Ipari érzékeléstechika
+36 88 545 902
+36 88 560 472
Leválasztók, jelátalakítók
+36 88 545 902
+36 88 560 472

Nem rendelhető

Nem rendelhető
Nem rendelhető

3-D LiDAR sensor OMD10M-R2300-B23-V1V1D-4S

OMD10M-R2300-B23-V1V1D-4S
  • High angle resolution
  • Can be aligned using an integrated pilot laser
  • Measuring method PRT (Pulse Ranging Technology)
  • Compact design
  • High pollution tolerance

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:


Adatlap kivonata: Műszaki adatok  OMD10M-R2300-B23-V1V1D-4S

Termék leírása
R2300, 3-D LiDAR sensor for object detection and positioning, measuring range to object up to 10 m, Ethernet
General specifications
Measuring range0.2 ... 4 m (black 10%)
0.2 ... 10 m (white 90%)
Reference targetKodak white (90%)
Light sourcelaser diode
Laser nominal ratings
NoteLASER RADIATION , DO NOT STARE INTO BEAM
Laser class1
Wave lengthMeasuring laser infrared light 905 nm
Pilot laser red light 650 nm
Beam divergenceMeasuring laser: transversal 2 mrad , longitudinal 9.5 mrad
Pilot laser: 0.3 mrad
Pulse lengthMeasuring laser: 5.2 ns
Pilot laser: 1.1 µs
Repetition rate90 kHz
max. pulse energyMeasuring laser: < 81 nJ
Pilot laser: < 60 nJ
Measuring methodPulse Ranging Technology (PRT)
Frame rate25 fps
12.5 fps
Scan rate100 s-1
50 s-1
Scanning zone100° horizontal, 9° vertical
Diameter of the light spot25 mm x 100 mm at 10 m
Ambient light limit60000 Lux
Resolution1 mm
Functional safety related parameters
MTTFd75 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green
Data flow indicatorLED yellow: active ethernet
LED green: Ethernet link
Function indicatorLED red: fault
Control elementsnone
Parameterization indicatornone
Electrical specifications
Operating voltage10 ... 30 V
Ripple10 % within the supply tolerance
No-load supply current≤ 300 mA / 24 V DC
Power consumption< 8 W
Time delay before availability< 20 s
Interface
Interface typeFast Ethernet
ProtocolHTTP , UDP/IP
Input/Output
Input/output typenone
Conformity
Product standardEN 60947-5-2
Laser safetyEN 60825-1:2014
Measurement accuracy
Measuring speed50000 measurements per second
Measured value noisetyp. 30 mm , 1 sigma
Angle resolution0.1° at 12.5 Hz
Absolute accuracytyp. ± 30 mm
Repeat accuracy< 12 mm
Approvals and certificates
Protection classIII (operating voltage 50 V)
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-30 ... 50 °C (-22 ... 122 °F)
Storage temperature-30 ... 70 °C (-22 ... 158 °F)
Relative humidity95 % , no moisture condensation
Mechanical specifications
Degree of protectionIP65
Connection4-pin, M12x1 connector, standard (supply) , shield connected on both sides
4-pin, M12x1 socket, D-coded (LAN)
Material
HousingABS + PC
Optical facePC (Polycarbonate)
Massapprox. 0.27 kg
Tightening torque, fastening screws1.5 Nm
Dimensions
Height57 mm
Width96 mm
Length69 mm
Number of mounting holes4 , max. thread depth 9 mm

Classifications

SystemClasscode
ECLASS 13.027270913
ECLASS 12.027270913
ECLASS 11.027270801
ECLASS 10.0.127270801
ECLASS 9.027270801
ECLASS 8.027270801
ECLASS 5.127270801
ETIM 9.0EC001825
ETIM 8.0EC001825
ETIM 7.0EC001825
ETIM 6.0EC001825
ETIM 5.0EC001825
UNSPSC 12.141111613

Details: OMD10M-R2300-B23-V1V1D-4S

Function

The 3-D LiDAR sensor uses Pulse Ranging Technology (PRT). So the sensor reaches a large detection range for small light spot widths.

The device has a measuring angle of 100°. With 4 scanning layers the device produces 3-D-data.

The optional switchable pilot laser is projected accurately on the scanning layers. Thus an optimal orientation of the sensor is possible.

Output of the measuring values as well as the parameterization takes place via standard Ethernet-interface.

Informative Literature: OMD10M-R2300-B23-V1V1D-4S

Nyelvválasztás:
LiteratureNyelvFájltípusFájlméret
Product Overview - LiDAR SensorsENGPDF2253 KB
Application Report - Reliable Load Detection during TransferENGPDF196 KB
Application Report - Reliable Navigation of Autonomous Vehicles in IntralogisticsENGPDF174 KB

Product Documentation: OMD10M-R2300-B23-V1V1D-4S

Nyelvválasztás:
Protocol InformationNyelvFájltípusFájlméret
R2300 Ethernet Protocol Description / R2300 Ethernet ProtokollbeschreibungALLPDF4059 KB

Design / Simulation: OMD10M-R2300-B23-V1V1D-4S

Nyelvválasztás:
CADNyelvFájltípusFájlméret
CAD Portal / CAD PortalALLLINK---
CAD-files 3-D / CAD-Dateien 3-DALLSTP1831 KB

Approvals: OMD10M-R2300-B23-V1V1D-4S

Nyelvválasztás:
Declaration of ConformityTanúsítvány sz.NyelvFájltípusFájlméret
EU Declaration of Conformity (P+F)TDOC-4893DHUNHUNPDF220 KB
UK Declaration of Conformity (P+F)TDOC-6953AENGENGPDF194 KB

Kapcsolódó termékek: OMD10M-R2300-B23-V1V1D-4S

Accessories

Male connector M12 straight D-coded 4-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa

Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa

Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa

Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable grey, shieldedfa
M12 protective cap set (connector + socket) for series LS610 / LS611fa
Mounting aid for R2300 series, Quick clamp and adjustment system, Simple and fast mountingfa