Serviceline Industrial Sensors
전문가 상담
Serviceline Explosion Protection
전문가 상담
산업용 센서

Distance sensor OMR50M-R1000-SSI-V1V1B

OMR50M-R1000-SSI-V1V1B
  • Maximum measurement accuracy
  • Switchable SSI/RS-422 interface
  • Red laser as the light emitter
  • Display and keypad for parameter settings
  • Compact and space-saving design

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

PDF 파일로 된 데이타 시트 다운로드:


데이타 시트 발췌: 기술 사양  OMR50M-R1000-SSI-V1V1B

제품 설명
Distance sensor for positioning tasks accurate to the millimeter, PRT, measuring range up to 50 m, SSI/RS-422 interface, M12 plug
General specifications
Measuring range0.3 ... 50 m
Reference targetREF-500MMx500MM (Foil reflector 500 mm x 500 mm)
REF-250MMx250MM (Film reflector 250 mm x 250 mm)
Light sourcelaser diode
Light typemodulated visible red light
Laser nominal ratings
NoteLASER LIGHT , DO NOT STARE INTO BEAM
Laser class1
Wave length660 nm
Beam divergence< 5 mrad
Pulse length5 ns
Repetition rate300 kHz
max. pulse energy< 2 nJ
Measuring methodPulse Ranging Technology (PRT)
Max. Motion velocity15 m/s
Diameter of the light spot< 25 cm at 50 m
Ambient light limit> 80000 Lux
Resolution0.1 mm , adjustable
Temperature influence0.03 mm/K
Functional safety related parameters
MTTFd> 100 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicator6 LEDs
Control elementsControl panel (4 membrane keys) for setting parameters
Parameterization indicatorIlluminated display for displaying measured values and parameterization
Electrical specifications
Operating voltage10 ... 30 V DC
No-load supply current625 mA (10 V) ... 250 mA (24 V) ... 220 mA (30 V)
Time delay before availability< 1 s
Interface
Interface typeSSI
Monoflop time20 µs
Clock frequency0.1 ... 1 MHz
Interface 1
Interface typeRS-422
Read out rate4.8 ... 115.2 kBit/s
Input/Output
Input/output type2 inputs/outputs, independent configuration, short-circuit protected, reverse polarity protected
Output
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA , resistive load
Voltage drop≤ 1.5 V DC
Conformity
Product standardEN 60947-5-2
Laser safetyEN 60825-1:2014
Measurement accuracy
Measured value output1 ms
Average data age3 ms , 6 ms , 12 ms , 25 ms , adjustable
Absolute accuracytyp. ± 2.5 mm
Repeat accuracy< 1 mm
Approvals and certificates
Protection classIII (rated insulation voltage 50 V)
UL approvalcULus Listed, Class 2 Power Source, Type 1 enclosure
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Ambient conditions
Ambient temperature-10 ... 60 °C (14 ... 140 °F)
Storage temperature-40 ... 75 °C (-40 ... 167 °F)
Relative humidity95 % , no moisture condensation
Mechanical specifications
Degree of protectionIP67
Connection4-pin, M12x1 connector, A-coded (supply) ,
5-pin, M12x1 connector, B-coded (SSI)
Material
HousingABS / PC
Optical facePMMA , hard coated
Massapprox. 300 g
Dimensions
Height106.6 mm
Width55 mm
Depth80.6 mm

Classifications

SystemClasscode
ECLASS 13.027270916
ECLASS 12.027270916
ECLASS 11.027270801
ECLASS 10.0.127270801
ECLASS 9.027270801
ECLASS 8.027270801
ECLASS 5.127270801
ETIM 9.0EC001825
ETIM 8.0EC001825
ETIM 7.0EC001825
ETIM 6.0EC001825
ETIM 5.0EC001825
UNSPSC 12.141111613

Details: OMR50M-R1000-SSI-V1V1B

Informative Literature: OMR50M-R1000-SSI-V1V1B

Language Selection:
Literature언어파일 타입파일 크기
Product Information - R1000 Distance SensorENGPDF504 KB

Product Documentation: OMR50M-R1000-SSI-V1V1B

Language Selection:
Manuals언어파일 타입파일 크기
ManualENGPDF1164 KB
Protocol Information
R1000 SerialLink protocol specification / R1000 SerialLink ProtokollbeschreibungALLPDF2808 KB
Software Information
OMRxxx-R1000 firmware v1.10 release notes / OMRxxx-R1000 Firmware v1.10 VersionshinweiseALLPDF645 KB

Design / Simulation: OMR50M-R1000-SSI-V1V1B

Language Selection:
CAD언어파일 타입파일 크기
CAD Portal / CAD PortalALLLINK---
CAD-files 3-D / CAD-Dateien 3-DALLSTP3525 KB
CAE
CAE EPLAN Data Portal / CAE EPLAN Data PortalALLLINK---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZALLEDZ70 KB

Approvals: OMR50M-R1000-SSI-V1V1B

Language Selection:
Certificates인증서 번호언어파일 타입파일 크기
Canada USA UL Ordinary LocationE87056ALLLINK---
EU Pepperl+FuchsPF08CERT1244ALLPDF503 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-5353AALLPDF225 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-6954ALLPDF223 KB

Software: OMR50M-R1000-SSI-V1V1B

Language Selection:
Device Description Files/DriversRelease Info파일 타입파일 크기
Add-On instruction when using EtherNet/IP protocol and AB PLC with Studio 5000 V35. R1000 SerialLink protocol used with DeviceMaster. / Add-On-Anweisung bei Verwendung des EtherNet/IP-Protokolls und AB PLC mit Studio 5000 V35. R1000 SerialLink-Protokoll mit DeviceMaster.6/2023ZIP25953 KB

관련문서: OMR50M-R1000-SSI-V1V1B

Accessories
  • V15-G-PG9
  • Female connector, field-attachable

Female connector M12 straight A-coded 5-pin, for cable diameter 6 - 8 mm, field-attachablefa
  • V15-W-PG9
  • Female connector, field-attachable

Female connector M12 angled A-coded 5-pin, for cable diameter 6 - 8 mm, field-attachablefa
  • V1-G-BK
  • Female connector, field-attachable

Female connector M12 straight A-coded 4-pin, for cable diameter 4 - 6 mm, field-attachablefa
  • V1-W-BK
  • Female connector, field-attachable

Female connector M12 angled A-coded 4-pin, for cable diameter 4 - 6 mm, field-attachablefa

Female connector M12 straight B-coded 5-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa
SSI bus cable, B-coded M12, 5-pin cablefa
SSI bus cable, B-coded M12, 5-pin cablefa
M12 protective cap set (connector + socket) for series LS610 / LS611fa
Reflective tapefa
Reflective tapefa
Reflective tape 1000 mm x 1000 mmfa
Reflective tape on metal plate 500 mm x 500 mmfa
Mounting bracket , Mounting bracket, Simple and fast mounting, Supplied with mounting materialfa
Mounting aid for R1000 series, Quick clamp and adjustment system, Simple installation and exact settingfa
Reflective tape on metal plate 250 mm x 250 mmfa
Deviation mirror, Simple and fast mounting, 90° beam deflection, Can be combined with adjustment devicefa
Mounting aid for R1000 series, For compatibility with mounting VDM100fa
Mounting aid for R1000 series, Simple and fast mountingfa
General Notes Relating to Pepperl+Fuchs Product Information

Discover the SmartRunner laser profile sensors equipped with a unique combination of light section technology and a 2-D vision sensor with integrated LEDs …

The R2000 provides reliable and extremely precise measuring results—with a gapless all-around visibility of 360° ...

Measuring in 3-D or at high speed: The R2300 series offers the right LiDAR sensor for every challenge. Learn more about the advantages, the technology, and the application areas ...

R10x and R20x series photoelectric sensors

For the first time, a consistent solution range of photoelectric functional principles and innovative technologies is available in identical housings. Users benefit from a uniform operating concept across the entire portfolio. Discover the R100, R101, R103, R200 and R201 series ...

페펄앤드푹스코리아(주)
서울특별시 서초구 서초대로88
6층 (유니온빌딩)
06673 대한민국
대한민국
info@kr.pepperl-fuchs.com
phone +82 2 34819494

© 2024 All Rights Reserved.

Pepperl+Fuchs는 세계 자동화 시장에서 전자기 센서 및 컴포넌트 제조 및 개발의 선두주자입니다. 지속적인 혁신, 오래토록 변치 않는 품질 및 꾸준한 성장이 지난 70년 동안 계속적인 성장을 보장하였습니다. Pepperl+Fuchs의 전세계에 6,300명의 임직원을 보유하고 있으며, 독일, USA, 싱가포르, 헝가리, 인도네시아 및 베트남에 제조 시설을 가지고 있으며, 대부분 ISO9001을 획득하였습니다.