Switch Amplifier HiC2822

2-channel isolated barrier
24 V DC supply (bus powered)
Dry contact or NAMUR inputs
2 relay contact outputs
Line fault detection (LFD)
Reversible mode of operation
Up to SIL 2 acc. to IEC/EN 61508

Technical Data
Product Documentation
Design / Simulation
Approvals
関連製品
お問い合わせ

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

データシート(PDF):

技術データ HiC2822

General specifications
Signal type		Digital Input
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 2
Supply
Connection		SL1: 1a(-), 1b(-); 2a(+), 2b(+)
Rated voltage		19 ... 30 V DC bus powered via Termination Board
Ripple		≤ 10 %
Rated current		≤ 30 mA
Power dissipation		≤ 600 mW
Power consumption		≤ 600 mW
Input
Connection side		field side
Connection		SL2: 5a(+), 5b(-); 1a(+), 1b(-)
Rated values		acc. to EN 60947-5-6 (NAMUR), see manual for electrical data
Open circuit voltage/short-circuit current		approx. 10 V DC / approx. 8 mA
Switching point/switching hysteresis		1.2 ... 2.1 mA / approx. 0.2 mA
Line fault detection		breakage I ≤ 0.1 mA , short-circuit I ≥ 6.7 mA
Pulse/Pause ratio		min. 20 ms / min. 20 ms
Output
Connection side		control side
Connection		SL1: 8a, 7a; 10a, 9a
Output I		signal ; relay
Output II		signal ; relay
Contact loading		50 V DC / 0.5 A
Minimum switch current		2 mA / 24 V DC
Energized/De-energized delay		≤ 20 ms / ≤ 20 ms
Mechanical life		10⁷ switching cycles
Fault indication output
Connection		SL1: 6b
Output type		open collector transistor (internal fault bus)
Transfer characteristics
Switching frequency		≤ 10 Hz
Galvanic isolation
Output/power supply		basic insulation acc. to EN 50178, rated insulation voltage of 50 V AC
Output/Output		basic insulation acc. to EN 50178, rated insulation voltage of 50 V AC
Indicators/settings
Display elements		LEDs
Control elements		DIP switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Galvanic isolation		EN 50178:1997
Electromagnetic compatibility		EN IEC 61326-3-2:2018 , NE 21:2012 For further information see system description.
Degree of protection		IEC 60529:2001
Input		EN 60947-5-6:2000
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Mass		approx. 110 g
Dimensions		12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D)
	Height	106 mm
	Width	12.5 mm
	Depth	128 mm
Mounting		on termination board
Coding		pin 1 and 2 trimmed For further information see system description.
Data for application in connection with hazardous areas
EU-type examination certificate		BASEEFA 06 ATEX 0093 X
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Input	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
	Voltage	10.5 V
	Current	17.1 mA
	Power	45 mW (linear characteristic)
Supply
	Maximum safe voltage	253 V AC (Attention! U_m is no rated voltage.)
Output
	Contact loading	50 V DC / 0.5 A
	Maximum safe voltage	253 V AC (Attention! The rated voltage can be lower.)
Certificate		PF 08 CERT 1047 X
	Marking	II 3G Ex nA nC IIC T4 Gc
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
FM approval
	Control drawing	16-534FM-12 (cFMus)
UL approval		E106378
	Control drawing	116-0434
IECEx approval
	IECEx certificate	IECEx BAS 06.0026X
	IECEx marking	[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210121
ECLASS 12.0	27210121
ECLASS 11.0	27210121
ECLASS 10.0.1	27210121
ECLASS 9.0	27210121
ECLASS 8.0	27210121
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: HiC2822

Product Documentation: HiC2822

Safety and Security Documentation	言語	ファイルタイプ	ファイルサイズ
Instruction manual	ENG	PDF	168 KB
Functional Safety Manual	ENG	PDF	771 KB
Manuals
System Manual	ENG	PDF	5438 KB

Design / Simulation: HiC2822

CAD	言語	ファイルタイプ	ファイルサイズ
CAD 3-D / CAD 3-D	ALL	STP	2770 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
EPLAN macros H-System devices (EMA) / EPLAN-Makros Geräte H-System (EMA)	ALL	ZIP	3536 KB

Approvals: HiC2822

Certificates	認証番号	言語	ファイルタイプ	ファイルサイズ
Baseefa IECEx Certificate of Conformity	IECEx BAS 06.0026X	ALL	LINK	---
Canada FM	FM19CA0065X	ALL	PDF	374 KB
China SITIIAS CCC Ex Certificate	2020322316001448 (Singapore)	ALL	PDF	1078 KB
Europe Baseefa ATEX Category (M1) ATEX Category (1) GD	Baseefa 06 ATEX 0093X	ALL	PDF	1225 KB
Europe Pepperl+Fuchs ATEX Category 3 G Certificate	PF 08 CERT 1047 X	ALL	PDF	212 KB
Pepperl+Fuchs Functional Safety Assessment	PF 12 CERT 2161	ALL	PDF	64 KB
South Africa MASC	MASC MS/17-2381X	ALL	PDF	745 KB
USA Canada UL Hazardous Location Certificate of Compliance cULus UL E106378	CoC 20170516 - E106378 RepRef 20170516	ALL	PDF	253 KB
USA FM	FM19US0122X	ALL	PDF	346 KB
United Arab Emirates SGS Gulf Limited ECASEx	24-02-101829/E24-02-105322/NB0002	ALL	PDF	602 KB
exida Functional Safety Assessment	P+F 1109-099-C R026 V1R0	ALL	PDF	464 KB
Control Drawings
Control drawing UL / Control drawing UL		ALL	PDF	92 KB
Instruction leaflet / Beipackzettel		ALL	PDF	80 KB
Control drawing FM / Control drawing FM		ALL	PDF	112 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0927D	ALL	PDF	50 KB

関連製品: HiC2822

Accessory of

	HiCTB16-YC3-RRB-AK-CC-DX32 Termination Board
	System board for Yokogawa CENTUM VP, For 32-channel DI card ADV151, For 16 modules, Recommended modules: HiC2822 (DI), HiC2842 (DI), 24 V DC supply, Hazardous area: spring terminals, blue, Non-hazardous area: Yokogawa system connector, 50-pin, Number of modules: 16, Signal type: Digital Input, Manufacturer: Yokogawa, Control system type: CENTUM VPpa

	HiCTB16-FBM-RAC-SC-DI32 Termination Board
	System board for Schneider, Foxboro FBM series, For 16 modules, For 32-channel DI card FBM217, 24 V DC supply, Recommended modules: HiC2822 (DI), HiC2842 (DI), Hazardous area: screw terminals, blue, Non-hazardous area: Sub-D connector (male), 37-pin, Number of modules: 16, Signal type: Digital Input, Manufacturer: Foxboro, Control system type: FBMpa

	HiCTB16-TRX-RAC-PL-DI32 Termination Board
	System board for Schneider Electric, Tricon CX series by Triconex, For 32-channel DI card 3506X, For 16 modules, 24 V DC supply, Recommended modules: HiC2822 (DI), HiC2842 (DI), Hazardous area: pluggable screw terminals, blue, Non-hazardous area: ELCO socket, 56-pin, Number of modules: 16, Signal type: Digital Input, Manufacturer: Triconex, Control system type: Tricon CXpa

General Notes Relating to Pepperl+Fuchs Product Information

クイックリンク

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.