Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne
OBE500-R2F-SE2-0,2MV31-Y263382
| Opis produktu |
| Thru-beam sensor, flat design, space-saving M2 mounting, 500 mm detection range, red light, dark on, PNP output, with 0.2 m fixed cable and M8 plug, 4-pin |
| System components |
| Emitter | OBE500-R2F-S-0,2M-V31 |
| Receiver | OBE500-R2F-E2-0,2M-V31-Y814590 |
| General specifications |
| Effective detection range | 0 ... 500 mm
|
| Threshold detection range | 700 mm
|
| Light source | LED |
| Light type | modulated visible red light , 630 nm |
| LED risk group labelling | exempt group |
| Angle deviation | approx. 2 ° |
| Object size | typ. starts from 1.5 mm |
| Diameter of the light spot | approx. 90 mm at a distance of 500 mm |
| Opening angle | approx. 5 ° |
| Optical face | frontal |
| Ambient light limit | EN 60947-5-2 : 25000 Lux |
| Functional safety related parameters |
| MTTFd | 806 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz) |
| Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| No-load supply current | < 10 mA |
| Protection class | III |
| Input |
| Test input | Test of switching function at 0 V |
| Switching threshold | Teach-In input |
| Output |
| Switching type | NO contact / dark-on |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage | max. 30 V DC |
| Switching current | max. 50 mA , resistive load |
| Voltage drop | ≤ 1.5 V DC |
| Switching frequency | approx. 1 kHz |
| Response time | 500 µs |
| Conformity |
| Product standard | EN 60947-5-2 |
| Approvals and certificates |
| UL approval | E87056 , cULus Recognized, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 200 mm fixed cable with 4-pin, M8x1 connector |
| Material | |
| Housing | PC (Polycarbonate) and Stainless steel |
| Optical face | PMMA |
| Cable | PUR |
| Mass | approx. 10 g per sensor |
| Tightening torque, fastening screws | 0.25 Nm |
| Dimensions | |
| Height | 25.5 mm |
| Width | 12 mm |
| Depth | 4.1 mm |
| Cable length | 200 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details:
OBE500-R2F-SE2-0,2MV31-Y263382
Product Documentation:
OBE500-R2F-SE2-0,2MV31-Y263382
Design / Simulation:
OBE500-R2F-SE2-0,2MV31-Y263382
Approvals:
OBE500-R2F-SE2-0,2MV31-Y263382
Produkty powiązane:
OBE500-R2F-SE2-0,2MV31-Y263382
| Accessories |
|
|
|
| Female cordset single-ended M8 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Female cordset single-ended M8 angled A-coded, 4-pin, PUR cable greyfa |
|
+48 22 256 9770