Operator Workstation (RM) RM-GXP1100-22F--T3

VisuNet GXP Remote Monitor Zone 1/21 (2020 Generation)

21.5" (54.61 cm) display
16:9 aspect ratio widescreen formatting to match engineering stations
Thin Client solution (with VisuNet RM Shell firmware)
Lightweight design
Full HD Resolution
Completely modular system for easy field maintainability
Flush or bezel mounting options
IP66 rating for each individual component and entire system with housing
Certified for ATEX and IECEx Zone 1/21
UL listed for USA and Canada

Technical Data
Product Documentation
Design / Simulation
Approvals
Produits associés
Vous sollicitez un expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Téléchargez ici la fiche technique complète en PDF:

Caractéristiques techniques RM-GXP1100-22F--T3

Description produit
VisuNet GXP Remote Monitor Zone 1/21 (2020 Generation, Intel® Atom Apollo Lake Processor)

General specifications
Type		Remote Monitor
Hardware
Processor		Intel® Atom Apollo Lake E3930 Alternative: Intel® Atom™ Atom Apollo Lake E3940*
RAM		4 GB
Mass storage		32 GByte industrial grade MLC SSD
Supply
Power consumption
	AC	115/230 V AC, 0.4 ... 0.7 A, 50/60 Hz
	DC	18 ... 36 V DC , 1.5 ... 3 A
Indicators/operating means
Display
	Type	Liquid Crystal Display (LCD) with LED backlight
	Screen diagonal	54.61 cm (21.5 inch)
	Resolution	1920 x 1080 pixels (Full HD) Aspect ratio 16:9
	Color depth	24 bit (16.7 M) color
	Contrast	5000:1 (typically)
	Brightness	300 cd/m² (nit)
	Reading angle	175° in all directions
	Life span	back lamp life: 50.000 hrs typical half life , at 25 °C (77 °F)
Input devices
	Touch screen	optional: projective capacitive; 10 finger multi-touch, glove friendly
	Keyboard	Foil keyboard with different pointing device options available (see EXTA4 datasheet)
Interface
Interface type		Standard: 1 x Ethernet 100/1000BASE-TX (Ex e) or 1 x fiber optic 1000BASE-SX (Multimode) or 1 x fiber optic 1000BASE-LX (Singlemode), 1 x USB 2.0 (Ex e), 2 x USB 1.1 (Ex i; intended for Pepperl+Fuchs keyboard and mouse), 1 x DC or AC power in (via power supply unit) Optional: "interface 3": 1 x barcode reader interface for wired 1-D scanners IDM-160-D, IDM-Z1-160-D- and base station IDMx61-B-* and IDM-Z1-x61-B-* (Ex i) "interface 4": 1 x barcode reader interface for wired 2-D Scanner IDM-Z1-260-D-* (Ex i) "interface 5": 1 x RS-232 interface with Power Supply for miscellaneous devices and peripherals (Ex i) 1 x RS-232 (Ex e) 1 x RS-485 (Ex e) 1 x Ethernet 100/1000Base-TX (Ex e) Bluetooth v4.0, communication distance up to 30 m in open terrain, transmission power +8 dBm, transmission frequency 2.402 ... 2.48 GHz
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations) non-Bluetooth products only
Radio and telecommunication terminal equipment
	Directive 2014/53/EU	EN 301 328 V2.1.1 EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.1 Bluetooth products only
RoHS
	Directive 2011/65/EU (RoHS)	EN 50581:2012-09
Software
Operating system		VisuNet RM Shell 5.x (based on Microsoft® Windows® 10 IoT Enterprise 2019 LTSC (x64))
Ambient conditions
Operating temperature		-20 ... 50 °C (-4 ... 122 °F) Display might react sluggishly below 0 °C
Storage temperature		-20 ... 60 °C (-4 ... 140 °F)
Relative humidity		93% at 40°C, non-condensating, according to EN60068-2-78
Altitude		Operating altitude max. 2000 m
Shock resistance		18 shocks 15 g , 11 ms all axis, IEC 60068-2-27
Vibration resistance		10 ... 150 Hz, +/- 0.075 mm , 1g, 10 cycles per axis according to EN60068-2-6
Mechanical specifications
Degree of protection		IP66 (individual components and entire system with housing)
Material		Internal: Panel: anodized aluminum (TCU, PCU, PSU), powder coated aluminum (DPU) External: Bezel: stainless steel AISI 304 (1.4301) System housing H4: stainless steel AISI 304 (1.4301), bead blasted, typical surface roughness Ra = 1.6 µm
Installation		Flush-mount installation (requires customized mounting kit) Panel-mount installation into system housing with bezel Panel-mount installation into cabinet with Bezel and standard mounting kit
Mass		Panel (DPU with bezel, TCU, PSU DC): approx. 23 kg Panel (DPU with bezel, TCU, PSU AC): approx. 24 kg System housing (AG-XX00): approx. 11 kg
Dimensions		Panel (DPU with bezel, TCU, PSU DC): 625 mm x 459 mm x 120 mm Panel (DPU with bezel, TCU, PSU AC): 625 mm x 459 mm x 137 mm Panel with system housing: 625 mm x 459 mm x 173 mm Panel cut-out dimensions: 583 mm x 417 mm (installation surface)
Note		* see nameplate: 2021 alternative, processor cannot be selected
Data for application in connection with hazardous areas
EU-type examination certificate		BVS 17 ATEX E 036 X
	Marking	II 2G Ex eb q ib [ib] IIC T4 IP66 Gb II 2D Ex tb [ib] IIIC T85°C IP66 Db
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013, EN 60079-5:2015, EN 60079-7:2015, EN 60079-11:2012, EN 60079-31:2014
International approvals
UL approval		E492874
	Approved for	Class I, Division 2, Groups A, B, C, D T4; Zone 2, Group IIC T4 Class II, Division 2, Groups F, G T4; Zone 22, Group IIIB T85 Class III; Zone 22, Group IIIA T85
IECEx approval		IECEx BVS 17.0029X
	Approved for	Ex eb q ib [ib] IIC T4 IP66 Gb Ex tb [ib] IIIC T85°C IP66 Db
	Standards	IEC 60079-0:2011, IEC 60079-5:2015, IEC 60079-7:2015, IEC 60079-11:2011, IEC 60079-31:2013

Classifications

System	Classcode
ECLASS 13.0	27330201
ECLASS 12.0	27330201
ECLASS 11.0	27330201
ECLASS 10.0.1	27330201
ECLASS 9.0	27330201
ECLASS 8.0	27339090
ECLASS 5.1	27242402
ETIM 9.0	EC001428
ETIM 8.0	EC001428
ETIM 7.0	EC001428
ETIM 6.0	EC001428
ETIM 5.0	EC001428
UNSPSC 12.1	39121106

Details: RM-GXP1100-22F--T3

Product Documentation: RM-GXP1100-22F--T3

Safety and Security Documentation	Langue	Type de fichier	Taille
Manuel d'instructions	FRA	PDF	248 KB
Manuals
Manual	ENG	PDF	27574 KB

Design / Simulation: RM-GXP1100-22F--T3

CAD	Langue	Type de fichier	Taille
3-D model VisuNet GXP 21,5" panel with TCU/PCU and PSU / 3-D-Modell VisuNet GXP 21,5" Panel mit TCU/PCU und PSU	ALL	STP	16297 KB
3-D model VisuNet GXP 21,5" system with EXTA4 keyboard and scanner-holder / 3-D-Modell VisuNet GXP 21,5" System mit EXTA4 Tastatur und Scanner Halterung	ALL	STP	10111 KB
CAD 3-D additional / CAD 3-D additional	ALL	STP	7615 KB

Approvals: RM-GXP1100-22F--T3

Certificates	Identification	Langue	Type de fichier	Taille
ATEX Certificate	BVS 17 ATEX E 036 X	ALL	PDF	1640 KB
China SITIIAS CCC Ex Certificate	2020322309003371 (Singapore)	ALL	PDF	2218 KB
IECEx Certificate of Conformity	IECEx BVS 17.0029X	ALL	LINK	---
South Africa MASC	MASC S/21-8152X	ALL	PDF	771 KB
UL Hazardous Location	E492874 (NRAG, NRAG7)	ALL	PDF	405 KB
United Kingdom	CML 21UKEX3529X	ALL	PDF	155 KB
Control Drawings
Control drawing UL / Control drawing UL		ALL	PDF	80 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-3629D	ALL	PDF	235 KB

Produits associés : RM-GXP1100-22F--T3

Accessories

	VisuNet RM Shell 5 (2019 LTSC) Thin Client Firmware
	Thin Client Firmware for VisuNet Remote Monitors, Box Thin Clients and Tablet Thin Clients (mobile), Innovative firmware to support easy integration and management of remote monitors and thin clients, Supports installation of third-party applications, such as Citrix Receiver and Java Runtime, Based on Microsoft® Windows 10 IoT Enterprise LTSC 2019, Microsoft Universal Write Filter, firewall, USB lock-down, and virus scanner support for maximum system security, Auto connect to host systems after RM startuppa

	DKX4-101 Raritan Dominion KVM-over-IP Switch
	Raritan Dominion KVM-over-IP Switch, Allows direct connection from a VisuNet Remote Monitor (with RM Shell 5.2 or newer) to a host system, Supports concurrent remote and local access to an Operator Workstationpa

	DATL-FO-SM-LC-SC-15 Fiber Optic Single-Mode Breakout Cable
	Fiber Optic Single-Mode Breakout Cable , Military-grade fiber optic single-mode cable for easy connectivity of Pepperl+Fuchs thin client / PC unitspa

	DATL-FO-SM-LC-LC-15 Fiber Optic Single-Mode Breakout Cable
	Fiber Optic Single-Mode Breakout Cable , Military-grade fiber optic single-mode cable for easy connectivity of Pepperl+Fuchs thin client / PC unitspa

	DPU1100-J1-22F* Display Unit
	Display Unit, 10 point multi-touch sensor option allows design of modern user interfaces, Highly resistant to cleaning agents with stainless steel bezel and seamless glass design, Design optimized for easy cleanability, Low-power consumption and heat dissipation due to LED backlight technologypa

	PSU1100-J1-DC-N0 DC Power Supply
	DC Power Supply, Certified for ATEX and IECEx Zone 1/21, Galvanic isolation between input and output, Provides an output power up to 80 W at 24 V DC, Fully IP66 ratedpa

	PSU1100-J1-AC-N0 AC Power Supply
	AC Power Supply, Certified for ATEX and IECEx Zone 1/21, Galvanic isolation between input and output, Provides an output power up to 80 W at 24 V DC, Fully IP66 ratedpa

	Mounting Options Accessories for VisuNet GXP
	21.5 inch Full HD display, Enclosure and mounting options for the GXP display unit, Ideally positioned cable glands for all necessary connections, 304 stainless steel constructionspa

	VisuNet Control Center 4 Thin Client Firmware
	Additional Management tool for VisuNet Remote Monitors and Box Thin Clients, User-friendly, centralized management tool, Remotely configure (e.g., IP address) Remote Monitors, Create and edit remote profiles (e.g. a RDP connection profile) on a Remote Monitor, Copy profiles from one Remote Monitor to another Remote Monitor, Monitor the operators screen and support them remotely via "session shadowing"pa

	VisuNet RM Shell 5 (2016 LTSB) Thin Client Firmware
	Thin Client Firmware for VisuNet Remote Monitors and Box Thin Clients, Innovative firmware to support easy integration and management of remote monitors and thin clients, Supports installation of third-party applications, such as Citrix Receiver and Java Runtime, Based on Microsoft® Windows 10 IoT Enterprise LTSB 2016, Microsoft Universal Write Filter, firewall, USB lock-down, and virus scanner support for maximum system security, Auto connect to host systems after RM startuppa

	VISUNET-RM-SHELL5-CC Control Center License Key
	VisuNet Control Center License Key for RM Shell 5, Enables easy, centralized management of a Remote Monitor via the VisuNet Control Centerpa

	VISUNET-RM-SHELL5-DRDC DRDC License Key
	DRDC License Key for RM Shell 5, Allows you to directly connect from a VisuNet Remote Monitor to a virtualized Emerson DeltaV systempa

	VISUNET-RM-SHELL5-PRO PRO license key
	PRO License Key for RM Shell 5, Restricted Web browser (Internet Explorer-based): Allows the secure direct access of HTML-based MES and SCADA systems, Restricted Web browser (Chrome-Engine-based): HTML5 compatible web browser that enables the secure access of websites and web-applications., Desktop Sharing: Clone a Remote Monitor to work with one host system from several Remote Monitors simultaneously, Raritan KVM Profile: Client allows to directly connect to Raritan Dominion KX II-101 V2 KVM-Switchpa

	DATL-FO-MM-* Fiber Optic Multi-Mode Breakout Cable
	Fiber Optic Multi-Mode Breakout Cable , Military-grade fiber optic multi-mode cable for easy connectivity of Pepperl+Fuchs thin client / PC units, Available with duplex LC to LC or LC to SC connectorspa

	1002MC-SX Fiber Optic Media Converter (multi-mode)
	Gigabit Industrial Media Converter, Converts 10, 100, and 1000BASE-T to 1000BASE-SX, Supports multi-mode (50/125 µm) up to 550 m, Redundant power inputs (10 ... 30 V DC), CE approved and UL listed for Class I, Div. 2pa

	DATL-IDM-DB-S-XX00-N0 Connecting cable
	1 m connector cable for corded handheld reader with M12 connector to open cable end, Connector cable for wired 1-D Scanner IDM-Z1-16x-D-1D-J1-S-* and 2-D Scanner IDM-Z1-26x-D-2D-J1-S* and Bluetooth Basestation IDM-Z1-x6x-B-J1-BT-N0, 4-wire with ferrules, IDM Scanner connection via M12-connector, Note: Supports only RS232 Scanner/Basestationpa

	SCANNER-HOLDER-U1-XX00-N0 Scanner holder for 1-D/2-D code handheld readers for VisuNet GXP 21.5"
	Stainless steel holder for for IDM-Z1- handheld readers, compatible with AG-XX00 housing, Mounting bracket, Simple and fast mounting, Compatible with AG-XX00 housing (adapter included), Compatible with 1-D/2-D code handheld readers such as the IDM and Ident-Ex® portfoliospa

	HOLDER-BRACKET-XX00-IDMx61-B-N Bracket for 1-D/2-D code handheld readers for VisuNet GXP 21.5"
	Stainless steel bracket to mount IDM-Zx-x6x-B-Jx-BT-N0 base station to AG-XX00 housing, Mounting bracket, Simple and fast mounting, Compatible with AG-XX00 housing (adapter included), Compatible with 1-D/2-D code handheld reader base stations and chargerspa

	IDM-Z1-x60-D-* Corded 1-D and 2-D Handheld Reader for Zone 1/21
	Corded 1-D and 2-D Handheld Reader for Zone 1/21, Approved for Zone 1 and 21 (ATEX and IECEx), All 1-D standard barcode families supported, 2-D model supports Data Matrix, QR, and other two-dimensional codes, Fall tested from 2 m to ensure reliabilitypa

	IDM-Z1-x61-M-* Bluetooth® 1-D and 2-D Handheld Reader for Zone 1/21
	Bluetooth® 1-D and 2-D Handheld Reader for Zone 1/21, Approved for Zone 1 and 21 (ATEX and IECEx), All 1-D standard barcode families supported, 2-D model supports Data Matrix, QR, and other two-dimensional codes, Fall tested from 2 m to ensure reliabilitypa

	1002MC-LX-10 Fiber Optic Media Converter (single-mode)
	Gigabit Industrial Media Converter, Converts 10/100/1000BaseT to 1000BaseLX, Supports Single Mode (7-10/125µm) up to 10 KM, Interfaces: LC connector (fiber optic) & RJ45 port, Redundant Power Inputs (10-30 VDC), Mounting: DIN Rail 35 mm, Approvals: CE, UL Class I Div 2pa

	TCU1100-* (Intel® Atom Apollo Lake Processor) Thin Client Unit (TCU)
	Thin Client Unit, Modular, lightweight design, Low-power design with minimal heat dissipation, VisuNet RM Shell installed, High connectivity flexibility due to multiple interface options, Certified for ATEX and IECEx Zone 1/21, UL listed for USA and Canada, IP66pa

	EXTA4--K4 (2020 Generation) Ex i keyboard with touch pad
	Ex i keyboard with touch pad, Degree of protection: IP66, Stainless steel housing, National layout variants available for US, GER and FR, PC-compatible-keyboard with 105 short stroke keys, Designed for use in Zone 1/21 and Zone 2/22 hazardous areas, USB or PS/2 interface with USB cable, UL listed for USA and Canada, Class I, Div. 2 (UL HazLoc Equipment) or Class I, II, III, Div. 2 (UL Hazloc Component)pa

	EXTA4--K6 (2020 Generation) Ex i keyboard with joystick
	Ex i keyboard with joystick, Degree of protection: IP66 (housing), IP65 (front panel), Stainless steel housing, National layout variants available for US, GER and FR, PC-compatible-keyboard with 105 short stroke keys, Designed for use in Zone 1/21 and Zone 2/22 hazardous areas, USB or PS/2 interface with USB cable, UL listed for USA and Canada, Class I, Div. 2 (UL HazLoc Equipment)pa

	EXTA4--K8 (2020 Generation) Ex i keyboard with optical trackball
	Ex i keyboard with optical trackball, Degree of protection: IP 65, Stainless steel housing, National layout variants available for US, GER and FR, PC-compatible-keyboard with 105 short stroke keys, Designed for use in Zone 1/21 and Zone 2/22 hazardous areas, USB or PS/2 interface with USB cable, UL listed for USA and Canada, Class I, Div. 2 (UL HazLoc Equipment) or Class I, II, III, Div. 2 (UL Hazloc Component)pa

	VisuNet RM Shell 6 Upgrade-Package Thin Client Firmware
	VisuNet RM Shell 6 Upgrade-Package for VisuNet Remote Monitors and Box Thin Clients, Upgrade HMI devices from RM Shell 5 to RM Shell 6 (based on Windows® 10 IoT LTSC 2021), Easy download of new images, Contains COA label that licenses the thin client for the new operating systempa

Remarques générales sur les informations produit de Pepperl+Fuchs

Accès direct

Pepperl+Fuchs Eurl
12 Avenue des Tropiques
91955 Courtaboeuf Cedex
France
info@fr.pepperl-fuchs.com
phone +33 1 60921300

Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.

Operator Workstation (RM) RM-GXP1100-22F-*-T3*

Les experts de Pepperl+Fuchs fournissent une réponse dans les 48 heures à toutes les questions posées …

Caractéristiques techniques RM-GXP1100-22F-*-T3*

Classifications

Details: RM-GXP1100-22F-*-T3*

Product Documentation: RM-GXP1100-22F-*-T3*

Design / Simulation: RM-GXP1100-22F-*-T3*

Approvals: RM-GXP1100-22F-*-T3*

Produits associés : RM-GXP1100-22F-*-T3*