Ipari érzékeléstechika
+36 88 545 902
+36 88 560 472
Leválasztók, jelátalakítók
+36 88 545 902
+36 88 560 472

Elevator light grid AL2109-P-1820-3403/40b/49/143

AL2109-P-1820-3403/40b/49/143
  • Low-profile, high resolution light grid for monitoring locking edges on elevators and accesses
  • Thru-beam light grid with integrated controller
  • In accord with EN81-70 and EN12015/16
  • Dense monitoring field with up to 135 beams ensures that small objects are detected
  • Object detection up to distance of zero
  • Automatic beam crossing
  • Insensitive to reflection and ambient light

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:


Adatlap kivonata: Műszaki adatok  AL2109-P-1820-3403/40b/49/143

Termék leírása
High resolution light grid for detecting people and objects
General specifications
Effective detection range0 ... 3500 mm
Threshold detection range3500 mm
Light sourceIRED
Light typemodulated infrared light , 950 nm
Field height1800 mm
Beam crossoverautomatic, 3x/5x/7x (depending on distance between transmitter/receiver)
Beam spacing90 mm
Number of beams61 ... 135 (dynamic)
Opening angleEmitter: < 20 ° , Receiver: < 6 °
Ambient light limit> 100000 Lux
Accessories provided2 connecting cable with M12 connector, approx. 300 mm
Functional safety related parameters
MTTFd180 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicatorLED red (in receiver): Illuminates after connecting operating power, out when object is detected,
Electrical specifications
Operating voltage11 ... 30 V DC
Ripple10 %
No-load supply current< 180 mA
Output
Switching typelight/dark on selectable programmable
Signal output1 PNP and 1 NPN, short-circuit protected
Switching voltagemax. 30 V DC
Switching current100 mA
Switching frequency< 3 Hz
Response time< 100 ms
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/ECEN 12015:2014 EN 12016:2013
Standard conformity
Product standardEN 60947-5-2:2007+A1:2012
IEC 60947-5-2:2007 + A1:2012
StandardsEN 81-70:2003/A1:2004; Section 5.2.4 EN 81-20:2014; Section 5.3.6.2.2.1
Taking into account object detection in accordance with the datasheet specification for the monitoring field.
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-20 ... 65 °C (-4 ... 149 °F)
Mechanical specifications
Profile width9 mm
Degree of protectionIP54
ConnectionM8 x 1 connector, 4-pin
Material
HousingAluminum
Optical faceplastic
Mass2000 g (device)
Dimensions
Width9 mm
Depth34 mm
Length2000 mm

Classifications

SystemClasscode
ECLASS 13.027270910
ECLASS 12.027270910
ECLASS 11.027270910
ECLASS 10.0.127270910
ECLASS 9.027270910
ECLASS 8.027270910
ECLASS 5.127270910
ETIM 9.0EC002549
ETIM 8.0EC002549
ETIM 7.0EC002549
ETIM 6.0EC002549
ETIM 5.0EC002549
UNSPSC 12.139121528

Details: AL2109-P-1820-3403/40b/49/143

Function

The AL2109 elevator light grid is used to protect elevator doors or for passenger monitoring and access control. Its special features include its dynamic beam crossover with up to 135 active sensors, object detection down to nearly zero millimeters and an ambient light limit greater than 100,000 Lux. The evaluation electronics and the power supply are completely integrated into the emitter and receiver element, so that no external equipment is necessary for operation. The system offers flexible mounting options and meets the newest standards in accordance with EN 81-70 and EN 12016.

Informative Literature: AL2109-P-1820-3403/40b/49/143

Nyelvválasztás:
LiteratureNyelvFájltípusFájlméret
Brochure - Automation Light Grids: LGS and LGM SeriesENGPDF1965 KB

Product Documentation: AL2109-P-1820-3403/40b/49/143

Nyelvválasztás:
Brief InstructionsNyelvFájltípusFájlméret
Instruction leaflet / BeipackzettelALLPDF413 KB

Design / Simulation: AL2109-P-1820-3403/40b/49/143

Nyelvválasztás:
CADNyelvFájltípusFájlméret
CAD 3-D / CAD 3-DALLSTP52 KB
CAD Portal / CAD PortalALLLINK---

Approvals: AL2109-P-1820-3403/40b/49/143

Nyelvválasztás:
CertificatesTanúsítvány sz.NyelvFájltípusFájlméret
Canada, USA General PurposeUL-US-2133488-0 / UL-CA-2133488-0ALLPDF545 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-1903CALLPDF226 KB

Kapcsolódó termékek: AL2109-P-1820-3403/40b/49/143

Accessories
Mounting set for backboard mounting of the elevator light curtains AL2109, Variety of possible uses in the areas of doors and elevators, Simple and fast mountingfa
Mounting set for mechanical extension of the elevator light curtains AL2109, Variety of possible uses in the areas of doors and elevators, Simple and fast mounting, Material: Aluminum housingfa
Mounting set for lateral mounting of the elevator light curtains AL2109, Variety of possible uses in the areas of doors and elevators, Simple and fast mountingfa