Termination Board HiDTB16-HIM-NLC-SP-AI3201

System board for HIMA, HIMax
For 32-channel card X-AI 3201 (AI)
For 16 modules
Recommended module: HiD2036 (AO)
For gas and fire detectors
Hazardous area: spring terminals, blue
Non-hazardous area: HIMA system connector, 96-pin

Technical Data
Product Documentation
Approvals
お問い合わせ

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

データシート(PDF):

技術データ HiDTB16-HIM-NLC-SP-AI3201

Indicators/settings
Display elements		LED Run, green LED - The HIMax I/O module is supplied with power and is connected to the Termination Board (FTA) via a system cable. LED Field, red LED - The HIMax I/O module detects faults in the connection between HIMax I/O module and Termination Board (FTA).
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2012 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protection		IP20
Connection
	Field side	explosion hazardous area: spring terminals , blue
	Control side	non-explosion hazardous area: HIMA system connector, 96-pin
Core cross section		spring terminals: 0.25 ... 1.5 mm² (24 ... 16 AWG)
Material		housing: polycarbonate, 10 % glass fiber reinforced
Mass		approx. 750 g
Dimensions		300 x 200 x 163 mm (11.8 x 7.9 x 6.42 inch) (W x H x D) , depth including module assembly
	Height	200 mm
	Width	300 mm
	Depth	163 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		CESI 11 ATEX 062
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Non-hazardous area
	Maximum safe voltage	250 V (Attention! U_m is no rated voltage.)
Galvanic isolation
	Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 50303:2000
International approvals
CSA approval
	Control drawing	see control drawing of correspoding modules
IECEx approval
	IECEx certificate	IECEx CES 11.0022
	IECEx marking	[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210120
ECLASS 12.0	27210120
ECLASS 11.0	27210120
ECLASS 10.0.1	27210120
ECLASS 9.0	27210120
ECLASS 8.0	27210120
ECLASS 5.1	27210120
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: HiDTB16-HIM-NLC-SP-AI3201

Product Documentation: HiDTB16-HIM-NLC-SP-AI3201

Product information	言語	ファイルタイプ	ファイルサイズ
Pinout Table	ENG	PDF	70 KB

Approvals: HiDTB16-HIM-NLC-SP-AI3201

Certificates	認証番号	言語	ファイルタイプ	ファイルサイズ
Canada, USA CSA	CoC 70001345	ALL	PDF	136 KB
Europe CESI ATEX Category (1) D ATEX Category (M1) 94/9/EC (ATEX) ATEX Category (1) G	CESI 11 ATEX 062	ALL	PDF	917 KB
Worldwide CESI IECEx Certificate of Conformity	IECEx CES 11.0022	ALL	LINK	---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-2114B	ALL	PDF	49 KB