1V1D-1S
| Protocol Information | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|
| R2300 Ethernet Protocol Description / R2300 Ethernet Protokollbeschreibung | ALL | 4059 KB |
Approvals: OMD10M-R2300-B23-V1V1D-1S
| Declaration of Conformity | 인증서 번호 | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) | TDOC-4893DENG | ENG | 220 KB | |
| UK Declaration of Conformity (P+F) | TDOC-6953AENG | ENG | 194 KB |
관련문서: OMD10M-R2300-B23-V1V1D-1S
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
페펄앤드푹스코리아(주)
서울특별시 서초구 서초대로88
6층 (유니온빌딩)
06673 대한민국
대한민국
info@kr.pepperl-fuchs.com
+82 2 34819494
© 2024 All Rights Reserved.
Pepperl+Fuchs는 세계 자동화 시장에서 전자기 센서 및 컴포넌트 제조 및 개발의 선두주자입니다. 지속적인 혁신, 오래토록 변치 않는 품질 및 꾸준한 성장이 지난 70년 동안 계속적인 성장을 보장하였습니다. Pepperl+Fuchs의 전세계에 6,300명의 임직원을 보유하고 있으며, 독일, USA, 싱가포르, 헝가리, 인도네시아 및 베트남에 제조 시설을 가지고 있으며, 대부분 ISO9001을 획득하였습니다.