Distance sensor OMR60M-R200-2EP-IO-V1-L

Medium design with versatile mounting options
Space-saving distance sensors in small standardized design
Measuring method PRT (Pulse Ranging Technology)
IO-Link interface for service and process data
Red laser light, laser class 1

Folha de Dados
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
Produtos Relacionados

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Faça o download das folhas de dados em PDF:

Folhas de dados: Dados técnicos do OMR60M-R200-2EP-IO-V1-L

Descrição do Produto
Universal distance sensor, measurement to reflector, IO-Link interface, measuring method PRT, measuring range up to 60 m, red laser light, laser class 1, push-pull output, M12 plug

General specifications
Measuring range		0.2 ... 60 m
Reference target		OFR-500/500
Light source		laser diode
Light type		modulated visible red light
Laser nominal ratings
	Note	LASER LIGHT , DO NOT STARE INTO BEAM
	Laser class	1
	Wave length	660 nm
	Beam divergence	2 mrad
	Pulse length	4 ns
	Repetition rate	300 kHz
	max. pulse energy	< 1.3 nJ
Measuring method		Pulse Ranging Technology (PRT)
Max. Motion velocity		10 m/s
Diameter of the light spot		< 20 mm at 10 m
Ambient light limit		10000 Lux
Resolution		1 mm
Temperature influence		< 0.25 mm/K
Functional safety related parameters
MTTF_d		> 300 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Function indicator		LED yellow: constantly on - switch output active constantly off - switch output inactive
Teach-in indicator		Teach-In : LED yellow/green; equiphase flashing; 2,5 Hz Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz
Control elements		Teach-In key
Control elements		5-step rotary switch for operating modes selection
Electrical specifications
Operating voltage		10 ... 30 V DC 18 ... 30 V from IO-Link
Ripple		10 % within the supply tolerance
No-load supply current		< 25 mA at 24 V Operating voltage
Protection class		III
Time delay before availability		< 900 ms
Interface
Interface type		IO-Link ( via C/Q = pin 4 )
IO-Link revision		1.1
Device profile		Identification and Diagnosis - I&D Smart Sensor - SSP 4.2.1
Process data		Input 6 Byte - measurement value 4 Byte - scaling factor 8 Bit - signal quality 2 Bit - switching signal 1 1 Bit - switching signal 2 1 Bit - diagnosis signals n Bit - additional signals n Bit Output 2 Bit - sensor control function 1 Bit - evaluation freeze 1 Bit
Vendor ID		1 (0x0001)
Device ID		1121041 (0x111B11)
Transfer rate		COM2 (38.4 kBit/s)
Min. cycle time		4 ms
SIO mode support		yes
Output
Switching type		The default setting is: C/Q - Pin4: push-pull output, IO-Link Q2 - Pin2: push-pull output
Signal output		2x push-pull outputs, reverse polarity protected, surge-proof
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Usage category		DC-12 and DC-13
Voltage drop		≤ 1.5 V DC
Response time		3 ms
Conformity
Communication interface		IEC 61131-9 / IO-Link V1.1.3
Product standard		EN 61000-6-2, EN 61000-6-3
Laser safety		EN 60825-1:2014
Measurement accuracy
Warm up time		5 min
Measured value output		1 ms
Average data age		3 ms (default), 6 ms , 12 ms , 25 ms , 50 ms , 100 ms , adjustable
Absolute accuracy		typ. ± 20 mm (including influence of temperature)
Repeat accuracy		< 6 mm
Approvals and certificates
UL approval		E87056 , cULus Listed , class 2 power supply , type rating 1
CCC approval		CCC approval / marking not required for products rated ≤36 V
FDA approval		IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Ambient conditions
Ambient temperature		-30 ... 60 °C (-22 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP67 / IP69 / IP69K
Connection		4-pin, M12 x 1 connector, 90° rotatable
Material
	Housing	PC (Polycarbonate)
	Optical face	PMMA
Mass		approx. 37 g
Dimensions
	Height	50.6 mm
	Width	15 mm
	Depth	41.7 mm
Factory settings
Switching output 1		Q1: switching signal high-active , Window mode 6000 ... 9000 mm
Switching output 2		Q2: switching signal high-active , Window mode 4000 ... 8000 mm

Classifications

System	Classcode
ECLASS 13.0	27270916
ECLASS 12.0	27270916
ECLASS 11.0	27270801
ECLASS 10.0.1	27270801
ECLASS 9.0	27270801
ECLASS 8.0	27270801
ECLASS 5.1	27270801
ETIM 9.0	EC001825
ETIM 8.0	EC001825
ETIM 7.0	EC001825
ETIM 6.0	EC001825
ETIM 5.0	EC001825
UNSPSC 12.1	41111613

Details: OMR60M-R200-2EP-IO-V1-L

Informative Literature: OMR60M-R200-2EP-IO-V1-L

Literature	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Product information R10x and R20x Series Standard Housings - All Sensing Modes	ENG	PDF	2583 KB
Application Report - Compact Design and Precise Distance Measurement up to 60 m	ENG	PDF	332 KB

Product Documentation: OMR60M-R200-2EP-IO-V1-L

Product information	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Installation and user instructions for offline parameterization of IO-Link sensors	ENG	PDF	1788 KB
Parameter Information
IO-Link parameter documentation OMR60M-R200-2EP-IO* series	ENG	PDF	420 KB

Design / Simulation: OMR60M-R200-2EP-IO-V1-L

CAD	Idioma	Tipo de Arquivo	Tamanho do Arquivo
CAD 3-D / CAD 3-D	ALL	STP	1499 KB

Approvals: OMR60M-R200-2EP-IO-V1-L

Certificates	Número do Certificado	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Canada USA UL Ordinary Location	UL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3	ALL	PDF	1806 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)	TDOC-7485_POR	POR	PDF	220 KB
UK Declaration of Conformity (P+F)	TDOC-7486_ENG	ENG	PDF	195 KB

Software: OMR60M-R200-2EP-IO-V1-L

Device Description Files/Drivers	Informações	Tipo de Arquivo	Tamanho do Arquivo
IODD for OMR60M-R200-L series / IODD für OMR60M-R200-L Serie	V1.01.000 / 2024-07-09	ZIP	427 KB
DTM / DTM		ZIP	16922 KB
Software Tools
IO-Link Offline Parameterization Tool / IO-Link Offline-Parametriertool	V1.00.006 / 2022-07-10	ZIP	96138 KB

Produtos Relacionados: OMR60M-R200-2EP-IO-V1-L

Accessories

	V1-G-PG9 Female connector, field-attachable
	Female connector M12 straight A-coded 4-pin, for cable diameter 6 - 8 mm, field-attachablefa

	V1-W-PG9 Female connector, field-attachable
	Female connector M12 angled A-coded 4-pin, for cable diameter 6 - 8 mm, field-attachablefa

	V1-G-2M-PUR Female cordset
	Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa

	V1-W-2M-PUR Female cordset
	Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa

	Schutzkappe LS610 Zubehoer Mounting aid
	M12 protective cap set (connector + socket) for series LS610 / LS611fa

	IO-Link-Master02-USB IO-Link master
	IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa

	OMH-R200-01 Mounting aid
	Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa

	OFR-100/100 Reflective tape
	Reflective tape 100 mm x 100 mmfa

	OFR-500/500 Reflective tape
	Reflective tapefa

	PACTware 6.x FDT Framework
	Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Download from Pepperl+Fuchs websitepa

Notas Gerais sobre as informações de produto da Pepperl+Fuchs

Pepperl+Fuchs Ltda.
Rua José Versolato, 111
Domo Corporate Tower, Conjunto 144
09750-730 São Bernardo do Campo, SP
Brasil
vendas@br.pepperl-fuchs.com
phone +55 11 4007 1448

A Pepperl+Fuchs é líder na fabricação e no desenvolvimento de sensores e componentes eletrônicos para o setor global da automação industrial. Inovação contínua, qualidade e crescimento constante garantem o nosso sucesso há mais de 70 anos. Empregamos mais de 6.300 colaboradores em todo o mundo e contamos com fábricas próprias na Alemanha, Estados Unidos, Cingapura, Hungria, Indonésia e Vietnã, todas com certificação ISO 9001.