Bullet WirelessHART Adapter WHA-BLT-F9D0-N-A0-Z1-1
- Installation in Zone 1, 21
- Installation in Class I, II, Division 1
- Installation in Class III
- Ex d housing for Ex d field devices
- Cast aluminum housing
- Loop powered
- Direct mounting on HART or 4 mA ... 20 mA field device
- Encapsulated antenna
- Up to 8 field devices in multidrop
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Technische gegevens WHA-BLT-F9D0-N-A0-Z1-1
| Supply | ||
|---|---|---|
| Rated voltage | 7 ... 32 V DC | |
| Rated current | < 1 mA , max. 25 mA | |
| Electrical specifications | ||
| Output current | 3.2 ... 25 mA | |
| Supply | loop power for field devices voltage: 1 ... 2.5 V DC, adjustable in steps of 0.5 V |
|
| Input | ||
| Connection | - 5 wires, 600 mm long, exiting from male thread NPT1/2 - 1 external grounding point |
|
| HART communication | ||
| Protocol | HART 7.1, backward compatible | |
| Number of devices | up to 8 HART field devices (depending on installation) | |
| Output | ||
| Interface | internal antenna | |
| Communication | WirelessHART specifications - physical layer: IEEE 802.15.4.2006 - frequency band: 2.4 GHz (ISM band, licence free) - maximum transmit power: +10 dBm - outdoor transmission range: 235 m - communication standard: WirelessHART acc. to IEC 62591 |
|
| Directive conformity | ||
| Radio and telecommunication terminal equipment | The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning. | |
| Directive 2014/53/EU | EN 300 328 V2.1.1:2016 EN 301 489-1 V2.2.0:2017 EN 301 489-17 V3.2.0:2017 |
|
| FCC CFR47 Part 15 B and C | ANSI C63.4-2003 , FCC ID: X89-WA1101 | |
| Conformity | ||
| Degree of protection | IEC 60529:2013 | |
| Ambient conditions | ||
| Ambient temperature | temperature class T5: -40 ... 85 °C (-40 ... 185 °F) temperature class T6: -40 ... 75 °C (-40 ... 167 °F) |
|
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | max. 100 % | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Material | aluminum alloy with polyurethane enamel paint | |
| Mass | 460 g | |
| Dimensions | 60.8 x 60.8 x 100 mm (l x w x h) | |
| Height | 100 mm | |
| Diameter | 60.8 mm | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | FM 17 ATEX 0046 X | |
| Marking |  II 2 G Ex db IIC T6...T5 Gb II 2 D Ex tb IIIC T95°C Db |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-1:2014 , EN 60079-31:2014 | |
| International approvals | ||
| FM approval | FM 17 NUS 0010 FM 17 US 0191 X |
|
| Control drawing | 116-0425 (cFMus) | |
| Approved for | XP Class I, II, III, Division 1, Groups A-G Class I, Zone 1, AEx db IIC T6...T5 Gb Zone 21, AEx tb IIIC T95°C Db |
|
| CSA approval | FM 17 NCA 0004 FM 17 CA 0102 X |
|
| Control drawing | 116-0425 (cFMus) | |
| Approved for | XP Class I, II, III, Division 1, Groups A-G Ex db IIC T6...T5 Gb Ex tb IIIC T95°C Db |
|
| IECEx approval | ||
| IECEx certificate | IECEx FMG 17.0020X | |
| IECEx marking | Ex db IIC T6...T5 Gb , Ex tb IIIC T95°C Db | |
| Standards | IEC 60079-0:2011 , IEC 60079-1:2014 , IEC 60079-31:2013 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27219090 |
| ECLASS 12.0 | 27219090 |
| ECLASS 11.0 | 27219290 |
| ECLASS 10.0.1 | 27219290 |
| ECLASS 9.0 | 27219290 |
| ECLASS 8.0 | 27219290 |
| ECLASS 5.1 | 27242692 |
| ETIM 9.0 | EC002584 |
| ETIM 8.0 | EC002584 |
| ETIM 7.0 | EC002584 |
| ETIM 6.0 | EC002584 |
| ETIM 5.0 | EC002584 |
| UNSPSC 12.1 | 39121008 |
Details: WHA-BLT-F9D0-N-A0-Z1-1
Informative Literature: WHA-BLT-F9D0-N-A0-Z1-1
| Literature | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Application Report - Outdoor Monitoring of Gas Limit Values | ENG | 158 KB | |
| Application Report - WirelessHART Adapter Bullet Enables More Flexibility for Mobile Mixing Tanks | ENG | 129 KB | |
| Application Report - WirelessHART Connects Mobile Measurement Stations | ENG | 149 KB | |
| Application Report - Wirelessly Networked Tank Farms | ENG | 736 KB |
Product Documentation: WHA-BLT-F9D0-N-A0-Z1-1
| System Descriptions | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Patent Information | ENG | 365 KB | |
| Safety and Security Documentation | |||
| Handleiding | HOL | 0 KB | |
| Manuals | |||
| Manual | ENG | 2085 KB | |
Approvals: WHA-BLT-F9D0-N-A0-Z1-1
| Certificates | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|---|
| Europe FM ATEX ia 1G ATEX ia 1D | FM 17 ATEX 0046X | ALL | 301 KB | |
| Korea KOSHA | 21-AV4BO-0226X | ALL | 462 KB | |
| Control Drawings | ||||
| Control drawing CSA / Control drawing CSA | ALL | 187 KB | ||
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3835D | ALL | 78 KB | |
Software: WHA-BLT-F9D0-N-A0-Z1-1
| Device Description Files/Drivers | Vrijgave-informatie | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| DTM WirelessHART Adapter WHA-BLT* "Bullet" / DTM WirelessHART Adapter WHA-BLT* "Bullet" | ZIP | 16481 KB | |
| FHX-File WirelessHART Adapter WHA-BLT* "Bullet" / FHX-Datei WirelessHART Adapter WHA-BLT* "Bullet" | ZIP | 1115 KB | |
| DD WirelessHART Adapter WHA-BLT* "Bullet" / DD WirelessHART Adapter WHA-BLT* "Bullet" | ZIP | 3513 KB |
Aanverwante producten: WHA-BLT-F9D0-N-A0-Z1-1
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Pepperl+Fuchs N.V.
Metropoolstraat 11
2900 Schoten / Anvers
BELGIË
BTW BE 0436.097.152, RPR Antwerpen, afd. Antw.
sales@be.pepperl-fuchs.com
+32 3 644 25 00
© 2024 Alle rechten voorbehouden.
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.