Serviceline Industrial Sensors
Serviceline Explosion Protection

Thru-beam sensor (pair) OBE10M-18GF60-SA0-3M-IR

OBE10M-18GF60-SA0-3M-IR
  • Sensing range 10 m
  • With increased sealing, degree of protection IP68
  • Integrated circuit
  • Narrow opening angle, suitable for mounting in pairs
  • Not sensitive to ambient light
  • DC voltage version
  • Test input
  • Reverse polarity protection
  • Short-circuit protected
  • Switching status indicator, yellow LED
  • Fixed cable

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

PDF 파일로 된 데이타 시트 다운로드:


데이타 시트 발췌: 기술 사양  OBE10M-18GF60-SA0-3M-IR

제품 설명
Thru-beam sensor, M18 threaded housing design, plastic housing, 10 m detection range, infrared light, light/dark on, DC version, 2 NPN outputs, fixed cable
System components
EmitterOBE10M-18GF60-S-3M-IR
ReceiverOBE10M-18GF60-A0-3M-IR
General specifications
Effective detection range0 ... 10 m
Threshold detection range12 m
Light sourceIRED
Light typemodulated infrared light , 850 nm
Diameter of the light spotapprox. 1500 mm at a distance of 10 m
Opening angleEmitter: +/- 5 ° ; Receiver: +/- 10 °
Optical facefrontal
Ambient light limit10000 Lux
Accessories providedMounting nuts
Functional safety related parameters
MTTFd606 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorEmitter: LED green: Power on
Function indicatorReceiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted
Electrical specifications
Operating voltage10 ... 30 V DC
No-load supply currentEmitter: ≤ 17 mA
Receiver: ≤ 13 mA
Protection classClass III
Input
Test inputemitter deactivation at 0 V
Output
Switching typedark-on and light-on
Signal output2 NPN complementary, short-circuit protected, reverse polarity protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Voltage drop≤ 1.5 V DC
Switching frequency80 Hz
Response time6 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
CE conformityCE
UKCA conformityUKCA
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Relative humidity90 % , noncondensing
Mechanical specifications
Degree of protectionIP67 / IP68
Connectionfixed cable Receiver: grey ; Emitter: black
Material
HousingPC , black
Optical facePlastic pane
Cable
Length3 m
Massapprox. 120 g per device
Dimensions
Length59 mm
Diameter18 mm
Thread sizeM18

Classifications

SystemClasscode
ECLASS 13.027270901
ECLASS 12.027270901
ECLASS 11.027270901
ECLASS 10.0.127270901
ECLASS 9.027270901
ECLASS 8.027270901
ECLASS 5.127270901
ETIM 9.0EC002716
ETIM 8.0EC002716
ETIM 7.0EC002716
ETIM 6.0EC002716
ETIM 5.0EC002716
UNSPSC 12.139121528

Details: OBE10M-18GF60-SA0-3M-IR

Approvals: OBE10M-18GF60-SA0-3M-IR

Language Selection:
Certificates인증서 번호언어파일 타입파일 크기
Canada USA UL Ordinary LocationUL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3ALLPDF1806 KB
Declaration of Conformity
EU-Declaration of conformityTDOC-6980AENGENGPDF220 KB
EU-Declaration of conformityTDOC-6980BENGENGPDF220 KB
UK-Declaration of conformity / UK-KonformitätserklärungDOC-6981ALLPDF222 KB
UK-Declaration of conformityTDOC-6981AENGENGPDF195 KB
UK-Declaration of conformityTDOC-6981BENGENGPDF195 KB

관련문서: OBE10M-18GF60-SA0-3M-IR

Accessories
Mounting Bracket with swivel nutfa
Mounting Bracket with swivel nutfa
Mounting brackets for sensorsfa
R10x and R20x series photoelectric sensors

For the first time, a consistent solution range of photoelectric functional principles and innovative technologies is available in identical housings. Users benefit from a uniform operating concept across the entire portfolio. Discover the R100, R101, R103, R200 and R201 series ...

ML100 Photoelectric Sensor

Whether glass, solar wafers or printed circuit boards: The photoelectric sensors of the ML100 series are precisely tailored to meet the requirements of various complex detection tasks. Learn more about the portfolio and find the ideal sensor for your application ...