Read/write station IUT-F190-R4-V1-FR1-06
- Flexible UHF read/write station with medium detection range
- Compact and robust housing for harsh industrial environments
- Switchable antenna polarization guarantees reliable tag detection and enhances process flow
- Connection via integrated RS-485 interface
- Multi-tag reading increases productivity
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Adatlap kivonata: Műszaki adatok IUT-F190-R4-V1-FR1-06
| Termék leírása |
|---|
| UHF readwrite station, Russia |
| General specifications | ||
|---|---|---|
| Operating frequency | 866 MHz … 867.6 MHz: Russia Transmission licenses for other countries on request |
|
| Emitted power | 3 ... 800 mW ERP adjustable | |
| Functional safety related parameters | ||
| MTTFd | 210 a | |
| Indicators/operating means | ||
| LED green | Power on | |
| LED yellow | Read/write operation successful | |
| LED blue | Transmission mode | |
| Electrical specifications | ||
| Rated operating voltage | 20 ... 30 V DC , ripple 10 %SS | |
| Current consumption | ≤ 450 mA | |
| Power consumption | ≤ 9 W | |
| Surge protection | category 2 | |
| Interface | ||
| Physical | RS-485 point-to-point connection | |
| Protocol | ASCII | |
| Transfer rate | 1200, 2400, 4800, 9600, 19200, 38400 (default) Bit/s | |
| Standard conformity | ||
| Electromagnetic compatibility | EN 301489-1 EN 301489-3 |
|
| Degree of protection | EN 60529 | |
| Safety | EN 62368-1 | |
| RFID | ISO/IEC 18000-63 | |
| Ambient conditions | ||
| Classification | Environmental condition A (controlled environment) | |
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) (Operation with nontransmission periods, adjustable) -20 ... 60 °C (-4 ... 140 °F) (Continuous transmission mode) |
|
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Pollution degree | 2 | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | connector M12 x 1 | |
| Material | ||
| Housing | PA 6.6 | |
| Base | diecast aluminum | |
| Mass | 810 g | |
| Dimensions | ||
| Height | 63 mm | |
| Width | 112 mm | |
| Length | 114 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280401 |
| ECLASS 12.0 | 27280401 |
| ECLASS 11.0 | 27280401 |
| ECLASS 10.0.1 | 27280401 |
| ECLASS 9.0 | 27280401 |
| ECLASS 8.0 | 27280401 |
| ECLASS 5.1 | 27280401 |
| ETIM 9.0 | EC002998 |
| ETIM 8.0 | EC002998 |
| ETIM 7.0 | EC002998 |
| ETIM 6.0 | EC002998 |
| ETIM 5.0 | EC002998 |
| UNSPSC 12.1 | 43211710 |
Details: IUT-F190-R4-V1-FR1-06
Function
The compact IUT-F190-R4-V1-FR1-06 read/write station operates in the UHF frequency range and is optimized for industrial use at medium distances. The device writes and reads passive transponders according to EPC Gen2 (ISO/IEC 18000-63). The read/write station can be used in Russia. The read/write station is compliant with the relevant radio regulations.
Wide range of options supported for filtering data. The read/write station has an RS-485 interface and is connected via an M12 connector. The user can monitor the status of the read/write station using the integrated LEDs.
The read/write station has a typical detection range of approximately 2 m, which is determined by the transponder used and can be adjusted by the setting of the transmission power. Other influencing factors include the setup and installation of the specific application and the surrounding materials, in particular metal. The separately specified read and write distances for the respective transponders have been determined in a test laboratory under ideal conditions. For the actual read and write distances under real conditions, the combination of read/write station and transponder must be tested in the desired application.
Informative Literature: IUT-F190-R4-V1-FR1-06
| Literature | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Application Report - Clear Identification of Green Tires During Vulcanization | ENG | 320 KB |
Product Documentation: IUT-F190-R4-V1-FR1-06
| Manuals | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Manual IUH-F190-V1-*, IUT-F190-R4-V1* | ENG | 2490 KB | |
| Manual Read / Write Ranges and Passing Speeds RFID | ENG | 3640 KB |
Kapcsolódó termékek: IUT-F190-R4-V1-FR1-06
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Ismerje meg a közepes érzékelési tartományokhoz tervezett, új IUT-F190-B40-et, amely gyorsan és könnyen integrálható OT- és IT-rendszerekbe...
Látogasson el „RFID-központunkba” – ez a speciális weboldal egy, a rádiófrekvenciás azonosítással kapcsolatos tudásbázist tartalmaz. Böngésszen a gyakran feltett kérdések között és tudjon meg többet az elterjedt RFID-alkalmazásokról…
Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
+36 88 545 902
A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.