Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne
RL29-55/73c/136
| Opis produktu |
| Retroreflective sensor with polarization filter |
| General specifications |
| Effective detection range | 0.1 ... 7 m |
| Threshold detection range | 10 m |
| Reference target | H85 reflector |
| Light source | LED, 660 nm |
| Light type | modulated visible red light |
| Polarization filter | yes |
| Diameter of the light spot | approx. 150 mm at a distance of 7 m |
| Opening angle | Emitter: 1.2 ° , Receiver: 2 ° |
| Ambient light limit | 80000 Lux |
| Functional safety related parameters |
| MTTFd | 1982.2 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Function indicator | LED yellow, light with free light beam , flashes when falling short of the operating reserve |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC , class 2 |
| Ripple | 10 % |
| No-load supply current | ≤ 30 mA |
| Output |
| Switching type | dark-on |
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA |
| Switching frequency | 500 Hz |
| Response time | 1 ms |
| Conformity |
| Product standard | EN 60947-5-2 |
| Approvals and certificates |
| EAC conformity | TR CU 020/2011 |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Approvals | CE, cULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure) |
| Ambient conditions |
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) |
| Storage temperature | -40 ... 75 °C (-40 ... 167 °F) |
| Mechanical specifications |
| Degree of protection | IP65 |
| Connection | Plastic connector M12 x 1, 4-pin |
| Material | |
| Housing | Plastic ABS |
| Optical face | plastic |
| Mass | 70 g |
| Dimensions | |
| Height | 88 mm |
| Width | 25.8 mm |
| Depth | 54.3 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270902 |
| ECLASS 12.0 | 27270902 |
| ECLASS 11.0 | 27270902 |
| ECLASS 10.0.1 | 27270902 |
| ECLASS 9.0 | 27270902 |
| ECLASS 8.0 | 27270902 |
| ECLASS 5.1 | 27270902 |
| ETIM 9.0 | EC002717 |
| ETIM 8.0 | EC002717 |
| ETIM 7.0 | EC002717 |
| ETIM 6.0 | EC002717 |
| ETIM 5.0 | EC002717 |
| UNSPSC 12.1 | 39121528 |
Details:
RL29-55/73c/136
Product Documentation:
RL29-55/73c/136
Design / Simulation:
RL29-55/73c/136
Approvals:
RL29-55/73c/136
Produkty powiązane:
RL29-55/73c/136
| Accessories |
|
|
|
| Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa |
|
|
|
|
| Mounting bracket: mounting aid for sensors in the RL* seriesfa |
|
|
|
|
| Mounting aid for RL* seriesfa |
|
|
|
|
| Mounting bracket for rear wall mountingfa |
|
|
|
|
| Weld slag cover modelfa |
|
+48 22 256 9770