Voltage Repeater KFD2-VR-Ex1.19-Y109129

1-channel isolated barrier
24 V DC supply (Power Rail)
Voltage input -10 V ... 10 V
Transmission frequency up to 50 kHz
Voltage output -10 V ... 10 V

Technical Data
Details
Informative Literature
Product Documentation
Design / Simulation
Approvals
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:

Adatlap kivonata: Műszaki adatok KFD2-VR-Ex1.19-Y109129

General specifications
Signal type		Analog input
Supply
Connection		Power Rail or terminals 11+, 12-
Rated voltage		20 ... 35 V DC
Ripple		within the supply tolerance
Rated current		< 30 mA
Input
Connection side		field side
Connection		terminals 4+, 5-
Input resistance		min. 10 MΩ
Transmission range		-10 ... 10 V
Offset voltage/current		< 10 mV / < 1 µA
Output
Connection side		control side
Connection		terminals 7-, 8+
Voltage		-10 ... 10 V
Output resistance		max. 20 Ω
Transfer characteristics
Cut-off frequency		50 kHz (-3 dB)
Deviation
	After calibration	± 30 mV at 20 °C (68 °F)
	Influence of ambient temperature	< 0.01 % of span per K
Rise time		≤ 10 µs
Galvanic isolation
Output/power supply		functional insulation, rated insulation voltage 50 V AC
Indicators/settings
Display elements		LED
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 110 g
Dimensions		20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1
	Height	100 mm
	Width	20 mm
	Depth	115 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		BAS 01 ATEX 7262
	Marking	II (1)GD, I (M1) [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I (-20 °C ≤ T_amb ≤ 60 °C) , [circuit(s) in zone 0/1/2]
	Voltage	15.5 V
	Current	7.2 mA
	Power	28 mW
Supply
	Maximum safe voltage	250 V (Attention! The rated voltage is lower.)
Output
	Maximum safe voltage	250 V (Attention! The rated voltage is lower.)
Certificate		BASEEFA 10 ATEX 0079X
	Marking	II 3G Ex ec IIC T4 Gc [device in zone 2]
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015+A1:2018
International approvals
FM approval
	Control drawing	116-0129
UL approval
	Control drawing	116-0173 (cULus)
CSA approval
	Control drawing	116-0132
IECEx approval
	IECEx certificate	IECEx BAS 10.0040X
	IECEx marking	Ex ec IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210125
ECLASS 12.0	27210120
ECLASS 11.0	27210120
ECLASS 10.0.1	27210120
ECLASS 9.0	27210120
ECLASS 8.0	27210120
ECLASS 5.1	27210120
ETIM 9.0	EC002653
ETIM 8.0	EC002653
ETIM 7.0	EC002653
ETIM 6.0	EC002653
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: KFD2-VR-Ex1.19-Y109129

Function

This isolated barrier is used for intrinsic safety applications. It transfers voltage signals from hazardous areas to safe areas.

The input voltage of the terminals 4 and 5 is transferred to the terminals 7 and 8. The terminals 4 and 8 have the same polarity.

It repeats voltage signals from magnetic pickups, transducers, and flow meters between -10 V... 10 V.

This barrier is designed for frequencies up to 50 kHz.

Informative Literature: KFD2-VR-Ex1.19-Y109129

Literature	Nyelv	Fájltípus	Fájlméret
Application Report - Energy Generation in Wastwater Treatment Plants	ENG	PDF	532 KB
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB
Application Report - Sicherer Brennstofftransport in Kohlekraftwerken	ENG	PDF	391 KB
Application Report - Water Inlet in Wastewater Treatment Plants	ENG	PDF	526 KB

Product Documentation: KFD2-VR-Ex1.19-Y109129

Safety and Security Documentation	Nyelv	Fájltípus	Fájlméret
Használati útmutató	HUN	PDF	71 KB
Manuals
Manual	ENG	PDF	3685 KB

Design / Simulation: KFD2-VR-Ex1.19-Y109129

CAD	Nyelv	Fájltípus	Fájlméret
CAD 3-D / CAD 3-D	ALL	STP	105 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
EPLAN macro EDZ / EPLAN Makro EDZ	ALL	EDZ	55 KB

Approvals: KFD2-VR-Ex1.19-Y109129

Certificates	Tanúsítvány sz.	Nyelv	Fájltípus	Fájlméret
Baseefa Ex ec IECEx Certificate of Conformity	IECEx BAS 10.0040X	ALL	LINK	---
Canada UL cUL	E106378 cUL (QUZW7)	ALL	LINK	---
Europe Baseefa II (1) D I (M1) II (1) G	BAS 01 ATEX 7262	ALL	PDF	2608 KB
Europe Baseefa II 3 G	Baseefa 10 ATEX 0079X	ALL	PDF	2069 KB
USA Canada UL Hazardous Location Certificate of Compliance cULus UL E106378	CoC 20140902 - E106378 RepRef 20011030	ALL	PDF	429 KB
USA FM	CoC 1Z2A1.AX	ALL	PDF	78 KB
USA UL	E106378 UL (QUZW)	ALL	LINK	---
United Kingdom CML UK-Type Examination Certificate UKEX Category (1) D UKEX Category (1) G UKEX Category (M1)	CML 21UKEX2897	ALL	PDF	168 KB
Control Drawings
Control drawing UL / Control drawing UL		ALL	PDF	1092 KB
Control drawing FM / Control drawing FM		ALL	PDF	58 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0054C	ALL	PDF	54 KB

Kapcsolódó termékek: KFD2-VR-Ex1.19-Y109129

Matching System Components

	KFD2-EB2 Power Feed Module
	Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indicationpa

	UPR-03 Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-S Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-M Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 1.6 m (5 foot), simple to customize to application space, Eliminates daisy-chainspa

	K-DUCT-BU Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

	K-DUCT-BU-UPR-03 Profile Rail
	Cable trunking with integrated Power Rail UPR-03, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Provides DC supply voltage to all equipped K-System modules, Standard length 1.8 m (5.8 ft), simple to customize to application space, With end caps UPR-E, cover and mounting aidspa

Accessories

	KF-ST-5GN Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces greenpa

	KF-ST-5BU Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces bluepa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

General Notes Relating to Pepperl+Fuchs Product Information

Gyorshivatkozások

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
phone +36 88 545 902

A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.