Línea de servicio de Sensores Industriales
Atención al cliente para protección contra explosiones
Advanced Diagnostic Kit KT-MB-DMA
FieldConnex® Fieldbus
- Comprehensive diagnostics for the fieldbus physical layer
- Module and motherboard for retrofit of any installation
- Precise measurements through passive circuits
- For commissioning, online monitoring and troubleshooting
- For FOUNDATION Fieldbus H1 and PROFIBUS PA
- Installation in Zone 2/Class I, Div. 2
- System state and fault indication via LEDs
- Display of data in the safety of the control room
- Full software integration into PCS and PAM possible
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Descargue la hoja de datos completa en PDF:
Extracto de la hoja de datos: Información técnica del KT-MB-DMA
| Descripción del producto |
|---|
| Advanced diagnostic kit for retrofitting advanced diagnostics |
| General specifications | ||
|---|---|---|
| Design / Mounting | Motherboard based | |
| Installation in hazardous area | Zone 2 / Div. 2 | |
| Supply | ||
| Rated voltage | 19.2 ... 35 V | |
| Rated current | 110 ... 30 mA | |
| Power dissipation | max. 2 W | |
| Fieldbus connection | ||
| Number of segments | 4 | |
| Fieldbus type | FOUNDATION Fieldbus/PROFIBUS PA | |
| Indicators/operating means | ||
| LED PRI PWR | green: on, primary bulk power supply connected | |
| LED SEC PWR | green: on, secondary bulk power supply connected | |
| LED Seg 1...4 | yellow: bus activity; red 2 Hz flashing: alarm; red: hardware error | |
| Fault signal | VFC alarm 1 A, 50 V DC, normally closed | |
| DIP switch | diagnostic address 1...247, binary coded | |
| Interface | ||
| Interface type | diagnostic bus: RS 485 | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2004/108/EC | EN 61326-1:2006 | |
| Standard conformity | ||
| Electromagnetic compatibility | NE 21 | |
| Degree of protection | IEC 60529 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | < 95 % non-condensing | |
| Shock resistance | 15 g 11 ms | |
| Vibration resistance | 1 g , 10 ... 150 Hz | |
| Mechanical specifications | ||
| Connection type | screw terminal , pluggable | |
| Core cross section | 2.5 mm2 | |
| Housing material | Polycarbonate | |
| Degree of protection | IP20 | |
| Mass | approx. 290 g | |
| Dimensions | ||
| Height | 220 mm | |
| Width | 50 mm | |
| Depth | 162 mm | |
| Mounting | DIN rail mounting | |
| International approvals | ||
| FM approval | ||
| FM certificate | FM 19 US 0015 X and FM 19 CA 0011 X | |
| FM marking | AEx/Ex ec IIC T4 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242692 |
| ECLASS 12.0 | 27242692 |
| ECLASS 11.0 | 27242692 |
| ECLASS 10.0.1 | 27242692 |
| ECLASS 9.0 | 27242692 |
| ECLASS 8.0 | 27242692 |
| ECLASS 5.1 | 27242692 |
| ETIM 9.0 | EC001604 |
| ETIM 8.0 | EC001604 |
| ETIM 7.0 | EC001604 |
| ETIM 6.0 | EC001604 |
| ETIM 5.0 | EC001604 |
| UNSPSC 12.1 | 39121008 |
Details: KT-MB-DMA
Informative Literature: KT-MB-DMA
| Literature | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|
| Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron | ENG | 361 KB | |
| Application Report - Digital Communication in Steel-Plate Manufacturing | ENG | 470 KB |
Product Documentation: KT-MB-DMA
| Product information | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|
| Technical Information Advanced Diagnostic with Yokogawa Plant Resource Manager (PRM) | ENG | 2551 KB | |
| Manuals | |||
| Manual | ENG | 25397 KB | |
Approvals: KT-MB-DMA
| Certificates | Número de Certificado | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|---|
| Canada FM | FM 19 CA 0011X | ALL | 356 KB | |
| USA FM | FM 19 US 0015X | ALL | 213 KB |
Software: KT-MB-DMA
| Software Tools | Liberar Info | Tipo de archivo | Tamaño |
|---|---|---|---|
| Diagnostic Manager / Diagnostic Manager | 2.2.4.3610 | ZIP | 87499 KB |
Productos asociados: KT-MB-DMA
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
|
||||||
Desde las decisiones a la planificación, instalación y puesta en marcha, hasta el funcionamiento y mantenimiento: descubra cómo sacar el máximo partido de su infraestructura de bus de campo…
Obtenga la infraestructura con el mejor rendimiento gracias al nuevo dispositivo portátil para diagnóstico de bus de campo FDH-1
Descargas gratuitas
Obtenga su paquete de integración del ADM gratis para su sistema DCS.
Descarga del paquete de integración 800xA de ABB
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
© 2024 Todos los derechos reservados
Pepperl + Fuchs es líder en el desarrollo y la fabricación de sensores electrónicos y componentes para el mercado de la automatización global. Su incesante innovación, calidad duradera y crecimiento constante garantizan el éxito continuado, desde hace más de 70 años. Pepperl + Fuchs emplea a 6.300 personas en todo el mundo y cuenta con fábricas en Alemania, EE.UU., Singapur, Hungría, Indonesia y Vietnam, la mayoría de ellas con certificado ISO 9001.