Fiber optic sensor OJ500-M1K-E23
- Light-on/dark-on parameterisable
- Adjustable sensor head
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Adatlap kivonata: Műszaki adatok OJ500-M1K-E23
| Termék leírása |
|---|
| Fiber optic sensor for glass fiber optics |
| General specifications | ||
|---|---|---|
| Sensor range | up to 100 mm (LMR 18-3,2-1,0-K4) |
|
| Detection range | up to 600 mm (LME 18-2,3-0,5-K3) |
|
| Light source | LED | |
| Light type | modulated infrared light | |
| Ambient light limit | 40000 Lux | |
| Temperature influence | ≤ 0.5 mm/K | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Function indicator | LED yellow: switching state LED red: stability control (flashing) |
|
| Control elements | programming switch: bright/dark changeover switch selection of the operating frequency selection of the switching frequency pulse extension stability control dynamic/static |
|
| Control elements | Sensing range adjuster | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Ripple | 10 % | |
| No-load supply current | ≤ 35 mA | |
| Output | ||
| Stability alarm output | 1 PNP, active when falling short of the stability control | |
| Switching type | light/dark on | |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector | |
| Switching voltage | max. 30 V DC | |
| Switching current | ≤ 200 mA | |
| Switching frequency | ≤ 1.5 kHz / 200 Hz switchable | |
| Response time | ≤ 0.3 ms at 1.5 kHz ≤ 2.5 ms at 200 Hz | |
| Timer function | pulse extension 20 ms, switchable | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Approvals | CE | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 80 °C (-40 ... 176 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | M16 terminal compartment, core cross section ≤ 2.5 mm2 | |
| Material | ||
| Housing | PBT | |
| Optical face | Scratch resistant mineral glass lens | |
| Mass | 100 g | |
| Dimensions | ||
| Height | 30 mm | |
| Width | 30 mm | |
| Depth | 102 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270905 |
| ECLASS 12.0 | 27270905 |
| ECLASS 11.0 | 27270905 |
| ECLASS 10.0.1 | 27270905 |
| ECLASS 9.0 | 27270905 |
| ECLASS 8.0 | 27270905 |
| ECLASS 5.1 | 27270905 |
| ETIM 9.0 | EC002651 |
| ETIM 8.0 | EC002651 |
| ETIM 7.0 | EC002651 |
| ETIM 6.0 | EC002651 |
| ETIM 5.0 | EC002651 |
| UNSPSC 12.1 | 39121528 |
Details: OJ500-M1K-E23
Product Documentation: OJ500-M1K-E23
| Brief Instructions | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Fiber optics for OJ500-M1K fiber optic amplifier | ENG | 210 KB | |
| Instruction leaflet / Beipackzettel | ALL | 114 KB |
Design / Simulation: OJ500-M1K-E23
| CAD | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 166 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: OJ500-M1K-E23
| Declaration of Conformity | Tanúsítvány sz. | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2290C | ALL | 226 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6946 | ALL | 223 KB |
Kapcsolódó termékek: OJ500-M1K-E23
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
+36 88 545 902
© 2024 Minden jog fenntartva.
A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.