AS-Interface Safety Monitor VAS-4A16L-K31
- Certified up to SIL 3 according to IEC 61508 and EN 62061 and up to PLe according to EN 13849
- Stainless steel housing
- LC display for slave addresses and error messages
- Configuration and commissioning with configuration software
- 2 safe output relays and 2 safe electronic outputs
- 2 AS-Interface networks
- Memory card for configuration data
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne VAS-4A16L-K31
| Opis produktu |
|---|
| Safety Monitor, 16 decentralized output circuits |
| General specifications | ||
|---|---|---|
| AS-Interface specification | V3.0 | |
| PLC-Functionality | none | |
| Duplicate address detection | from AS-Interface slaves | |
| Earth fault detection | integrated | |
| EMC monitoring | integrated | |
| Diagnostics function | Extended function via display | |
| Switch-on delay | < 10 s | |
| Response delay | < 40 ms | |
| UL File Number | E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 3 | |
| Performance level (PL) | PL e | |
| MTTFd | 200 a | |
| B10d | 2 E+7 | |
| Indicators/operating means | ||
| Display | Illuminated graphical LC display for addressing and error messages | |
| LED FAULT | Error display; red LED red: Communication error red flashing: release circuit error |
|
| LED POWER | voltage ON; LED green | |
| LED U AS-i 1 / U AS-i 2 | AS-Interface voltage - circuit 1/circuit 2; green LED | |
| LED ready | off: - constantly lit: startup/restart lock active flashing: external test required |
|
| LED AUX | ext. auxiliary voltage UAUX ; LED green | |
| LED EDM/Start | External device monitoring circuit inputs closed, 4x yellow LEDs | |
| LED output circuit | Output circuit closed; 4 x green LEDs | |
| Button | 4 | |
| Electrical specifications | ||
| Insulation voltage | ≥ 500 V | |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface; 24 V DC |
|
| Rated operating current | ≤ 200 mA from 24 VDC ≤ 45 mA from AS-Interface |
|
| Interface | ||
| Interface type | RS 232, serial | |
| Transfer rate | 19.6 kbaud, no parity, 1 start bit, 1 stop bit, 8 data bits | |
| Interface 2 | ||
| Interface type | Chip card slot | |
| Input | ||
| Number/Type | 4 EDM/Start inputs: EDM: Inputs for the external device monitoring circuits Start: start inputs: Static switching current 4 mA at 24 V, dynamic 30 mA at 24 V (T=100 μs) |
|
| Output | ||
| Safety output | Output circuits 1 and 2: 2 potential-free contacts, max. contact load: 3 ADC-13 at 30 VDC, 3 AAC-15 at 30 VAC Output circuits 3 and 4: 2 PNP transistor outputs max. contact load: 0.5 ADC-13 at 30 VDC |
|
| Connection | ||
| AS-Interface | spring terminals, removable | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007 | |
| Standard conformity | ||
| Electromagnetic compatibility | EN 61000-6-2:2005, EN 61000-6-4:2007 | |
| Degree of protection | EN 60529:2000 | |
| AS-Interface | EN 62026-2:2013 | |
| Shock resistance | EN 61131-2:2004 | |
| Standards | EN 61000-6-2:2005, EN 61000-6-4:2007 EN 954-1:1996 (up to Kategorie 4), IEC 61508:2001 and EN 62061:2005 (up to SIL3) EN 13849:2008 (PL e) | |
| Approvals and certificates | ||
| UL approval | An isolated source with a secondary open circuit voltage of ≤ 30 VDC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed. UL mark does not provide UL certification for any functional safety rating or aspects of the device. |
|
| Ambient conditions | ||
| Ambient temperature | 0 ... 55 °C (32 ... 131 °F) | |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Material | ||
| Housing | Stainless steel | |
| Mass | 800 g | |
| Dimensions | ||
| Height | 120 mm | |
| Width | 85 mm | |
| Length | 89 mm | |
| Construction type | Low profile housing , Stainless steel | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27243101 |
| ECLASS 12.0 | 27243101 |
| ECLASS 11.0 | 27243101 |
| ECLASS 10.0.1 | 27243101 |
| ECLASS 9.0 | 27243101 |
| ECLASS 8.0 | 27279215 |
| ECLASS 5.1 | 27279215 |
| ETIM 9.0 | EC001449 |
| ETIM 8.0 | EC001449 |
| ETIM 7.0 | EC001449 |
| ETIM 6.0 | EC001449 |
| ETIM 5.0 | EC001449 |
| UNSPSC 12.1 | 39121535 |
Details: VAS-4A16L-K31
Function
The VAS-4A16L-K31 is a stainless steel safety monitor for 2 AS-Interface circuits in accordance with AS-Interface specification 3.0 with degree of protection IP20. The VAS-4A16LK31 has four inputs and four outputs. Two inputs are used for extended EDM device monitoring. Due to the 16 independent AS-Interface release circuits, several safe AS-Interface outputs are possible on one address. The K31 model is particularly suitable for installation in a control cabinet.
Two safety relays provide a safe interface to the connected consumers.
Address assignment and the transfer of the desired configuration can be performed using switches. Five LEDs located on the front panel indicate the current status of the AS-Interface segment. Local operation using the graphical display and the four switches allows all the functions covered on the other AS-Interface masters by AS-i Control Tools software to be visualized on the display. An RS 232 socket provides a way of exporting data relating to the network and operation directly from the safety monitor for extended local diagnosis purposes.
Product Documentation: VAS-4A16L-K31
| Product information | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| Configuring a Safe Input on AS-Interface Safety at Work | ENG | 258 KB | |
| Brief Instructions | |||
| Installation instructions VAS-4A16L-K31 / Montageanweisung VAS-4A16L-K31 | ALL | 1543 KB | |
| Manuals | |||
| Manual VAS-2A1L-K31 & VAS-4A16L-K31 | ENG | 5570 KB | |
| Replacing the AS-Interface consortial Safety Monitor | ENG | 3164 KB | |
Design / Simulation: VAS-4A16L-K31
| CAD | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2685 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: VAS-4A16L-K31
| Certificates | Nr. certyfikatu | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|---|
| US CA UL | E223772 | ALL | LINK | --- |
Software: VAS-4A16L-K31
| Software Tools | Informacja o wersji | Typ pliku | Rozmiar pliku |
|---|---|---|---|
| SISTEMA SLB Library AS-Interface Safety / SISTEMA SLB Library AS-Interface Safety | ZIP | 622 KB |
Produkty powiązane: VAS-4A16L-K31
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
+48 22 256 9770
Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.